Long ripped black denim shorts. DIY old jeans shorts

Shorts are a garment most commonly worn in hot weather. The shorts market has hundreds of ready-made models. However, in order to emphasize your authenticity, you can sew your own shorts using modern patterns. If you don't have a lot of experience in modeling and designing clothes, then you can take the easier route and create shorts from old jeans. In this case, you will become the owner of a truly exclusive item and save money.

bustle.com

You can sew denim shorts without special drawings and professional sewing equipment. Even a beginner armed with tips and tricks can create a quality product that is not ashamed to wear to a party or to the beach.

Which jeans fit

The first step to creating jeans shorts is to decide which pair of old pants you can use as a base. The choice of model will depend on your preference. For example, if you like a high waist on your pants, then it is best to use old high-waisted jeans for shorts.

bustle.com

It is not recommended to use pants that are too tight, as after cutting the part that went into the shorts may be too tight. In addition, such a product can be very rubbing, especially during prolonged wear.

It is better to refuse options with ready-made scuffs and holes. These jeans are more difficult to adjust in length. On ordinary shorts, you can independently create trim and place decorative elements.

Examine your wardrobe carefully for the most spacious model. If there is none, then you can refer to the wardrobe of your young man... Boyfriend shorts are all the rage right now, so don't be afraid to create your product out of your boyfriend's old jeans.

bustle.com

If we talk about colors, jeans with non-standard shades (gray, pink or black) are preferable. These colors will make your future shorts even more original.

Making measurements

After you decide on a pair of old jeans to sew, remove all necessary measurements... If you have chosen your boyfriend's pants, then you may need to narrow the waist of the product, so in addition to the length of the future shorts, measure also the circumference of the waist and hips.

It may seem that cutting off the legs is easy and without any special markings and measurements. However, this is not the case: this method will almost certainly not work. An incorrectly cut piece will ruin the entire product. Before making the first cut, correctly measure the desired length on both legs and do not forget to add seams (usually 3-5 cm depending on the number of turns).

bustle.com

The best way to take measurements is with a tape measure and a piece of chalk. All markings must be done from the seamy side. This will ensure that any measuring lines will not spoil the appearance of the shorts and that the cut does not come out above the pockets.

bustle.com

If you are a beginner but decide not to put off creating jeans shorts, you can use a lace or charging cable to mark the length you want. Instead of chalk, regular soap is suitable: it will be visible on the fabric and it will be easily wiped off after washing.

How to create shorts from jeans

To create unique shorts you will need:

• old jeans;
• scissors;
• tape measure;
• crayon or soap;
• sewing machine;
• decor elements;
• pumice or medium-grit sandpaper to create abrasions.

bustle.com

Stage 1. We make markings and test cuts

Apply cutting lines to fabric according to measurements. It is not recommended to make too short the legs of the shorts, since directly on the figure, the shorts can be located much higher than the intended fit. Such a product will most likely look like underwear, so be careful when choosing the length.

Do not be afraid to cut out fragments. This uncertainty can affect the entire shorts formation process. To deal with it and get a better feel for the fabric, make a few training cuts on the bottom of the jeans before cutting along the intended line.

bustle.com

Stage 2. Cut off the jeans legs

If you've followed the previous tips, it shouldn't be difficult for you to properly cut off excess jeans fabric. It is recommended to first cut the material 2-3 cm below the marking line. This will leave the opportunity for additional manipulations after trying on.

Be careful when cutting the fabric around the side seams of your jeans. These are often the most difficult places to process, since the material is formed there in several layers. Take your time or tilt the scissors to avoid cutting off the excess fabric.

Be sure to try on the product after trimming. Remove excess threads and decide on the final length of the product. On yourself, you can tuck the legs and see how the shorts will fit with a shorter length.

bustle.com

If you want to get a product with asymmetrical legs, then mark additional lines on the fabric. It is also better to cut off the fabric according to these marks after trying on. Shorts look interesting, which have a higher fit on the sides and as low as possible between the legs.

bustle.com

You can leave the product as it is, without processing, simply by tucking the edges.

bustle.com

Stage 3. Processing the edges of the shorts

If you nevertheless decided to leave the doorways, then they must be properly drawn up.

