Fashionable knitted women's hats. Knitted hats for women

Now sew on the bump. Ready! Everything is very simple. If you have never tried it before, start knitting with knitting needles from this particular model. Find the color that suits you. Buy yarn skin-friendly and start knitting!

We knit bright. Why not!

When the leaves have fallen, everything is gray around, let's wear bright clothes and our soul will become warmer.
We will knit a hat for women in size 50-52 cm. For the sample we will choose Novita Isoveli yarn (75% wool 25% polyamide 65m / 50g) or with similar parameters - 100 grams of red. Five needles number 5.
The base of the product - (on the face and on the wrong side of the front.loops) Density 15p * 26r = 10 * 10cm
The bottom - we knit alternately.
How to knit a women's hat with your own hands:

First, we will tie the base. To do this, we cast on 16 loops, knit 128 rows, close the loops, sew along the short side. Second stage: from the edge of the plank we collect 84 loops (approximately two loops
of three rows) with 41 toe needles each.
- knit five rows with purl stitch (front side purl loops, purl - front)
- we will knit five rows of the front surface (knit in reverse)
Thus, we knit 25 rows, we begin to decrease the cap according to the scheme:
- each 5 and 6 together, there are 70 p.;

- again evenly subtract 14 loops. On the needles 56;
- we will connect 4p. front satin stitch, 5p. purl stitch;
- we subtract every third and fourth loops, there are 42 left;
- 4p. knit with front stitch, 5p. purl stitch;

- knit all the loops two at a time;

- we pull all the loops onto the working thread, pull them together.

Knitting of a gray women's hat with 2 knitting needles.

If you already have a little experience, you can link this model. I offer a description and knitting patterns for hats with braids and knitting needles for women.

Head size 50-52 cm. Yarn 55% sheep wool, 45% polyamide; 125m / 50g) - 100 grams.
Patterns for knitting hats: one-on-one elastic band, pigtail on 11 loops, zigzag with knobs on 9 loops.
Pay close attention to what we repeat every 8 rows, in a zigzag - every 20 rubles.
The density of the main patterns: with circular needles No. 6.5 - 16.5p * 24p = 10 * 10cm.
Knitting pattern: We collect 80 stitches, close the circle, knit an elastic band 5cm.
Next, we distribute the drawing as follows: * 11p. braid, 9p. zigzag * (from * to * repeat three times)

A little imagination and an ordinary braid will become unusual

The knitted hat model in the photo looks unusual. It seems that there is some unfamiliar pattern here. In fact, everything is simple. When knitting braids, facial loops are most often crossed. In our case, you need to cross the facial with the purl.

So: we need yarn 240 m / 100 grams For example Lanagold Classik - 100 grams.
Pattern density: 17 pet. * 22 r. = 10 * 10 cm. Straight needles number 6. Head size 52-54 cm.
How to knit a hat with knitting needles step by step:

We collect 72 loops, knit with an elastic band 2 * 2 9cm. In the last row, add 10 loops evenly. We begin to knit a pattern according to the scheme:
1p .: Chrome, 1 purl, * 3 persons., 3 purl., 2 purl. * Repeat from * to * 1 purl., 1 chrome.
2 and all even ones - according to the picture;
3r.: Chrome., 1 purl, * 3 loops are transferred to an additional knitting needle at work, 3 purl., 3 loops with additional knitting needles, purl 2 * repeat from * to * 1 purl., 1 chrome.
5, 7, 9 - according to the picture;
The knitting pattern is repeated from rows 3 to 10.
From the end of the elastic, you need to knit 19-20 cm, depending on how long you want the hat, then start to make a decrease. In the first lower row, knit two purls together between the braids. There are 73 loops left.
The second and all even ones are according to the picture.
The third is to tie 2 together the remaining loop between the braids and the purl of the braid. We continue to knit the braid pattern. There are 64 left.
Fifth - tie 2 together from the front loops of the braids. The braid became 2 * 2. There are 55 left.
Seventh - all loops in two together.
We transfer the rest to the working thread, tighten. Sew back seam. Knitting is ready!

