Christmas toys from plastic bottles - a lot of ideas! How to make a pig with your own hands: step-by-step master classes with a photo Volumetric yellow pig made of corrugated paper - a master class with a diagram and instructions.

The symbolism of the upcoming 2019 is the yellow pig. In this article, we will look at a few simple step-by-step DIY pig making master classes.

We will show in detail how you can independently make from materials that can be easily found in every home, such do-it-yourself crafts for a year of a pig, like a piggy bank, we blind piglets from dough, we will do simple crafts for kindergarten, we will learn how to sew a pig from nurseries tights and socks, we will make a pig-ball out of threads, we will make a coffee toy, and we will also learn how to sew a pig-tilde from fabric. And at the end of the article, a video bonus will be waiting for you: making a pig from pompons as a gift for the new year. So, if you're ready, let's get started!

To make a funny papier-mâché piggy bank, we will use toilet paper or newspapers, acrylic putty, acrylic paints, PVA glue, a balloon, foil, a foil reel.


The first step is to inflate the balloon. Then, in several layers, we apply prepared scraps of newspaper dipped in PVA glue and water onto the inflated balloon so that our piggy bank is not soft, but strong enough and let it dry.


In a plastic bucket, we will prepare a mass for papier-mâché: you need to tear toilet paper or napkins into small pieces and add PVA glue. Mix everything well! We coat the future pig with the obtained "chewed paper".


When the papier-mâché frame dries well, the ball must be carefully burst and pulled out. Now we need to close the hole through which we pulled the ball: for this we glue it crosswise with masking tape and apply papier-mâché, leaving a small rectangular hole - this will be the slot where the money is thrown.

Divide the foil reel into four equal parts - it will serve as legs for our pig. We glue the legs to the pig with masking tape. Then we apply papier-mâché. The inside of the legs must be filled with something heavy - so our pig will become more resilient. Sand or a small metal object, such as a nut or screws, will do.


We make a patch of foil for the pig, under which you need to form a mouth (upper and lower lip).


Now we need to sculpt eyes and ears for our pig - they can be made either from the remains of papier-mâché or molded from clay.


The flexible wire will serve as a tail for the pig: we twist it, covering the tail with the remnants of papier-mâché. After our pig is completely dry, it must be properly treated several times with acrylic putty and then wiped with a cloth soaked in water - this is how the pig's barrel will be leveled.


Our piggy is ready for painting!


First you need to apply dark paint, several different shades can be used. Then red paint is applied to the craft with a sponge.


Then - pink, and as the final stage - pink and white paints are applied. The last step is to apply white paint to the protruding surfaces. Our piggy bank is ready!



We offer you another version of the piggy bank, step-by-step execution which you can watch in the video:

Salted dough suspension pigs

As a wonderful souvenir gift at home, you can also make a piglet pendant from materials that can be found in every home - flour and salt. It is very easy to make such a pig, it turns out to be very cool and is suitable as a talisman that any child will be happy with, or as a craft in the kindergarten. Below is a step-by-step guide on how to make such a souvenir.

DIY simple crafts for kindergarten

As a product that can be easily made, a paper craft, a suit for children's matinee- a mask and ears of a pig, as well as a pig in a pen. Let's consider step by step how easy it is to do such crafts yourself.

Paper craft

To make such a toy paper souvenir, we need: a black pencil and marker, a ruler, colored paper - pink or red, as well as silver, a stapler and glue, plastic eyes prepared in advance, a ribbon for decoration.


The body of our pig should be voluminous; for this we need colored paper - pink or red. We cut out an even rectangle from paper, connect the edges with glue or a stapler so that we get the base-body for our craft - a high and wide tube.


Next, we make the basis for the pig's face: we take paper of two different colors, from one we cut out a larger circle - the head of our pig, and two small triangles-ears, from the second - a smaller oval-patch. Eyes for pigs can be taken prepared in advance - plastic, or you can cut them yourself out of other colored paper.


Now you need to connect all the parts we cut out: bend and glue the ears and the patch to the head in series. On the patch we draw the nostrils, under it - a smiling mouth. Draw cilia on the eyes.


Now you need to cut out the rest of the details from the multi-colored paper - for the belly of the pig, take a silver color, and red for the front legs and tail. We glue the prepared parts: we glue the long legs on the sides of the pig's body, the tail to the back of the craft, and the tummy to the front.


We tie a thin ribbon around the pig's neck and tie an elegant bow. Our pig is ready!


The finished paper craft-pig can be presented as a New Year's present, and it will also look good on a decorated Christmas tree as a toy.

You can also make such a craft out of cardboard:


Suit: mask and pig ears

It is very easy to prepare such a costume for a children's matinee on your own, since it does not require sewing and its production will take only a few minutes.


For a costume consisting of a patch, ears and a pig's tail, we need:

  • felt or fleece pink and white,
  • scissors,
  • glue,
  • stapler,
  • paper cup,
  • pink elastic band,
  • thin elastic band,
  • white thin plastic hair hoop.

First we make a ponytail: Cut off a piece of felt fabric - it should be slightly longer and wider than a piece of wire. We put the wire inside a piece of fabric cut off rectangularly, wrap it up and glue the fabric well.


Then we take an elastic band, fold it like a belt, attach the tail we have prepared in the middle and fasten it with a stapler or glue. We twist the tail like a pig. One piece of the costume is ready!


Now we start making a patch... To do this, take a small-diameter cardboard cup, apply a piece of pink felt to it, circle and cut out the resulting circle - this will be our patch. Cut off the top from the glass so that the height of the glass is one and a half to two centimeters.


Cut off a rectangular strip of the same width from the felt so that you can wrap our glass. Now we glue our cut out parts to the glass: a circle to the bottom, a rectangular strip along the entire glass. It turns out to be a pretty pink patch!

Cut out two small oval details from white felt - nostrils. We glue on the patch exactly in the middle.


We make two small holes on the sides of the cup, into which we insert a thin elastic band. We tie an elastic band on each side to a large knot inside the cup-patch. We try on our nose on our head, it should hold tight enough - so that it does not fall off, but also does not press hard. Our nose for a pig costume is ready!

Getting started making ears... To do this, we need to cut off two large pieces in the shape of pig ears from the pink felt. Then we take our headband, pin our eyelet, pinch it and wrap it around the hoop, secure it well with glue.



Our costume for the holiday is ready!

Pig in the pen


To make such a textile craft, we need:

  • empty plastic bottle with a volume of 0.5 liters,
  • plastic eyes,
  • 4 plastic covers,
  • a piece of light felt or felt material,
  • a small piece of flexible wire,
  • a piece of padding polyester,
  • nylon white stocking,
  • multi-colored paper,
  • a few wooden skewers
  • a roll of twine,
  • shoe cardboard box cover,
  • gouache in red and white,
  • colorless varnish,
  • hot glue,
  • a few pebbles, acorns and twigs.