1. Start by overlocking or hand-stitching to overcast the edges of the shorts. This will help prevent shedding of the threads and will also prevent the side seams from separating.
2. Then fold the fabric up to the required amount for the folds. Fold up again. You should have two layers of material.
3. Iron the folds and sew on the sides with a blind stitch (sew one centimeter on each side).

bustle.com

Stage 4. Add decorative elements and decoration

Fringed hem can be used to trim the bottom of the shorts. This requires a sewing needle or tweezers. With their help, remove the threads that are located horizontally, and then fluff the edge with a regular brush. Ideally, if the fringe length is 2-3 cm.

So that the fringe retains the set length and the fabric does not unfold further, lay a seam or two along the circumference of the legs with a machine stitch. They will secure the fringe.

Use rivets, sequins and rhinestones to decorate the shorts, and form two or three scuffs on the back or front of the garment. Holes and scuffs are best done with tweezers (pull out each vertical strand one at a time) or a pumice stone.

The negligent effect keeps on the list fashion trends for the 2nd season in a row and applies to almost everything: from makeup to clothes. In particular, ripped shorts are not out of fashion, which can fit into almost every look, from sporty to glamorous. In addition, such a wardrobe item can be made on your own in a few minutes.

How to make your own ripped shorts?

In order to make torn shorts with your own hands, in addition to the usual tools in the form of chalk and scissors, you need to find a thin and long crochet hook, which can be replaced by a gypsy needle, as well as stationery knife, toothbrush and razor.

Regardless of what material you start to make holes on the shorts, work only on the longitudinal threads. If you inadvertently switch to transverse, the product will instantly disperse and will be suitable only for home wear or disposal. That is, only longitudinal threads are removed with a sharp knife from the desired area, in which a gap should form, with a sharp knife, and the transverse net remains intact: it is convenient to do this with a long gypsy needle or crochet. And so that the process is facilitated, and unpleasant incidents do not happen, a clerical knife is taken and sharpened as well as possible. He should cut the thread straight away, not cut it.

The same effect can be achieved if you work not with a knife, but with a stationery razor. After the place of the hole is marked, you need to walk along the threads with a toothbrush, a tool for removing pills, or simply with your fingers, breaking the transverse threads left untouched. They need to be slightly divided among themselves.

If you decide that the gaps should be large, and there should be no threads left in them, the transverse ones are removed exactly to the edge of the gap, after which you need to scorch the cut point. Or, you can walk over it with an overlock, but in any case, it is imperative to fix the cut. After that, the longitudinal threads can be pulled out with a needle or crochet like a fringe.

There is also interesting way Creation of tears in shorts, which works best with denim: it implies the presence of a pumice stone or a special grater, which is used for a dry pedicure. The smaller its knives are and the higher the frequency of their location, the faster and better it will be possible to make holes. It is required with strong pressure to rub this tool on the fabric in the right place until the threads begin to thin out.

An important point, which must not be overlooked, concerns measuring instruments: measurements are taken with a measuring tape, but on the fabric the marking is often done with a ruler, which gives rise to errors. This is because the divisions on different instruments are not identical to each other. Because of this, professional cutters recommend on the fabric to also postpone the necessary values ​​with a measuring tape, which was used to measure, and use the ruler only to build a straight line, if necessary.

How to make ripped jeans shorts?

If there are no old shorts that can be used up, jeans will come to replace them. It is easiest to work with such a fabric, since it does not need additional processing of the edge, which protects it from shedding. In addition, it is on denim that various scuffs look as advantageous as possible. To do this, it is worth preparing the sharpest scissors, a piece of soap or chalk, a long ruler and a measuring tape.

First, the jeans need to be turned into simple shorts, choosing the optimal length for them. It is not worth doing this by thoughtlessly shortening the legs: when you put it on, it turns out that the thing does not sit at all as you would like. Therefore, it is advisable to find an assistant who can make the markup when the jeans are on you. If no one can help, it is easy to mark the edge by measuring the length of your shorts or skirts. But it is impossible to measure without errors on an already worn thing.

Depending on how short the shorts should be, a cut line is selected. Here it is immediately necessary to decide exactly how the bottom will look. The most attractive look are ripped shorts, in which the bottom edge has a fringe, which means that it is almost not processed in any way. But if you want to keep it flat, you need to calculate the increase that goes into the fold. The same applies to the edge deliberately bent up and out. In any case, do not forget that the length of the rear panel should be 0.7-1 cm longer than the front panel.