Knitting hats with detailed description

As much as we would not want to walk with our heads uncovered, but cold weather comes and it is imperative to wear a hat. Fortunately, now there is a huge selection of hats, they have become part of the image. For example, it is completely simple, often quite loose, slightly hanging down. This is one of the most fashion trends for both women and men.

Let's look at how to knit a simple coral hat with circular knitting, and in this case it will be more convenient to knit with five knitting needles and straight knitting needles.
We knit a hat, combining Alpaca Silk yarn (60% alpaca 40% silk 50g / 100m) and kid mohair Cutnor Cielo 25g / 212m.
The size of the head is 52-55 cm. The density of the sample is 25 loops = 10 cm. Needles No. 3.

We knit 104 loops, knit with an elastic band 2 * 2 - 7 cm.When circular knitting, you need to close the circle. Straight, just knit straight.
What to do after the rubber band? If you want the knitted hat to sit tightly over your head, then you do not need to add anything. If you like more volumetric models then add 10-15%. In our case, we'll add 10 stitches evenly.
I love free models more, but they are more in trend now. It turned out 124 p.
After the elastic, knit 10 cm straight, then we begin to knit the crown of the hat.
For circular knitting: divide all the loops into four equal parts and switch to toe knitting needles of the same size or slightly less = 31p each.

The decrease scheme is as follows:
- the first two on the knitting needle are tied together by the front wall, then with the front ones, without tying three loops.
- the first of these three we transfer to the right knitting needle, we knit the next, then we put on it the one that was reshot, 1 front.
- we repeat the knitting pattern on other knitting needles.
We make reductions in one row until 4p remains. This will tie the beautiful crown of the head to the four neat ribs. We tighten the remaining loops with a working thread, fasten.
It will turn out to be such a perfect top

How to knit the bottom of a hat on straight knitting needles?
- we also divide all the loops into 4 parts. But in the case of knitting a hat with 2 knitting needles, there will be a seam in one sector. We distribute the loops: Edge., 12 faces. , turn the loop over, knit two loops together for the front wall, * 1 front, remove the loop, knit the next one and put it on it
removed, knit 25, turn the loop over, knit two faces together. for the front wall * Knit from * to * three times, 1 person., 1 remove, 1 person. and throw on it an untied one, 11 front hem.
- decreases are made in the front rows until there are 4 loops left.
See even more options for knitting beanie hats.

To make the calculation of the loops coincide, make a sample. If your knitting is less dense, use a larger number of knitting needles. If your density is higher, then the needles are smaller.

Warm knitted hat with needles

Let's now look at knitting a lapel pattern. Such options are always in vogue. For many women, tight-fitting hats do not suit at all. And the lapel gives the volume so that the knitted hat fits perfectly to the face. In addition, these models are much warmer thanks to the double fit.

A detailed master class on knitting hats for free:

Chic braids are always relevant, master class.

Knitting of bulky hats is within the power of not only experienced knitters, but also beginner craftswomen.
Read carefully the ready-made schemes and a description of the knitted hat with knitting needles, watch the video master classes and all the intricacies of knitting will be clear to you.

Hat for women from a fashionable designer with knitting needles

Hats from landre are popular with many women. They are popular for a reason, unusual design in every model. Let's link this model to interesting pattern and precisely matched.

For my pattern of knitting a hat, I used ADELIA MARRA yarn 50gr / 95met (50% wool, 50% acrylic). Consumption 200 grams per set. The density of the pattern is 20 pet. = 10cm Size 54-55 cast on 112 loops with the Italian set and knit 4-5 cm elastic 1 × 1. You will find a video of the Italian set in the description above about hats with braids.

Do you like funny beanies?