First, let's prepare a pen for the pig: turn the box upside down, glue the required number of wooden skewers around the entire perimeter.

We glue the box on the inside with green paper, weave a fence from the twine around the glued skewers. We put acorns and pebbles in the pen, put a plastic jar - a feeder for our pig, arrange twigs-trees. Our paddock is ready!


Now we are making a pig from a plastic bottle: we cut the bottle into several parts - the bottom, the middle and the neck. We connect the neck to the bottom, glue it with hot glue.


Using scissors, carefully cut out the mouth under the bottleneck. We wrap the bottle with a padding polyester, and also make a hole-mouth with the help of scissors.


We tighten the body of our workpiece with a tighter stocking, cut out a hole-mouth and fix it with hot glue.


Our stocking knot on the neck of the bottle must be closed with a snout: for this we cut out a circle from white cardboard, tighten it with nylon, tighten it with a thread - our snout is ready.


On the bottom of the bottle, the knot must also be closed with a wire tail, which we pre-tighten in the area of ​​the bottom with nylon.


Cut out the pig's ears from light felt, glue it to the head.


We prepare the legs: we take plastic corks, wrap them with padding polyester and nylon, tighten them with a thread, fix and glue them to the pig's body with glue.


Preparing the gouache: mix the red and white colors so that it turns out pink. Paint over our pig evenly. Apply a colorless varnish on top. After the craft is dry, glue the eyes and nostrils to the pig. Our piggy corral craft is ready!


We sew a pig from children's tights

Making such a souvenir will not take long; this will require a synthetic winterizer, children's tights or socks and a little imagination. The piggy craft is easy to complete by following the step-by-step instructions below. Ready? Then let's get started!

Socks also make good piglets:


Pig ball made of thread


For the manufacture of such original crafts we need the following materials:

  • pink threads / yarn,
  • colored paper,
  • scissors,
  • an inflatable ball of a round or oval shape,
  • PVA glue,
  • a plastic cup,
  • needle.

First, we need to prepare the base-body of the pig: for this we take a ball, inflate it to the size we need. Now we pierce the plastic cup with a needle: the resulting holes should go near the very bottom of our cup. We will pour PVA glue into it, and we will pull the thread through the holes so that it passes through the glue poured into the glass.


We wrap our inflated ball in a chaotic manner with a thread dipped in glue, so that we get as many weaves as possible. The larger the layer of wound threads, the stronger the craft will be. You can stop glueing the ball when it almost disappears under a layer of thread.

It must be remembered that the glue dries for a long time, about a day, so such a craft must be prepared before the holiday in advance.

After the glue is completely dry, you need to pierce the ball with a needle and carefully remove it from the craft.

Pig legs are made in the same way: a sausage ball is inflated, wrapped with threads, then after the glue dries, the ball must be carefully burst and removed from the legs.


Now you need to glue the legs to the body; while the glue dries up, we can start making the pig's face. To do this, on colored paper, we first need to draw all the necessary details - a patch, eyes and ears, then cut them out and glue them on the pig's body.


Then you need to stretch a long thread and secure it with a loop knot - it will come in handy if we want to hang our craft on the Christmas tree.

Coffee toy

A New Year's souvenir-pig in the form of a coffee toy is just as easy to make, its scheme is quite simple, while it will have an exquisite aroma of coffee, vanilla or cinnamon and will give its new owner only positive emotions... Let's start creating a coffee toy!

The technique for making such a souvenir is quite simple, and for making naf-naf we will need: light coarse calico, light threads, stuffing material - synthetic winterizer or foam rubber, vanillin or vanilla sugar, cocoa, instant coffee, cinnamon, scissors, PVA glue, a needle, old Toothbrush, gel pen, small container for diluting the fragrance, brushes, acrylic paints.

First, you need to prepare and cut out a template - you can attach tracing paper or loose paper to the monitor screen and circle the outline of the toy with the photo.

The toy can also be cut out in any size, for this it is enough to click on the picture, and its size will increase. It is also advisable to transfer the cut out pattern to thin cardboard - it is more practical and convenient.

Now our pen will come in handy - we will outline the resulting pattern with it; you need to do this on a fabric that is folded in half; if you plan to sew more than one toy, then it is necessary to leave on the fabric between the patterns a space for the seam allowance of about 0.5 cm, while the seam itself is better done not along the drawn line itself, but next to it: the trace from the handle will not be noticeable if the fabric gets wet.


It is necessary to simultaneously sew two layers of fabric along the line; the seam begins and ends between the hind limbs of our craft, while about 2 centimeters remains unstitched - this hole is necessary so that it is more convenient to fill the pig. Also, you cannot cut the threads of the seam so that it does not come apart when we turn and stuff our pig.


We also cut triangular teeth at the place of the seam allowances, leaving the distance to the seam itself also about 0.2 cm - this will allow the seam on the toy to remain smooth, not to bulge in different directions.


Now we turn it out and stuff the stitched pig; for particularly tight spaces, the ends of folded scissors are suitable. We fill the toy with padding polyester using unsewn holes: the more padding polyester inside, the more "plump", "pot-bellied" our pig will be. It is necessary to carefully sew up the holes through which we stuffed our pig and thread it - this will help to easily hang our pig to dry.


Now we will prepare a flavoring agent for our craft: dilute 40 ml of boiling water in a prepared container and add a teaspoon of coffee. Then the remaining ingredients - vanilla, cinnamon, cocoa - add about a quarter teaspoon to the resulting mixture.

Stir everything thoroughly and cool. Then it is necessary to add about half a teaspoon of PVA glue to the mixture, mix thoroughly.

Apply the resulting composition with a toothbrush to our pig in such a way that the fabric is dyed and not completely saturated.


Now we need to dry our toy; to do this, we hang it on a wire rack in the oven, turned on on low heat, for a quarter of an hour.
If, after the end of drying, damp spots still remain on the toy, you must turn off the oven and thus dry our workpiece.

Once completely dry, the fabric soaked in the glue coffee solution will become tough and can be easily applied to any fun pattern.

We start painting - first with a simple pencil to outline the details, and then with the help of acrylic paints. After the paints are dry, you can attach a loop or magnet to the coffee toy - then you can hang it on christmas tree or on the refrigerator.


It is advisable to avoid getting moisture on the toy. Our wonderful do-it-yourself coffee pig is ready!