The edge can be finished last, or you can tackle it before creating artistic holes in the shorts. According to the classical scheme, it is folded inward twice, while maintaining the width of 0.5 cm, after which it is hemmed along the top line with small stitches. To create a cuff, the fabric bent outward must be ironed out, and only then hemmed, moreover, it is recommended to do this manually so that the seam is not visible on the front side. If you want to leave the bottom edge without processing, it is best to decorate it with a fringe, which can be created with a regular crochet, pulling the longitudinal threads one by one.

Now, on the product laid out with the front panel upwards, it is necessary to make a markup: mark the places of future holes and their scope. It is categorically not recommended to be zealous with the latter: in the sock and during washing, the gaps will diverge in breadth, and after 2-3 times artistically torn shorts will turn into a thing that can only be worn at the dacha, since solid fabric will not remain at all. In addition, stylists remind that the larger the holes, the more volume they visually add to the legs. This should be taken into account by girls who want to adjust their figure with clothes.

Torn shorts: photos and ideas for finishing

Ripped denim shorts already look stylish in themselves and rarely require any additions, but many girls lack a certain personality in such a thing, which can be added through interesting decor... In particular, lace is very popular today, which can play even with such a controversial material as denim. Such a combination of tenderness and sporty negligence has long been seen in the shows of leading designers.

Lace can serve as a lining, or it can become an independent piece of decoration. In the latter case, it acts as a cuff or fills in the missing section: for example, if a part of the fabric was cut from the side seam, lace is put in its place, neatly attached from the front side. If the material is put as a lining, most often its cut should fill the entire panel from the wrong side, because otherwise the seam will be visible from the front side, which will ruin the look of the product.

A controversial, but still actual trend on world catwalks - pockets peeking out from under the bottom edge in short ripped shorts. It is most interesting if the material of the pockets differs from that used when sewing the main product, and the holes are neatly on them. To get such a wardrobe item, the bottom edge of the shorts is cut as short as possible, and the pocket itself can even be lengthened if you make a fake patch from the wrong side, choosing a contrasting color, texture or fabric for it.

In addition, ripped shorts can be trimmed with more familiar details like rivets, beads and ribbons, as well as paint. Today, this method is in high demand: at home, a complex gradient dyeing of the fabric is performed, as well as a simpler application of streaks and drops randomly located on the fabric. Any of the options, with the proper imagination, turns simple ripped shorts into a designer thing.

Judging by the trends dictated by eminent fashion houses, ripped shorts will not lose their popularity for a long time, so be sure to try to replenish your wardrobe with them. And even if by chance it turns out that you made the gaps too large, and they began to diverge, you can always cover some area with an interesting patch, which will only add personality to your thing.

Breathe into old thing second life creative ideas how to make jeans out of jeans fashion shorts, because quite often there is a situation when excellent, but rather annoying denim trousers are lying around in the closet, which it is a pity to throw away, and there is no longer any desire to put on. In this case, you can safely turn them into a new stylish wardrobe item.

Planning phase

The shelves in stores are littered with a wide variety of clothes for every taste and style, but sometimes you want to find something like that. So why not create an exclusive piece with your own hands? Handmade is relevant and unique, such things have always been valued above factory production. Each model has its own unique flavor, which, with a skillful approach, will easily help to emphasize the dignity of the figure.

You need very little to work. If you just plan to cut off the leg, leaving a torn edge - except for threads with a needle and scissors, nothing else is needed. But the choice of the latter should be approached carefully: ordinary ones are not always able to cut thick denim, it is better to purchase large, tailor's.

To make the cut neat and the same on both legs, stock up on a centimeter ruler and chalk. If you do not plan to leave a torn edge, but to stitch the product beautifully, you will need a sewing machine here.

Advice! If you don't have chalk, it doesn't matter, you can get by with a bar of regular soap. It draws just as well on fabric and rinses off perfectly in the wash process.

The fashionable trend of the coming season is painted edges, for this you will need acrylic paints for fabric, a stencil and a special marker.