Many adolescents, young women, and not only young ones, have recently preferred funny and playful models.
Watch a detailed video tutorial in Russian:

How to knit the double model itself

Yarn 100g / 350m, needles No. 4. You can knit a hat made of mohair, merino or any other thread ..

Cast on 104 stitches in the main color, knit 20cm (front surface). Next, you need to start making subtractions.

Knitting pattern: divide all the loops into four equal parts, mark these sectors with markers. We decrease before and after the marker in the front rows of 4 loops.
When there are 6-10 loops left, we pull them together. This is half of a knitted hat.
Take a yarn of the second tone, carefully collect 102 loops from the loops of the base of the cap. We knit similarly to the first half.
Knitting needles can be straight or circular. In the case of straight lines, you will have to make a seam. But many do not like to knit hats on circular knitting needles due to the fact that they have to pull knitting all the time. It's a matter of habit. You choose!

Having surfed the Internet, I came across many different interesting patterns for knitting women's hats with patterns. I would like to share with you descriptions. Using them, you can easily pick up and knit a beautiful hat. Hope you find it helpful!

You always want to look fashionable and stylish, and even So to keep it warm and comfortable.Good thing modern fashion not knows stereotypes and knitted hats for women 50 years old, photos of which we will show you right now, are no longer considered something frivolous and youthful.A woman over 50, on the other hand, can afford much more than an inexperienced young girl.The depth of shades, a variety of textures, styles and patterns provide an opportunity for a colossal choice and we will be happy to show you that.

hats for women over 50:this is just the beginning

Some may mistakenly think thathats for women over 50 -these are some shapeless stockings or nondescript berets, designed not to attract attention and cover face. However, we categorically do not agree with this!Fashionable Women's hats for adults give are present in the 2016-2017 collection in huge numbers.Moreover, instead of a standard hat with a pom-pom and or a beanie, in which young girls everywhere go, an older woman can afford to wear a luxurious turban or a hat with a veil. And it will look natural and chic. However, about everything in more detail. Let'slet's talk about trends.

1.In hats for women after40s really shouldn't be with pom-poms, rhinestones and other "youth" stuff. Leave that in the past. And here small decor will only decorate your look.

2. Choose deep, rich shades. Don't be afraid to grab attention!

3. You can finally wear berets.

4. Hats-collars for elegant ladies.

5. Hat-turban or hat-turban - and your autumn and winter will turn into a real oriental fairy tale. And how many compliments you will hear!

6. Large knitting, knitted decor is all available for your wardrobe.

7. A stunning trend - winter hats with a veil.

We are sure that there are so many models of capswill not leave you indifferent. We offer you not only just get acquainted with the whole variety of hats, but also make yourselfknitted hats for women over 50 knitting needles with diagrams and descriptions.

V knitted hats for women over 50: schemes and described not

Women's knitted hats today - this is an incredible variety of styles, models,patterns and textures. We present to you several schemes by which you can linkstylish and fashionable autumn hats or warm winter models with a unique pattern.

V from such delicate hat complete with a scarf may appear in your wardrobe.

One pattern - and 2 options can be linked at once.

pay attention to hats with arans - a very suitable option forknitting of the original pattern.

Braids very suitable for women 50-60 years old.

Knit yourself a warm kit original openwork pattern.

Diamond pattern is an excellent solution forelegant image.

We have already told you that your choice is simply amazing and you can afford look stylish and fashionable. If you do not like voluminous fur earflaps, try to knit this option.

Will suit you undoubtedly stylish and unusual shap pointswith a visor.

How to knit an original hat for a woman 40-50 years old?

We have already told you a lot about what chic hats you can knit yourself.

And this model with a wavy pattern will plunge you into a real delight. Warm, beautiful and very original hat, knitted of wool with the addition of mohair.

Model fits for head circumference 54-56 cm, product height - 23 cm.

Yarn composition:

sheep wool - 30%;
alpaca - 18%;
mohair - 18%;
the rest is artificial fiber.

Also prepare the knitting needles for the stocking needles numbered 3.5 and 4.