We sew a tilde pig


In order to make such a wonderful souvenir, we need a printout of a pattern, cut out and translated into the selected material. Natural plain light fabric, such as linen, cotton, coarse calico, poplin, is best suited as a material for such a toy. You can take materials from old clothes or a new piece of fabric.

The pattern itself consists of several parts - the little body of the pig, ears and legs.

The fabric must be folded in half, place patterns on top of the pattern and circle; do not forget to leave 0.5 cm for the seams. Now we cut out the resulting parts and sew them as shown in microns.


Be sure to leave holes for filling the craft with stuffing and in order to sew on a pig's tail. Next, we need to sew the resulting parts and turn them out. We fill the craft with filler, for example, synthetic winterizer, holofiber, synthetic fluff; You can also put a sachet in your pig.

It is necessary to sew the legs and ears to the body of the pig with the help of a secret seam. We design the muzzle: you can glue the eyes with plastic ones, sew on beads, embroider with threads or paint with paints, nostrils - draw or embroider with floss threads; you can draw a blush on the pig's cheeks, so it will become more elegant.


In order to make the last part of our pig doll - a playful tail - we need to cut out a rectangular piece of fabric that is suitable in size and sew a piece of flexible wire into it.












Bonus Video: Pom Pom Pig

This video presents a master class that reveals step by step the process of making a pig from homemade pom-poms.

All the step-by-step instructions for making homemade toy souvenirs of a pig - a symbol of the upcoming 2019 year - presented in the article are very simple, they require simple materials that can be found in every home. With a little patience, skill, and care, you can craft any of these toys yourself.

Find out how easy it is to craft a rooster from bottles, coffee beans, fabric. See how to make a rooster out of salted dough from egg trays.

Craft a rooster from egg trays


This is what a rooster can be made of. It is completely waste material, but wonderful crafts are made from it. For work you will need:
  • egg trays;
  • acrylic paints;
  • thin white paper;
  • cardboard;
  • newspapers;
  • scissors;
  • glue gun;
  • brushes;
  • pencil.
From the protruding parts of the tray, cut blanks that are similar in shape to elongated petals. When you make a rooster's head, you need to glue them together with thin white paper to create a semblance of a flower. Cut the beard of the bird from the side of the box. The rounded triangle will become its beak, this blank needs to be glued on the side. For the beak, you will need 2 such parts.

Using a glue gun, cut out the bird's wings from cardboard, glue them with blanks from egg trays that look like leaves.


Most of your time will be spent waiting for the papier-mâché rooster's body to dry. Therefore, it is better to start working with its formation. Cut the newspapers into strips, dilute the glue with water in a 1: 2 ratio in a container. Dip the paper in here, stick it on the inflated balloon... It will take more than one hour to dry this part. When this happens, pierce the ball with a sharp object and remove it through the small hole left.

This rounded workpiece must be cut into two unequal parts, insert the smaller one into the larger one to increase the strength of the part. Glue these elements together with a glue gun.

While the papier-mâché was drying, you had enough time to form the head and neck of the rooster. To the part, which looks like a flower with elongated petals, made using petals from an egg tray, glue two triangular beak blanks, a comb cut out of cardboard.

Insert the second one into this flower blank, then the third, fourth and fifth. The head and neck of the bird are ready. Glue this piece to the side of the half papier-mâché ball. To do this, use a glue gun to attach a strip of cardboard inside the neck so that it looks out from below. We glue this label to the half of the papier-mâché body.


To make a tail, draw semicircular lines on the lid from under the eggs, cut along them.


Glue the tail to the back of the body. Everything, you can paint the cockerel with acrylic paints, when it dries up, hand the craft to the addressee or put it in the most prominent place in your house, as a bright attribute of the holiday.

You can make a rooster with your own hands not only for the New Year, but also for Easter. Then you put painted eggs in his semicircular body, thus decorate the festive table.

Symbol of 2017 made from plastic bottles

If you decide to celebrate the New Year at the dacha, then make a rooster - a symbol of 2017, which is not afraid of either snow or water. Plastic bottles are perfect for this.


To make a rooster with your own hands for the Year of the Rooster, prepare everything necessary materials, in particular
  • a five-liter canister;
  • a plastic bottle with a volume of 5 liters;
  • metal-plastic tube;
  • 2 plastic bottles with a volume of 1.5 liters;
  • corrugated pipe;
  • thick copper wire;
  • plastic bottles for feathers;
  • perforated tape;
  • acrylic putty;
  • fine mesh;
  • sandpaper;
  • awl;
  • construction foam;
  • stationery knife;
  • glue gun;
  • self-tapping screws;
  • scissors;
  • screwdriver.
Right now, you will learn how to make a cock from bottles, step by step instructions will help with this. Make just such a structure using self-tapping screws, scissors.


Bend the reinforced plastic pipe to make two rooster legs out of it. Attach them to the five-liter canister using self-tapping screws. To make an animal's neck, cut off a large piece of cloth from a 5-liter bottle, roll it up in the form of an envelope, and secure with self-tapping screws. From 1.5 liter bottles, cut off their tops below the shoulders, obliquely. Put them on the top of the bird's legs, and also attach these parts with self-tapping screws or a glue gun.

To make bird feathers, cut off the neck of the bottle. Using scissors, cut out 5 longitudinal feathers.


Put corrugated tubes on the rooster's legs, begin to decorate the thickened parts with feathers. To fix them, make two holes in each with an awl, insert a piece of wire here that needs to be tied to the base.


Cover the body of the bird with feathers, starting from the point where the tail grows. We are not making the backrest yet.


Roll the wire so that you get two paws, each with three fingers, put on these blanks pieces of corrugated pipes.


Cut out long and narrow nails from the bottom of the bottle. Attach them to the glue gun or to the "Moment of Installation".


Cover the resulting blank with spray paint, using one color for the torso and a different color for the legs.


Cut the head of the cock out of the building foam using a utility knife.


Take sandpaper, sand this part with it, then apply acrylic putty.


When this coating is dry, smooth the surface again with sandpaper, then coat with PVA.

To paint well on the head of the cockerel, use a trick, having previously covered it with PVA. In this case, the paint adheres well, and its layer will be more durable.



From a fine-mesh mesh, cut out a part that will become the wings of the back and tail of a rooster, glue long blanks from a plastic bottle to it to decorate this part with feathers. At the top, the wings are made from corrugated bottles.


Paint the wings, when the solution is dry, attach this torso piece with perforated tape and self-tapping screws. Cut from 2.5 and 2 liter bottles of elongated feathers, cutting each container into 5 pieces. Paint them on both sides, after drying, attach with wire to a metal mesh.


To make it easier to paint plastic bottles in a light color, take transparent ones, cut feathers from them for the back. Attach them with wire, 4 pieces at once for self-tapping screws.