To ennoble the future masterpiece, you can buy interesting stripes, appliques, laces in sewing accessories stores.

The last but most important piece is the old jeans. What pants are right for this? If you want the future shorts to effectively fit the ass, then the trousers should also be tight. But keep in mind that stretch is an unsuitable material, due to its special elasticity, the product from it will turn out to be too frank.

Depending on the length and style, the shorts are classified as follows:

• Capri pants - slightly shorter than standard pants, trimmed at the calf. This model looks great with shoes with heels and sandals. Skinny pants are best for them.
• Bermuda shorts are an incredibly stylish, casual option for summer, reaching knee length. For such a transformation, loose-fitting jeans are suitable.
• Classic - about 10 cm above the knee. They can be made from both skinny and wide jeans. All sorts of holes and scuffs on the pockets and on the front of the thigh are welcome.
• Short - a beach version with an edge of about 5-8 cm. Wide models of pants are not suitable for their manufacture, since the hips will be unnecessarily bare. Trimming should be approached with caution, because it is very easy to miss the size.

Cutting the pants and finishing the edges

We proceed to the next stage. Here you cannot rush, cut in one fell swoop and "by eye". It is not for nothing that the people say: "Measure seven times ...", indeed, you need to measure carefully. The easiest way is to take the shorts that you like and draw the future cut line along them, adding a few centimeters to the hem:

• to bend the edge once and then go over the seam with an overlock, just add 2-3 cm;
• for a double hem, you need 3-4 cm.

Advice! If you have never done needlework before, carefully mark the places for cutting with chalk, pins or soap. Remember: it is better to cut a little more, and then shorten to the desired length, than to make it too short and permanently ruin the product.

Taking into account all the allowances for the ruler, draw a line along which the legs will be cut. On the inside seam, future shorts should be slightly longer than on the outside. With such a wedge, your creation will look more original than with a straight cut. Check if everything is even, if the length suits. Then fold the pants in half and use sharp scissors to remove the excess fabric. If you are planning to create fringed shorts, add a couple more inches for the allowance.

Advice!Girls, who said that the cut line must be absolutely straight? The curly bottom in the form of waves looks much more elegant. Once you've drawn a straight line, take something round, like a lid or a small cup, drag it along your chosen path, and trace to create a wavy edge. Once trimmed, you can fold it over and hem, or leave it unchanged.

The easiest way to cut a free edge is to fold it over and sew on sewing machine, by hand or by overlocking the hem of the leg. For more convenience, iron the line along which you plan to lay the seam, you can also basting stitches with a needle with a bright thread, which you pull out at the very end, sew only from the wrong side.

You can do without visible seams altogether. In shops for needlewomen, a special "cobweb" is sold, a tape with a sticky edge, the glue does not dissolve in water and holds no worse than the strongest thread. The edge of the leg is first processed with an overlock, then a "cobweb" is applied over the laid seam, the edge is tucked up and glued together.

A stylish fringe or frayed hem can be created in two ways:

• in the washing machine;
• manually.

In the first case, it is necessary to wash the product when a large number turns, the loose threads will loosen up, and you will get the desired result. At the end, just stitch the edges of the fabric to prevent further chafing during wear.

In the second option, you need to pull out the threads with your own hands until the desired effect is achieved, or go over the selected places with sandpaper. On the front, on the shorts, you can make slots with a blade or a clerical knife, and decorate the edges of the holes obtained in the form of a fringe.

Important!In the process of wearing, the slots will increase in size, so initially make them not very large. When creating cuts, be sure to insert a piece of plywood or thick cardboard so as not to cut through both panels.

Final stage: personalizing your creation

One of the trend directions of the coming season is gradient coloring or ombre. We can create a smooth color transition on the updated shorts, but first we need to desaturate them.

To do this, take one part of the whiteness and dilute it in two parts of clean running water. Soak the item in the resulting solution for 2 hours, then remove, rinse and dry. If the fabric is not whitened enough, repeat the process. If you do not completely dip the product, you can achieve a transition from white to a basic shade.