Description of the work process

We start knitting with an elastic band, alternating the front and back loops.
NS We proceed to the execution of the wavy pattern. We collect the number of loops, a multiple of eight and knit according to the scheme. Pay attention to the numbers on the right - these are odd rows of circular knitting.
Even rows : knit loops according to the pattern, make yarn overs with front loops. The rapport is repeated in width from 8 loops (between the arrows).
Starting from row 55, we make decreases to form the crown. To do this, we knit the 55th, 57th and 59th rows with a decrease in the rapport of 2 loops. When knitting 61 rows, we already subtract one loop in each rapport.
We carry out in height 2 times, starting with 1 row and ending with the 20th(40 rows together). We knit from 41 to 61 rows one time.
By knitting density:
25 stitches we knit 10 rows(10 by 3.5 cm). This is an elastic pattern (needles numbered 3.5 in two strands).
And 33 rows of 24 loops (10 by 10 cm). it relief pattern(needles at number 4, in one thread).
V the tongue starts from the bottom edge ... We cast on the needles at number 3.5 112 loops in 2 threads. Distribute 28 stitches on 4 knitting needles. We knit an elastic band in a circle.
After we knit the required amount (3.5 cm), take the second knitting needles and knit with a pattern in one thread. In each row, 14 rapports are performed.
After tying 16.5 cm (or 54 rows),again we go to knitting an elastic band, with a decrease in the loops.
Having reached the 61st row and knitting it, we make 14 more loops.
Cut off the thread and pull it through the loops, pull it and fix them.
G headwear for women over 50: stylish models for every taste

Women after 50 can afford to wear completely different models of hats, including chic fur options, cozy knitted beanies,incredibly stylish turbans, elegant hats and feminine berets.

For every woman of the fair sex, a knitted hat is not just a must-have wardrobe attribute that helps to keep warm, but also an integral part of a stylish winter look. Choose knitted accessory stands based on the following criteria: color, material, style, accompanying pattern / ornament ... You can find out below how to knit a hat on your own with knitting needles for a woman, develop new models for 2018-2019, focusing on the patterns with an elastic band and a photo.

Knitted hats for women 2018-2019 for the winter from thick yarn

Today, being fashionable and attractive, while maintaining your unique personality, is not an easy task. That is why every girl begins to pick up a hat long before the onset of cold weather: aesthetics should not cause discomfort, it should certainly look elegant, but at the same time remain practical and comfortable.

Fashionable hats made in large knit look very interesting. These items are incredibly warm and can be worn for several seasons.

O Bulge adds a sense of ease to the look without compromising on comfort standards during wear. In order to create a truly unique and unique product, it is worth resorting to handmade... Needlewomen with experience can bring to life the most daring ideas and decorate the hat with prints and complex patterns.

Beginners should follow the diagrams given in the magazines, or step by step video tutorials in order to understand how to knit a voluminous hat with knitting needles for a woman.

Bulky knitted products, which are at the peak of popularity this season, along with things made in the oversized style, can be performed in casual style, sporty, as well as business and romantic. The supposed trend characterizing the new 2018 models is the return of sophisticated feminine looks.

To date, the most current models knitted hats made of thick yarn are:

with lapels (like a cap, stocking or regular knitting, without accompanying ornaments and decorations, double or single);
beanie hat;
"Marshmallow";
hat with ear flaps;
snood hat;
beret;
caps;
hat;
"Turban" / "turban".

A practical and comfortable winter headdress made of thick threads, if properly selected, will be able to advantageously focus on the fragility of the figure and balance the proportions.

Products can have the following characteristics:

for knitting, use acrylic or woolen threads;
a lapel or intricate patterns in the form of braids and bindings can add extra volume;
the indisputable classics are still in trend: black, white, gray colors;
fashionistas who prefer a bright color scheme will like a hat made of unevenly colored yarn or threads of different shades.