Attach the bird's head to its place using long self-tapping screws, cover the already painted parts with plastic, paint the rest. Make spurs for the rooster out of the wire, after which you can put it in its intended place in the country or at home.


It's even easier to make the next bird out of plastic bottles.


To do this, you will need:
  • two plastic bottles with a volume of 2–2.5 liters with small necks, and one of the same volume, but with a large one;
  • disposable plastic cups in two colors;
  • disposable plates;
  • wrapping paper or trash bag;
  • plastic ball;
  • eyes for dolls;
  • Scotch;
  • stationery knife;
  • glue;
  • scissors.
Cut the first plastic bottle with a short neck below the shoulders, process the second and third as well. Attach the other two to the first, so that on one side you get a blank for the tail, and on the other for the body and throat, connect the parts with tape.


Have plastic cups cut the top into strips 8-10 mm wide. In length, they will occupy a third of the height of the glass. Put these blanks on the high neck of the bottle, alternating in color. Cut the bottom of the last glass. Shred this container not only from one side, but also from the other side into thin strips. At the same time, the middle will remain solid.

Just below the rim of the plates, cut the semicircular feathers out of the plastic plates and cut them on one side with scissors to create thin feathers. In the bottle, which is located on the opposite side of the neck, make an incision, insert the tail feathers here, secure with tape.


Attach the ball to the top cup, secure it with tape. Cover the tail cut wrapping paper or a fan cut from a colored trash bag. Cut the wings out of plastic plates, glue them to the sides of the bird with tape.


Cut the comb, beard, beak of the cock out of plastic plates. Make three cuts in the foam ball, insert these blanks here, glue them for greater strength of the connection. Take ready-made eyes for toys, or make them yourself from a white foam plate, cut out the pupils from a black garbage bag. Glue the eyes.


If you want to learn how to make a rooster out of bottles even faster, then watch the third master class in this section.

  1. Cut the bottom of a large plastic bottle, put it on a fence peg or a stick specially dug into the ground for this occasion.
  2. If the bird will stand in the house, then glue its lower part with strips of colored paper, make the wings and comb out of cardboard of the appropriate shades. If the rooster is on the street, then these parts must be waterproof.
  3. Create stripes from colorful trash bags (by tying or gluing those), wings, nose, comb, colored plastic goatee.
  4. Take two white bottle caps, paint the pupils here with black acrylic paint, glue them to the head.
  5. The tail is made from bottles different sizes and colors. Cut off their bottoms, chop them almost to the shoulders into thin strips with scissors. Insert one bottle into another, fix them with wire, tape or glue.

Salted dough rooster

Such a three-dimensional picture looks great, but it is performed in an unusual way.


To make such a panel, take:
  • 120 ml of water;
  • 180 g fine salt;
  • 370 g flour;
  • 1.5 tbsp. l. vegetable oil;
  • acrylic paints;
  • rooster pattern.

  1. You will make a cardboard image of this bird when you transfer the presented drawing to paper.
  2. Mix flour and salt, pour vegetable oil and water here. Knead the dough well, cover it with a cloth to stand for 20 minutes.
  3. Now you can roll it into a layer, put a template on top, cut a rooster out of salted dough along it. Using the same knife, apply streaks of feathers on the tail, wings, neck to the workpiece.
  4. If you want the bird to be voluminous, then separately sculpt the wings, buttons, the upper part of the comb.
  5. Leave this creative result to dry the dough. To do this, you need to place the product in a well-ventilated area to give the workpiece greater strength. Dry it for a day in this way, then heat the oven to 50 degrees.
  6. Using two cooking spatulas, transfer it to a baking sheet lined with paper and sprinkled with flour. Reduce heat to low, dry at this temperature for 2 hours. Take out the product, cool it down.
  7. Now we need to paint our fiery rooster with acrylics of different colors, and then varnish.

If you have a colorless nail polish, it works great for coloring a rooster with salt dough.


You can also sculpt a voluminous rooster from salted dough. Then the figurine needs to dry well for two days.

Crafts roosters from coffee beans do it yourself


This is not a simple rooster, but a magnet. To do it, you need to stock up on:
  • a piece of burlap;
  • a piece of red felt;
  • coffee beans;
  • a sheet of cardboard;
  • rhinestones and sequins;
  • crochet;
  • threads;
  • glue gun.
Draw on cardboard the image of the future hero, which was a more realistic craft rooster symbol of 2017. With your own hands you will need to cut out the outlines of this character. It is also necessary to cut a semicircular wing from burlap and a comb with a felt beard.

Use a brown pencil to paint the cardboard body of the cockerel. At the bottom, using a needle, in which the thread is set to match, form two legs of the cock out of it, make the paws out of cardboard, painted in Brown color, as well as the blank of the tail, which must be glued into place.

Make a beautiful fluffy tail out of threads, glue it onto a cardboard blank. Also glue coffee beans on the body, bypassing the wing, and attach them to the ends of the legs. Glue a magnet on the back of your torso. Decorate the wing with sequins and rhinestones.

We sew, we knit, we embroider crafts of roosters

These needlework techniques will also help you create crafts for the year of the rooster 2017. If you know how to embroider, then the following diagram will help you. Thus, you can arrange a small decorative pillow, an apron pocket made of plain fabric, or make a panel.


If you decide to knit a sweater for a child as a gift, calculate the loops so that this poultry flaunts in the center in front.

The diagram shows which colors to use. To make them all look good, knit a white yarn sweater.


If the listed types of needlework are still beyond your power, then make a cockerel on a stick from the remains of ribbons, threads, and fabric.


Here's what to prepare:
  • a square of linen fabric with sides of 15 cm;
  • red canvas measuring 5 × 20 cm;
  • multi-colored ribbons;
  • soft filler;
  • threads;
  • jute;
  • twig;
  • red yarn;
  • a needle;
  • wooden stick.

  1. Fold the linen cloth diagonally, trim one corner slightly. Stitch one and the other side with a basting seam, but leave free space between these sides, which is marked with a pencil in the photo. Through it, you will subsequently fill the figure with filler, and insert a wooden stick here.
  2. Insert a twig into the cut hole on the corner, fix it with turns of red yarn. This is the head and beak of the cock.
  3. Fill the workpiece with padding polyester. Insert a stick there, secure this part by tying it tightly with red threads.
  4. Take a strip of red felt, fold it in half, and place it on one and the other side of the cockerel's head. Wrap the top and bottom with thread to separate the comb and goatee. Cut the beard at the bottom with scissors.
  5. Fold satin ribbons of different colors in half, attach them to the tail, tie with red thread. Also form the wings of the rooster, just sew them on the sides.
  6. Embroider the bird's eyes with black thread or make them from beads. After which the wonderful rooster symbol of 2017 is ready.