• when working with chlorine-containing products, be sure to use rubber gloves;
• in order to avoid inhalation of toxic fumes, carry out the procedure on the balcony, on the street or near an open window;
• the elastic type of denim contains spandex, which, when bleached, can give an ugly yellowish tint, keep this in mind, it is better not to bleach this type of jeans;
• before the procedure, carefully inspect the material, if there are outdated yellow spots- there is a high probability that they will not go anywhere;
  It is best to first discolor a small piece of pants that was left after cutting, so you will understand what result you will get;
• the line-up fragment is weakly bleached, most likely, it will remain in its original form.

When your creation is crystal white, use acrylic fabric paints. Pick related software color palette shades. Alternately apply paints on both sides of the panels, achieving a beautiful gradient, blend the transition boundaries well.

You get a creative model by sprinkling bright colors in random order. Place your creation on a horizontal surface, after covering it with newspaper or a piece of cellophane. Then dip the brush into the paint and shake it on a cloth, alternating shades. The resulting negligence will only play into the hands.

Advice!In addition to paints, you can use special permanent markers. It is much more convenient to draw with them. On sale there are markers with various "chips" - fluorescent, with a velvet effect, 3D-volumetric.

If you have stocked up with stencils, you can apply wonderful compositions with their help. Just attach the selected piece to the surface of the pant leg and apply paint with a sponge. Let it dry according to the instructions on the package.

One more interesting option forming a pattern using lace. Soak the lace element in the bleaching solution and press firmly on the shorts for 30 minutes. Under the influence of bleach, your creation will change its color in the places of contact and a beautiful ornament will form there.

Stylish and elegant decor

Lace inserts look feminine and sophisticated, making such an ornament will not be difficult. This decoration technique belongs to the category of budgetary and low-cost in time. You don't need to have a lot of handicraft experience to sew the pieces of lace to the base material.

There are many varieties of decorating denim shorts with lace inserts, among the most popular are the following:

• decor along the lower edge of the leg;
• lace in the belt area;
• stripes on the pockets;
• side inner and outer inserts.

As an example, we will show you how to decorate your work with lace on the sides.

Take a piece of cotton guipure, a needle with a fine thread of the appropriate shade. Disassemble side seams cut but not stitched shorts, cut a wedge from the main canvas. A wedge of the appropriate size must be cut from the selected decorating canvas. Then the resulting wedges should be pinned to the base panel with inside... Do not be lazy to try on in the process of creating a masterpiece, it is important to make sure that the fabric does not pull together at the bonding points. After the machinations done, carefully sew on the guipure insert with blind stitches or stitch on the typewriter.

Advice! In order not to overload the thing with excessive shades, give preference to pastel lace tones - beige, peach, white. Too bright is not always good.

If you don't want guipure inserts - no problem! An excellent alternative to them is artificial leather. It's good if it resembles natural as much as possible. Leather stripes or back pockets, a patch on the waist will help turn a mediocre model into an outstanding design masterpiece in military style.

The current trend of the coming season is a mixture of styles, try to combine brutal leather or rivets with feminine rhinestones, stones or floral applique.

You can get a glamorous look if you decorate your work with sequins. You can decorate both individual elements (cuffs, belt, pockets), and the main canvas. Decide in advance how the sequins will be located on the shorts and start sewing. This process is not fast, it requires care and perseverance. But the result obtained can exceed all expectations. By the way, there are both single and rolled sequins, the latter are chosen if you need to decorate a large area of ​​the canvas.

Handmade always appreciated, show creativity, put your soul into the creation process and worn, pretty boring jeans will play bright colors in a new way.

Old jeans are regularly thrown away by many, although they can easily provide the product new life... To create shorts from old jeans, choose a model that fits the wearer as comfortably and aesthetically as possible. If there are puffs or holes, this is not a reason to part with the thing, since in the process of work, all imperfections can not only be masked, but also turned into advantages.

Prepare the necessary materials:

1. Scissors or blade with handle.
2. Needles, preferably of different thickness (you can get by with one).
3. Threads to match jeans, if you do not plan to completely repaint them.
4. Sewing machine.
5. Chalk or any other pigment that can be used to easily outline and, if necessary, rinse off without leaving a trace.

Before trimming jeans to shorts, you must determine and carefully measure suitable length... The parameters depend not only on the preferences of the owner, but also on the presence of obvious defects below a certain level, on the features of the pattern. To determine the optimal length, it is recommended to try on jeans. When the exact length of the shorts is determined, you should leave a few more centimeters at the edges in order to overcast.