Young craftswomen, striving to get away from the commonplace and the classics, can create models with appliqués (bulky glued inscriptions, embroidery, knotting), which will look most advantageous, sitting on the sides of the products.

Thinking about decorating knitted hats, you should take into account the following interesting details:

pom-poms (of various sizes);
ears (this trend is very original, eye-catching, typical for younger women) and tassels;
rhinestones, thorns, sequins, stones;
veil;
a visor (a knitted product, similar to a cap, can ideally emphasize not only the chic of a metropolis, but also a sporty one).

When choosing a color scheme for a product, you should not adhere to certain standards. Knitted hats made of large yarn can be of completely different shades: pastel, classic, a palette of scarlet, yellow, green.

Gradient transitions, as well as monochrome and combined performance are still relevant.

As you know, the pattern is an integral part of all knitted items. This season are relevant fishnet braids large knit as well as complex ornaments. Of course, such schemes will only be able to be done by experienced needlewomen. Beginners can train on an English elastic band (its combination with thick yarn will add the required volume to the product).

Knitted hats for women for the winter from mohair

Mohair is one of the most demanded materials for making knitted hats, it is considered an ageless classic. It keeps warm well, does not cause allergic reactions, it is characterized by extreme lightness and strength, it can be easily washed without shedding during it (translated from Arabic, mohair means “the best”, “the chosen one”).

Can you knit?
To vote

A headdress with rolled edges is a favorite accessory of fashionistas who prefer Street style... Bulky mohair hats have carved a solid niche in the fashion industry. The material can be painted in any color, it does not lose its properties, while maintaining elasticity and natural shine.

The product, made of mohair, has low thermal conductivity and excellent heat retention.

A knitted mohair hat can complement almost any look, its fluffy texture can refresh the look, adding mystery to it.

DIY knitted hats

The new 2019 models are very similar to the previous year. The priority is: comfort, warmth, coziness, convenience and versatility. A beautiful knitted hat should be perfectly combined with a coat, and with a down jacket, and with a fur coat. Otherwise, you can create several models that are specific to different ones.

Also, large knit models remain at their peak, classic and conservative along with original and even shocking ones. Decorations are definitely welcome, especially if you are young, playful, and full of cockiness.

New models of the coming season are presented in a huge variety:

loose and tight (depending on the characteristics of the face, skin and hair color);
simple and laconic, or, conversely, supplemented by third-party elements: cuffs, ears: visor, pom-poms. Combining a hat with outerwear, it is required to adhere to the following principle: the more the accessory is decorated, the more conservative the second wardrobe item should be. Only by fulfilling such a postulate, you can recreate a stylish and harmonious image;
knitted with a simple satin stitch (purl / front), English rubber band or containing unique methods of decoration: braids, plaits, cones, cross patterns.

Thick yarn is the trend of the coming season

A hat made of thick yarn is a unique find among fashion lovers. Its main advantage lies in the fact that when creating it is not at all necessary to use complex circuits and original patterns to give the product gloss and completeness. Chunky knitting is a wardrobe decoration in itself. An image that includes such a headdress and a demi-season parka or an oversized coat in the oversized style will look the most successful.

However, romantic people, lovers of tenderness can find a model to their liking.

To create it you will need:

thick yarn (100% wool 80m / 50gram);
knitting needles No. 4.5, No. 6;

In order to correctly knit such a popular model, you need to cast on 75 loops on the needles 4.5 and knit an elastic band two by two 8 cm high (alternating 2 front and 2 purl).

Work description:

To add baggy after the elastic, add 16 loops evenly. In the event that you want to knit a not very massive headdress, then add 5-8 loops or do not do it at all.
We pass to the needles number 6 and knit 3 rows of purl stitch from the front side.

Seamy side:

1r. (ls) - purl loops;
2p. (is) - facial.

Front side:

1r. (ls) - facial;

2p. (is) - purl.