Check out another idea by watching the video. It tells how to make a rooster craft from nylon.

If the children want to learn how to make it out of paper, then show them the second video.

Plastic bottles terrify all environmentalists of our planet. The problem is that repeated use of this (seemingly) convenient device is harmful to the body. How to be? The answer is simple - creativity. New Year's toys from old bottles will create incredible coziness. Making them will be as easy and pleasant as possible, and we will show and tell you how to make them yourself. Let's start with the video.

The easiest craft option

For this craft, you will need:

  • bottom of the bottle;
  • paint / markers / markers;
  • needle, thread, fishing line;
  • paper;
  • ribbon.

It is necessary to cut off the bottom of the bottle (you can take any volume). And then conjure over it: paint or leave the original color, decorate with snowflakes, make a hole and thread the fishing line on which the toy will hang on the tree. You can make a single structure using the same fishing line. All this can be seen in the photo below. We have selected several master classes.

Balls from a bottle

In this case, we just need to cut our bottle into strips. These strips must be the same length and width. They must be glued together at one end, and then at the other in such a way that the future is obtained. christmas ball... This ball can be decorated as you like: - Metal Bull, so you can build on this, and also refer to traditional new year symbols(sequins, ribbons, red / green / gold paints, rain, cones, etc.).

Bells from a bottle

Bells in the form christmas toys decorate the tree with their presence. How to make them - the upper part of the bottle is needed, because it is similar in shape. You will need paper, foil, paints, tinsel, fishing line, tape, glue. Part of the bottle must be wrapped in foil, secured with glue (preferably instant fixation) and decorated with snowflakes, tinsel, etc.

One two Three! Shine Christmas tree!

You will need several bottles for this Christmas tree decoration. Again, we take several upper parts, cut them into small strips, and put them on top of each other. The lower part can serve as a base. They can be secured with glue, but this is optional. Decorate with balls, beads or tinsel.

A few more ideas ...

Toys from bottles are just your imagination, which you can literally realize with your own hands. You can take any paints. The form depends on preference. It is not necessary to take small bottles, for example, you can make a grandfather frost from a five-liter bottle (you can make a beard from plastic spoons). Caps can also become Christmas tree toy... We've picked up a few ideas.

For men, women and children who prefer to create gifts and souvenirs for their loved ones with their own hands, on the eve of the New Year, you can try to independently recreate souvenirs associated with the Eastern horoscope from improvised means. Such a creative approach will surely attract the attention of the patroness of 2019 - the Yellow Earth Pig (Boar), giving the home atmosphere a little magic and a fairytale feeling. Well, if children also participate in the process of repeating one of the master classes, then it is possible that they will take a good example from their parents, repeating this tradition from year to year. In addition, as the belief in the Eastern horoscope says, if an economic, but not a lot of careless piglet likes it, he will give his admirer good luck, health, and just a happy year - it’s interesting, isn’t it ?!

The pig is a domestic animal considered sacred by Muslims. Therefore, in New Year's Eve not only is it impossible to cook dishes from her meat, but it is also necessary to treat her person with respect. Crafts with the image of a cute pig or a charismatic hog are a good addition to the festive interior decor and the main present for family and friends. Embroidery on towels, pillowcases for decorative pillows with a classic cross-stitch and satin stitch, weaving from beads and small beads, macrame art, applications on thick material and cardboard, a handmade postcard, origami art, a figurine made of plastic, dough and elastic plasticine - only part of that , which can be seen in the article below.

Do-it-yourself pig (Boar) symbol of 2019, what crafts can you do?

The choice of a suitable craft with the image of a pig depends on what it is being created for. For example, if you really want to decorate a room, the ideal solution would be to fold intricate but beautiful origami from white paper, garlands of many shiny snowflakes cut from foil, as well as original toys in the form of a heel or a pig's face for decorating a Christmas tree.

The kitchen interior can also be distinguished by sewing a pig-shaped potholder. Well, for the decor of the bedroom and nursery, it would be a good idea to sew pillowcases with hand embroidery, tilde pigs and knitting little piglets from yarn.

Little needleworkers can be offered simple beadwork patterns, puff pastry sculpting and cutting out vytynanki for window decoration. It is very important that you have step-by-step master class with a photo, then the symbol of 2019 with your own hands will come out no worse than that of a professional.

The first master class - embroidery on a decorative pillow (pillowcase)

To highlight the interior of one of the rooms where there is a sofa or a bed, it is enough to embroider a pig on small pillows or pillowcases attached to them. Its image can be located on one part of the pillow or on the entire front side of the product. One pig, lovers, little pigs or fabulous hogs from favorite Soviet and foreign cartoons can be used as a sketch.

To repeat the master class step by step with your own hands, depicting the symbol of the year with the help of a gypsy needle and a floss of threads, you will need not only these tools, but also the rest: a pillowcase (the pillow itself), an embroidery pattern, a hoop (to fix the work), scissors.

The photo below shows the best schemes and templates that will help you make a beautiful applique. They can be printed using a printer at home or at a photo studio. To do this, it is enough to save the version you like by downloading the picture to your desktop or uploading it.

Pig in the meadow (grass) photo

Piglets in caps





MK - a toy-pig on a spruce branch

A piglet can be both a domestic animal and an inanimate object used as a decoration for a beautiful Christmas tree. This is about festive decoration hand made with a pig face.

There are several options for master classes. Some involve the creation of a talisman-decoration made of felt and thickened suede, leather and denim, while others are based on a cheaper and more practical material on a paper basis. The choice depends on the ability to work with this or that material, as well as its availability at home.

The photo below shows examples of unusual toys that are easy to repeat even without experience in the creative field.





Potholder-pig - the third master class

A potholder in the shape of a pig will be a useful and incredibly practical present for the fair sex. A do-it-yourself kitchen attribute will surely attract the attention of both mothers and grandmothers, as well as your beloved sister, close friend and even aunt. The cute face of the symbol of 2019 on the front side of the product will make cooking a brighter and more interesting process, and the kitchen interior will be unique, thought out to the smallest detail.

When choosing colors it is better to prefer the classics of pale pink, coffee and black. The decision depends on what result you want to achieve. For example, if you want to make a pig, then it is better to make a choice in favor of a rich or pale pink shade, and a pig of a dark, calmer shade. The nose and ears can be highlighted in red and charcoal, sew on the eyes in the form of small peas, and use chestnuts, straw, a bow and even a cute scarf as an addition.