Sometimes people shape double hemming at the ends of the resulting shorts to ensure durability and a store-like look. In this case, 4-5 additional centimeters will be required. Mark the edge with chalk or light colored soap. If you decide to create very short shorts, lengthen the back and shorten the front as much as possible.

When the fitting is over and the necessary marks have been applied, you should check the correctness of their level by folding the jeans and checking the indicators along the edges. When the exact parameters are determined, draw a straight line between the marks. This is necessary in order to focus not on the symmetry of the strip, but on the evenness of the edges of future shorts when cutting off the excess. Trim your pants along the marked hem.

To ensure a straight cut, you need to use very sharp scissors or sharpen them first.

When the piece of fabric is already completely separated, it should not be immediately put aside. It will be needed to control the cut on the second leg. So with careful work, you can guarantee the exact level of the cut, even if the owner of the thing cannot draw 2 absolutely identical lines by eye.

Create, check if necessary and correct the mark again. Trim off excess fabric as in the first leg.

If you are new to fabric cutting or are new to denim, especially when reworking fairly thick pants, take some precautions. Cut the fabric just down to the knee to practice. Constantly bend, straighten the fabric and check with the necessary parameters, carrying out regular fitting. Finally, cut the fabric to the desired length.

Edge processing

There are several ways to style the hem of jeans. You can create a ragged edge, if necessary, just gently fold it over, making an edge. You can use the easiest methods or get creative.

Fringe at the ends

It is the lightest, but aesthetic and stylish option... Trim the free edge of the shorts you've learned. To do this, separate several lines from the canvas in a horizontal direction. Use tweezers or a needle to make this easier.

The length of the fringe depends on the discretion of the owners of the shorts, but it is not recommended to make it wider than 2.5-3 cm. When all interfering threads have been removed, make the fringe as fluffy as possible with a brush, but do not deform it.

Ornament for edge trim

This is a complicated but unusual option. First, prepare the template by applying the desired (preferably light) pattern on a thick paper. Lean the stencil against the edges of the legs, while adjusting its position to the intended length. Use soap to outline the edges. Use a pen if necessary, but be sure to draw on the wrong side.

Cut the edge exactly according to the pre-patterned pattern.

Fold in the edges and sew on the sewing machine. If the chosen denim quite dense and high-quality, it is not necessary to fold it.

Torn edges

This is the most fashionable and popular option, so if you have enough time, you can choose it in order to be guaranteed not to be mistaken.

You don't have to put in too much effort. When you do the initial trimming of the edge, chances are it will already be uneven. It is enough just to modify its structure. Take a blade, if not available, a regular stationery knife will do. Create several horizontal cuts, rising slightly from the edge of the shorts.

Make the cuts more disheveled. You can try to shape them with your hands, but it is advisable to use sandpaper for this. Use it carefully to avoid ruining the one-piece denim.

This is how denim shorts become visually worn.

Diy-dye: staining denim shorts

Diy-dai can be translated into Russian as dye or dip. If the order of work is carried out correctly, jeans will become not only very fashionable, but also beautiful, while the dyeing technology is very simple. Everyone can exercise to perform at home.

1 method (using bleach)

Take bleach or Domestos. The use of gloves should not be neglected. It is advisable to wear long enough clothing and cover the table or other surface on which the work will be done with a waterproof tablecloth.

Follow the step-by-step scheme:

1. Dissolve 1 part water into 4 parts bleach. If you decide to use Domestos, dilute it one to one with water. For shorts that are long enough, the solution should be made more concentrated.
2. Place the parts of the shorts that need to be lightened into the finished mixture.
3. Wait half an hour or more before dyeing the shorts. It is advisable to sometimes take them out to check the lightening effect, so that when the desired result is achieved, immediately remove the fabric from the solution. You can do it differently: first, completely wet the shorts in water, and apply Domestos on those areas that should be lighter.
4. When the necessary areas of the thing have completely gone through the bleaching process, it must be rinsed with water and vinegar 2 times. Then wash your shorts.