Crochet potholder in the form of a pig photo

Potholder pattern photo


Pig (pig) made of buttons - a simple and interesting Master class

The symbol of the year 2019 can be made of paper, fabric and beads, as well as small items available in the needle case of every housewife. It's about the buttons different color and size, mounted on thick cardboard or light-colored plain fabric. Not only an audience of 25+ can make such a craft, but also preschool children and primary school students who have step-by-step photo instructions at hand.

Examples of works and a visual master class in the photo below will help to create incredibly beautiful and unusual crafts for the New Year, which are unlikely to be found in friends and family in the interior of the house.

Origami from paper and cardboard schemes - paper master class No. 5

So that the children do not watch their parents, but are busy with an interesting business, you can try to interest them in the art of origami. The folding of paper according to thoughtful schemes will help to bring to life the figures of various animals, birds, mammals and inanimate objects.

Origami was first created in China many centuries ago, and since then has gained many fans among people of different ages. In large cities, even exercises are being created to master this difficult technique. Teachers who ideally know origami schemes teach children and inquisitive adults what they can do themselves. So why not try to create the symbol of 2019 from a white A4 sheet on the eve of the Christmas holidays.

Master class number 6 - a pig from beads, simple schemes

Weaving a pig, a pig and a hog from beads and wire is not as easy as it seems at first glance. A complex technique takes a lot of effort, time and patience. Each scheme involves a combination of miniature beads of different colors together.

Important! Instead of thin aluminum wire, you can use fishing line, which does not break under load, and can last for more than one year.







Master class No. 7 - felt pig, pattern

If a child loves soft toys and is always happy to receive a new plush pet as a gift from their parents, why not combine business with pleasure by creating a safe gift with your own hands that does not cause allergic reactions. A cute felt pig - although a difficult craft, but worth it, so that it is repeated again according to the master class presented below with a photo.

The symbol of 2019, made with tools such as: a pattern, thread, felt, a needle, padding in the form of padding polyester or cotton wool, glue gun, buttons and paint on fabric to paint the pig's eyes, will help create a masterpiece out of nothing in a matter of hours.

To get the job done, it is enough to repeat the step-by-step master class below to get a soft toy that the child will like, becoming his talisman for the next 365 days.


Master class Pig No. 8 - piggy bank (pig) from a plastic bottle

With your own hands, creating a roomy piggy bank that personifies the shell of the patroness of 2019, the Yellow Earth Pig, is easy to do. True, comparing it with other crafts, it is better for an adult to make it. Because of the small plastic objects necessary in the master class, which need to be cut out with scissors or a knife, sharp edges, wire and oil paint, making crafts with children's hands is not safe and unhealthy. Therefore, if you do a masterpiece, then only your parents.



Master class No. 9 - piglet bowl for the garden and vegetable garden

If you have an empty 5-liter plastic bottle, paint and small bottles at home, making a pig-shaped bowl is not difficult. The step-by-step instructions are almost identical to the piggy bank. The only thing that separates that craft from this is the cutout on the top.

Flowers in a pig-bowl photo

Master class No. 10 - piglet from foarmiran MK

A small pig from foarmiran, or as it is also called - foam Eva, is becoming more and more popular among needlewomen different ages... A resilient rubber or material that resembles a suede surface is what will help create beautiful souvenir, which can be presented to friends, colleagues and good acquaintances in the form of a small presentation.



Master class No. 11 - polymer clay pig

Blind the pig or polymer clay- the same as making a pig from plasticine. To play a small, but very beautiful baby, not only mom and dad, but also their child can, using the elementary step-by-step instructions, as in the photo selection below.


Master class No. 12 - piglet made of satin ribbons

You can create not only crafts, but also beautiful accessories that you can use to decorate the little princess's hairstyle for a matinee or New Year's celebration. The cute pig faces created from coral and peach satin ribbons are an interesting and very unusual addition to high tails, hair tufts and small bumps.

Hair tie with pig (piglet) photo

Master class No. 13 - pig from felt (felted wool)

A soft and neat piglet made of felt fabric can become not only a souvenir that can be put on the wall or presented to a friend, but also a symbolic keychain, an addition to the housekeeper and just a talisman directly related to the symbol of 2019 made by hand.

Craft from a roll of toilet paper

Winder pig toilet paper- allows you to use household items without waste. Step by step creation symbol of the year from improvised means, will allow children under 7 to develop their creative potential.

The photo shows several variations with a pig.

Balloon pig

Despite the fact that balloons are usually used to decorate the interior for a birthday or the appearance of a baby, the New Year is another reason to please yourself and your loved ones with a festive interior. A pig consisting of 10 or more balls will be a good item for New Year's photo session and a reason for a positive mood.

Symbol of 2019 made from newspaper tubes

A do-it-yourself piglet from newspaper tubes and painted with paint can become original piggy bank, a basket for fruits or vegetables, a candy bowl. The choice in favor of one of the decor items depends on the experience of the craftswoman in creating decor items and the interior of the house itself.

Clay pig, photo MK

Clay can be used as the main material to create a small talisman that brings good luck, health and love. DIY polymer clay symbol of the year is a good start for creating simple and complex figures for the New Year.

Pig from geometric shapes

Geometry in creating applications - will teach a child to create beautiful New Year cards and crafts for the holiday. Circles, triangles, cropped ovals, squares - everything that can be combined in one craft.

Especially for men - barbecue from a gas cylinder

Pork can not only be cooked, but also used as a "frying pan". Brazier from an old gas cylinder in the shape of a large pig - can be used as a brazier at a summer cottage.

Important! It is necessary to cut the gas cylinder with the utmost care, rinsing it in advance.

Brazier in the form of a wild boar

Corrugated paper pig

The symbol of 2019 with your own hands according to step-by-step instructions can be made from corrugation. To create a miniature pig, you only need corrugated paper, scissors and a round base for attaching small parts.

In addition to large pigs, corrugated paper can be used for appliqués and 3D postcards.

Figure made of wood do it yourself photo

A piglet can be carved out of wood if you know how to work with it. Well, or as a last resort, purchase a finished work in the store. The decision always remains with our readers.

Examples and ideas finished works can be considered below.



What other materials can you make a piglet yourself? List:

1) scraps of fabric;
2) light bulbs;
3) LEGO constructor;
4) socks;
5) threads;
6) plush;
7) textiles;
8) shells;
9) eggs;
10) tomato.

Nylon piglet, step-by-step master class in the photo

DIY towel pig



Pig 2019 - the symbol of the year made of plywood in the photo:


Finished works and ideas in the photo:

Symbol of the year 2019 with your own hands from a sock photo




The Pig will become the symbol of 2019. Before the New Year, schools and kindergartens often organize contests for the best thematic craft, for this you want to make something unusual and original. There are many step-by-step master classes presented here - how to make a DIY pig craft with step by step photos and video.

The pig is a sincere old woman, she is courteous, kind and extremely scrupulous. She can be trusted with any intimate secret, she will never give or divulge the secrets entrusted to her. She is distinguished by honesty, will never lie, even for her own good, she is simple and vulnerable. But she is not as weak as she is good-natured. According to the Chinese horoscope, the boar is a symbol of pleasure, innocence, passion and fertility. The year of the pig will be successful and favorable for everyone!

For this holiday, you can make a bunch of crafts with your own hands. Holiday gift can be absolutely any, but it will be better if it contains the symbol of the year - a pig. Decide in advance what you want to do for the coming year. The gift should be pleasant, beautiful and useful. But whatever one may say, but every person likes to receive a gift made with his own hands.

Here are the actual ideas:

  1. Sew or tie small copies of the piglets.
  2. Make a postcard with a pig and be sure to write a congratulation in it - a great gift for a colleague and just as an addition to the main present.
  3. Make your pigs a soft toy.
  4. You can make a piggy bank from a plastic bottle.
  5. You can also make pillows for a sofa, armchair, and even a car. Lovely pigs will warm and delight those to whom you present them.

Although the piglets are pink and cute, they love measuring puddles and messing around in the mud. Their often delicate skin color is hidden under a thick brown layer of earth or clay. In this lesson, we blind a pink pig that bathes in a swamp. Let's start the lesson with the selection of material, then knead the mass in our hands, roll up the suitable parts and assemble them into a single product.

Sculpting is a useful and fun activity that is aimed at developing a child's mental abilities in the same way as drawing or creating paper appliqués.

Perhaps you will need such a figurine if you are creating a farm, playing an exciting game of reproducing animal sounds, or staging a play about three pigs. In any case, creating animals with your own hands is always fun.

What you need to work:

  • The main material is pink plasticine;
  • Brown plasticine;
  • Chestnut or acorn - will help save weight;
  • Toothpick - head and torso fasteners.

For work, we can take 1 block of plasticine to get a miniature figurine. An acorn or chestnut will save weight. These fruits have a round shape, so you can mask such a frame inside the body. In any case, we will have to show a fat creature, because all the pigs are very well-fed, so the extra volume of the body will not hurt.

From the prepared pink plasticine you need to make: the body (for it, prepare an acorn or chestnut and a large cake), legs, head and tail. Cut the block into pieces and knead each piece individually in your hands, if you have a dense, not wax plasticine.

Stick a pink cake on the acorn, place between your palms and smooth, roll out the surface. Next, you need to make a ball-head, attach using a toothpick. But the matter is complicated by the dense material that we placed inside the body.

You will have to first make a hole in the acorn so that you can then insert a piece of a toothpick into it. Also make small fragments that will allow you to copy the appearance of the planned pet: ears, patch, tail.

Glue a wide patch on the ball. Sell ​​the dents twice. Glue a little above the eye, and cut out the mouth a little below.

Connect the head with the body with a toothpick. Glue the ears to the head, lowering the cakes down. Glue the tail back and twist it into a spiral. The figurine already looks like a pig.

Make your legs. There is no need to do each one individually. You can form simple rectangular pieces, cut along the tip of a toothpick, then glue two hooves to each piece.

Attach your legs to your torso. Also make a large brown plasticine cake - this will be a swamp where we will place our cute pig. She will love to swim in the sun.

The dweller of the farm - the plasticine pig is ready. She doesn't grunt, doesn't run away, doesn't ask for food - it's just a toy that looks very much like a real animal. Perhaps this is one of those three famous piglets who outsmarted the evil wolf.

In this master class, we will make just such a pig out of an ordinary plastic bottle.

It is better to choose a bottle with a pink cap. But you can also paint any cover with pink acrylic paint.

Cut out the middle of the bottle - we need to shorten it.

We connect the upper and lower parts, if you wish, you can fix them with glue.

  • four foot covers;
  • printed ears and eyes.

You can print our sketch in A4 format.

Cut out all the elements, also do not forget to cut out the strip for the tail.

Using hot glue, fix the ears, eyes and pink jumpsuit.

We attach the legs.

Our glamorous pig is ready!

Such a fluffy and soft pig will turn out from knitting threads.

We need:

  • woolen threads;
  • pink chenille wire;
  • felt;
  • button;
  • ready-made eyes;
  • cardboard.

We cut out two rings from cardboard: an outer circle with a diameter of 7 cm, an inner one 5 cm.

We cut the yarn 1-1.5 meters long into 5-6 threads.

We put two rings together and begin to wrap them with yarn.

We wind until the hole closes.

The last circles can be dragged with sticks.

Then we cut the yarn along the outer edge with sharp scissors.

We spread the rings a little, wrap the middle with thread and tie.

All that remains is to remove the rings and shake the pompom.

From chenille wire make legs, tail and glue.

I didn't have a pink button of the right size for the piglet's patch, so I painted the appropriate button with pink nail polish.

We glue all this to our pompom.

The soft pig is ready!

It took me half a skein of standard yarn.

Origami bookmark

Many parents and all educators devote a lot of time and attention to development. fine motor skills children. Why do this? By developing fine motor skills, you also develop the brain, that is, attention, thinking and memory. How to do it?

For the development of children's fine motor skills, special techniques have been created and many books have been written. But even without knowing all this, you can come up with something new, interesting and useful for your child every day.

For example, you can make an unusual bookmark for books in the shape of a pig using the origami technique. By itself, this unique ancient technique is already designed to develop fingers and hands, as well as attention.

Materials required for making a bookmark:

  • colored paper pink double-sided;
  • scissors;
  • Ruler and pencil;
  • glue;
  • button.

First, we need to build a square with a side of 12-15 cm using a ruler and a pencil.

Carefully cut it out and fold it diagonally once.

Now you need to fold the two corners to the fold, as shown in the photo.

Fold the side corners and wrap them in the resulting envelope. The blank corner is ready. Now we begin to revive it.

We will make a pig out of the resulting corner, so we need to cut the ears out of the same pink paper. A pink large button will serve as a piglet. The eyes can be taken ready for toys, but you can draw and then cut them out.

Gently glue the button, eyes and ears. It turned out to be a funny, cheerful pig that will store the page and you can easily find it.

And what an original gift it will be for dad or grandmother! All the more valuable because it is made with children's pens.

Each of us has pencils and pens. Especially in children. And so that they are all in one place and not get lost, we will crochet a cute pencil holder in the shape of a pig. This pencil holder will perfectly fit into the nursery. In addition, it will not be difficult to tie it.