Method 2 (staining)

If you are going to dye shorts that are dark enough, then you should not choose light shades. The exceptions are cases in which professional dyes are used. Then you can work with any color. You can use different tones, but it is advisable to refrain from brown and dark, as these are dark enough colors for the summer season. If you decide to dye your shorts in lighter shades, first use bleach, and then proceed with the lighter tones.

You can use any dye to paint the shorts. Usually it is dissolved in water in the proportion indicated on the package. The richer the concentration of the solution is, the more intense is its coloring power. You should not immediately overdo it with the consistency, since a too light shade can be made both brighter and darker, and to eliminate the saturated dye, you will have to whiten the thing.

Follow this procedure:

1. Place the jeans in soda ash, following the dosage indicated on the pack. With this solution, you can guarantee the preservation of the paint, as well as reduce the intensity of discoloration of things during the washing process.
2. The shorts are soaked for at least 20 minutes, then removed and wrung out. When this action is carried out, you should place the item on a horizontal clean surface, leveling it as best as possible.
3. If you purchased liquid colorant, you simply need to pour it into a suitable container. Powdered colorant requires an initial dilution and then poured into a bottle with a stopper to ensure proper dosing of the agent.
4. If no special containers are available, use packaging for shampoos, conditioners and similar products for colorants. Make sure you can control the quantity and quality of the paint you pour.

Video - How to make ripped, studded, ombre denim shorts

Paint with a specific pattern or in a chaotic manner. Work one side first, then turn the fabric over. If you need to change the color intensity, you can dilute the paint with water or, on the contrary, rub it strongly into the fabric. When you plan to apply a solid color pattern, it is not necessary to pour the dye into the dispenser. You can put the product in a basin, soak the shorts in it, soak them until the optimal color is obtained. At the end of the procedure, leave the shorts on the plastic wrap for at least 6 hours.

Denim is so widespread today that denim can be seen everywhere. This material differs from others in its strength and durability. That is why it happens that jeans have already gotten tired of order, but it’s a pity to throw them away, because the fabric is like new. In this case, you can turn them into a new original wardrobe item - stylish shorts.

Choosing jeans for making shorts

How to make ripped shorts out of old jeans? It would seem that it is only necessary to cut off the required number of centimeters to reduce the length of the legs. But it’s not that simple. Not all shorts will fit well after the legs are cut off. Before you cut, you need to look at the style of the jeans. It is impossible to change the cut, so if it is not suitable, then it is better to abandon the process of rebirth. Jeans that are skinny and tight will not work. You also need to avoid models that are narrow to the knee, and below go for expansion. Shorts made from tapered jeans look bad. But trousers with straight legs along the entire length are ideal for turning into ripped shorts at home. Moreover, regardless of the final length.

How to trim correctly?

First you need to decide which model of shorts should be the result of the transformation. Cutting the legs very short will create beach shorts. And to get a new thing for every day, you need to leave the length of the legs a little higher than the knee.

To facilitate the process, you first need to cut the trousers to the knee, and then arm yourself with a measuring tape and measure the required length. It is recommended to cut 15 centimeters above the knee. And if you want to have short torn shorts, you can remove 20 centimeters or more.

After determining the desired length, add two centimeters to trim the hem of the shorts. If a double tucked hem is supposed, then you need to add four centimeters on each leg. If you want to have very short shorts, the back should be slightly longer than the front. Next, you need to draw marks with chalk, remove the jeans and start shortening the trousers.

The marks applied must be connected with straight lines, along which excess material will be removed. Very sharp scissors are recommended.

The cut piece must be attached to the second leg to ensure the same leg length on the new product. Mark with chalk and use scissors to scrape off excess fabric.

Processing the bottom of the shorts

The easiest way to process the bottom of the shorts is to use an overlock. It is also possible to zigzag the hem on the sewing machine by tucking the fabric about 0.5 centimeters. You can also fold the hem of the legs in two layers and iron it out.

In order to get stylish and original thing, it is better not to make the bottom neat. There are two options for the raw edge of denim shorts:

• fringe;
• torn edge.

Fringed edge

This option is not at all difficult to execute. Need to arm sewing needle or with tweezers and remove several horizontal threads from the bottom of the shorts. The more they are separated, the longer the fringe will be. It is not recommended to make the fringe length more than three centimeters. After all the excess threads have been removed, you need to fluff up the fringe using toothbrush... The finished edge can be folded up.

How to make torn edges?

Today this is the most stylish option for the design of the bottom of denim shorts. You don't have to work hard to achieve the result. After all, after trimming with scissors, the edge is already torn. It needs to be finalized.

How to make ripped jeans shorts? To do this, you need a blade or a clerical knife. It is necessary to make 3-4 horizontal cuts. Rub them well by hand or with sandpaper. This creates a worn-out denim effect.

Bleaching denim shorts

After the jeans have been trimmed and finished, it's time to make the new garment unique by giving it a different color. For example, you can whiten the whole shorts, but there is the option of giving a two-tone dyeing. In this case, the top of the product will remain in its original color, and the bottom will be bleached.

You can buy bleach from a sewing supply store.

For two-tone dyeing, you need to hang the item on a hanger and dip it into a container with bleach 1/3 of its length. Hold for three minutes. Then leave the shorts to dry for one hour. Then rinse in clean water and leave to dry. After the moisture has completely evaporated, the whitening will become much more noticeable.

To completely bleach or lighten your denim shorts, soak them in the bleaching solution for 2 hours. The procedure will have to be performed several times to achieve the desired shade.

Another option for creating an original appearance shorts is to spray the whitening product in a random sequence and leave for the time indicated in the instructions for the product. As a result, you will get a thing with a unique two-color pattern.

After completing the staining procedure, the shorts should be washed as usual.

• When handling the bleach, rubber gloves should be worn to protect the skin of the hands.
• Whitening work should be done outdoors or on a balcony to avoid inhalation of toxic fumes.
• Stretch jeans contain spandex, which can give an unpleasant yellow tint when bleached. Therefore, it is better not to discolor such denim.
• Before starting the bleaching work, you need to carefully examine the fabric. If light spots have a yellowish tint, there is a chance that this yellowness in end result will not go away.
• It is recommended that you first discolor the test piece that was left after cutting the jeans in order to evaluate the result.
• Ideally White color can only be achieved by using special fabric dye.
• The stitching is not affected by the bleach agent and in most cases remains in its original color.

Creating colored shorts

For those who prefer bright colors, this color option will appeal to their liking. Fabric dyes are sold at sewing supply stores. These dyes are highly water soluble and can be easily applied to fabric with a brush. Dyeing the shorts in bright color is a bold decision. They must be bleached before dyeing. For complete discoloration, you need to leave the item in bleach for several hours. Then rinse it well, dry it and evaluate the result. Repeat the procedure if necessary.

After discoloration, the shorts are made of ripped jeans ready to design. Now you can show your imagination and decide whether to apply a color stencil drawing. Or the shorts are supposed to be dyed in a certain shade, completely dipping them in a dyeing solution. For full staining, 20 minutes is enough, after the thing you need to rinse and dry well.

Denim shorts dyed using the ombre effect look spectacular, when similar shades smoothly blend into each other. In this case, it is recommended to use no more than three colors.

Jewelry options

To add originality to the shorts, you can make an applique on them. It can be flowers, baby or nautical pictures on the back pocket. You can also place small images of the same theme on the bottom edge of the shorts.

Sequins, rhinestones and rivets add brightness to the outfit. You can sew single sequins by hand, and ribbons of them - using sewing machine... Rhinestones can be glued along the seams on the sides, in several rows on the pockets or on the belt.

Another decoration option is lace.

Shorts with lace

This delicate piece of jewelry looks very stylish in tandem with rough denim.

In order to decorate the product, you need to cut out triangles on the sides of the shorts, cover these cutouts with lace of the appropriate shape and sew with a needle and thread.

You can also trim pockets with this decoration.

The lace sewn on the bottom of the shorts looks original. To do this, you need to sew on the inner bottom edge of the selected tape so that it looks out about one and a half centimeters.

You can turn old, boring jeans into fashionable ripped shorts with your own hands. For this you only need imagination. You will only have to use the materials at hand. When choosing shorts in a store, it is not always possible to find an option that fits perfectly in shape, length and color. When making this thing with your own hands, you can take into account all the nuances and make your dream come true. The skills of a professional seamstress are completely unnecessary in this process. With just a little effort, you can replenish your wardrobe with stylish new shorts.