To knit pencil holders we need:

  • light pink, dark pink and black yarn;
  • hook;
  • needle;
  • a little padding polyester;
  • Cup.

We start by knitting the bottom of the pencil holder. We will tie a circle of columns with a crochet. We knit with light pink yarn.

We will make a sliding loop and knit twelve columns into it. Starting from the second row, we will make increments. In one row in each loop, in the other through the loop, in the next through three loops, and so on. We knit a circle to the size of the bottom of the glass, which will be the base of the pencil holder. We have the bottom ready. It is better to take a heavy glass for the base so that the pencil holder stands firmly and does not fall.

And now we need to slightly raise our next row. To do this, we knit a row behind the back walls of the loops and do not make any more increments. We start to knit the walls.

We knit rows until our knitted cup hides the base. So we tied a regular glass.

We will tie the nose of the patch. We knit it with dark pink yarn. We sew two loops and knit six single crochet into one. We will make increments from the second row. In one row in each eyelet and in the other row through the loop.

Then we knit a row behind the back walls of the loops and knit another row with single crochets.

Now we will knit the ears of the pig. We knit them with dark pink yarn.

Let's make four air loops and in the initial loop we make two double crochets. We knit four reversal rows. And in each of them we make an increase in the first and last column.

With light pink yarn we tie each ear with single crochet columns.

We will tie the eyes with black yarn. In the sliding loop, we will make ten half-columns with a crochet and tighten the loop.

On the patch we embroider minks with black yarn. We sew a patch to the middle of our knitted glass, filling it a little with padding polyester.

And we sew the ears on the sides, folding their wide part in half. To sew the ears evenly, you can find the middle and count the same number of columns in two directions.

Then we sew on the eyes.

All that remains is to embroider a smile. We also embroider it with black yarn.

The crochet piggy pencil is ready!

How to crochet booties

How to tie such adorable booties in the form of pigs for your baby with step-by-step photos, see here.

DIY application from foamiran "Pig"

You can get a little pink pig if you repeat this interesting lesson... Naturally, it is intended for children, they are the big fans of papermaking. The figurine will turn out to be unique, because you need to make it exclusively from circles. In order to somehow diversify the work, we will replace paper with foamiran - an unfamiliar material with a unique soft texture. It will be even more interesting to work with him.

If you have a pink leaf, then it is perfect for a little pink pig, if not, then take paper or foamiran at your discretion. The circles will become parts for making crafts, such a shape will allow you to reproduce the fact that the pig is chubby.

To make the piglet applique, prepare:

  • pink foamiran;
  • blue cardboard;
  • compass;
  • scissors;
  • glue;
  • white paper coin;
  • black marker.

How to make an applique in the form of a pig with your own hands step by step.

Blue cardboard will become a canvas for an interesting foamiran applique. The pink leaf will later become a pig; you need to cut out a sufficient number of circles of a suitable size from it. Such a minimum of materials will be used.

Cut 3 large and 1 small circle from the pink foamiran. The small circle will become the head, one of the larger ones will become the body of the pet. Leave them unchanged. Cut the remaining two large circles in half. While you need 3 semicircles to simulate legs, the hind legs will visually merge, so the second one can not be shown.

Glue a large whole circle in the center - this is the body of the pig, you need to position it so that all other parts of the body fit onto the prepared sheet. Directly to the round body, adjoin one half of the circle - a leg, push the other leg forward a little. But make these 2 details on the same level. Thus, the front legs will already be in place.

On top of the two semicircles, stick a small circle - this will be the head of the animal. Add a leg at the back, turning the piece with the convex side towards the head.

Now you need to use the remaining half from the third large circle. At the second stage of work, we cut 2 of them in half, but only 3 halves were used for the legs. So, the last piece will be used for the ears and tail. Cut 3 segments. Thus, the initially prepared parts will be triangular.

Glue the ears to the head, drop the tips down and hold with glue. Glue another segment in the back in the form of a tail, bend it a few times to show an imitation of a hook. Foamiran figurine is ready. Now you can design the muzzle. Stick a white paper coin in front - a patch, draw black dots. Also make 2 slits - eyes. That's all the manipulation of materials.

The piglet turned out to be very positive, this children's craft will appeal to all kids, because it is easy to perform and bright.

By the same principle, you can perform completely different familiar or exotic animals. Experiments are always interesting and useful for the development of children.

How to make another one, here is such an application.

How to make a chestnut pig with your own hands

Of course, pigs are most often depicted as pink, and chestnuts are often depicted as brown material. We have 2 ways - to mask the chestnuts under a thin layer of pink plasticine, or to use the pink mass only fragmentarily, gluing additional parts of the figure.

The following tutorial details how to make a pet out of natural material... This craft is easy to do, so kindergarten kids will master it. How to do it, see here.

Each child asks mom or dad to buy him a Kinder surprise, not so much to taste delicious chocolate as to see what kind of toy is hidden inside. Did you know that you can make a toy from a Kinder surprise capsule with your own hands? Children will gladly get to work.

Thus, they will experience a triple pleasure: they taste their favorite sweetness, fascinating creativity... With step by step photos here.

Do-it-yourself piggy pigs video lesson

DIY yellow pig from paper

Bookmarks are always appropriate. They are used by absolutely everyone, be it adults - they always like to read at night, be it teenagers who go to school and use textbooks, be it children who are interesting and interesting for their parents. instructive stories... Thus, the bookmark can become a symbolic gift for the New Year, made with your own hands. And it represents the head of a pig. More simple option you will not find. Step by step master class here

To decorate the New Year's table, you can make such a pig from lemon.

Yellow pig - symbol of 2019

People born in the Year of the Pig are usually successful in business. Representatives of this sign are energetic, resourceful and straightforward. They take their business seriously and can go to great lengths to fulfill their desires. Moral and material satisfaction fully characterize the Year of the Pig. But some people can live this year carefree without much money. They do not notice aggression and betrayal in those around them.

In the year of the Pig, the brave and strong people who go ahead in any situation. Boars are hardworking and smart, but at the same time they believe in deception, often confusing it with the truth. Boars prefer to follow a straight path, they are simple and open people who can find mutual language with the society around them.

The pig is a great player. She hides a competitive spirit that she usually does not show to strangers. She often doesn’t believe in herself. Often a bunch of questions revolve in her head, for example, about how she should act correctly in a particular case. This is a very sincere person, he can easily conquer any person with his open and honest thoughts and actions.

The pig sees only good qualities in the people around him. She will not even think that there may be enemies among her close people. She wants to believe that only kind and honest people live in the world. Often she is disappointed in people because of her good-natured attitude. It is almost impossible for someone who has undermined his reputation in her face to become her friend again.

The simplest and cutest do-it-yourself nylon pig