From the beginning of knitting, it is necessary to knit 28 cm, then proceed to the formation of the crown. To do this, you need to knit all loops 2 together, in the end, 41 loops remain. After one row we repeat the same. The rest are pulled together with a thread.

New knitted hats 2018-2019 (schemes) for youth representatives

Knitted hat - stylish accessory female. Its competent choice will help to create stylish and fashionable winter image... In the coming season, a wide variety of models are popular, among which each representative of the fair sex can find something to her liking.

Turban hat

Hats, made like a turban, add the charm of the east to the image. These hats are not so intricate, but at the same time they are moderately voluminous due to the flowing folds and look amazing on the head. It is worth noting that this accessory is not combined with all outerwear, therefore, when creating an image, try to think over all the details as carefully as possible.

You can knit a turban hat with knitting needles for a woman in one evening, the main thing is to carefully study the schemes given in the magazines presenting the new 2018-2019 models.

This season, fashionable turbans are presented in various colors: black, sapphire, burgundy, emerald, gray. To liven up and add even more uniqueness, you can decorate the front of the hat with a large brooch or an eye-catching metal buckle.

Here's an example of a turban pattern with raised elastic and voluminous folds. For work you will need:

100 grams of wool;
knitting needles number 5.

Work description:

For the sample, we collect 24 loops: 1st row - alternate purl 1 and knit stitches.We knit the 2nd row and all even ones according to the pattern.3rd row - 1 purl loop, then we hook the 2nd front loop to the back wall, then, without throwing it off the knitting needle, the 1st front loop to the front.The 5th row starts from the third row.
Knitting density: 1 cm = 1.5 loops. The raised elastic is designed for the number of loops divided by 3. The hat must be knitted from the back of the head. For accessory size 56, you need to cast on 18 loops (about 12 cm) and tie 4 cm with a raised elastic band. Further, following the same pattern, at the same time we make 5 additions each time from the front side (the addition is a yarn to itself, which is knitted from the wrong side with a front loop behind the back wall).
When there are 11 purl stitches in each track, and 6 along the edges (with the exception of the hem), the additions should no longer be made. The needle should have 68 loops (42 cm), 16 cm high.
Then 5-6 cm are knitted exactly and a gradual decrease begins: in each front row, 5 times, 2 are knitted together with the purl (similar to the additions). It is necessary to reduce the loops until the moment when there are again 18 loops on the spoke. The loops are divided in half and tied separately: each half of the rim is 28-29 cm long, then crosswise. The ends are sewn together, the rim is sewn on.

More detailed and varied schemes for 2019 are given on specialized sites.

Snood hat

To tie fashionable hat- knitting needles for a woman will not be difficult even for beginners. The large-knit model that has become in demand looks more like a scarf, but it looks elegant and will warm you even in the most severe frost.

To work you will need:

200 g of yarn;
circular knitting needles №5.

Work description:

First of all, you need to decide on the width and height of the product. We collect the required number of loops on the circular knitting needles. The proposed model can be made with a Polish rubber band (this is very uncomplicated pattern even for beginners).

We connect the resulting chain of loops in a circle and start knitting:

1st row - 3 front loops alternate with one purl;
2nd row - 2 front loops, 1 purl, 1 front;
3rd row - similar to the first;
4th row - similar to the second.

Universal hat with earflaps

Women's knitted hat with earflaps is one of the well-deserved novelties of the 2018 season, which has gained popularity among young people. A headdress looks the most stylish if it is decorated with textured patterns: braids, ornaments, cones, openwork embroidery, rhinestones, abstract prints.

To work with the calculation of 54 cm (head volume) you will need:

250 g of yarn;
knitting needles number 4.

The product can be knitted in two strands.

Description of work (ears):

Cast on 6 stitches and start the garter stitch pattern, adding along both edges 6 times every two rows along the loop. Then we knit straight 14 subsequent rows. In the event that you add more loops, then the eyelet will be much wider, and more rows will affect its length.

After two identical ears are connected, you can proceed to the hat itself.

Description of work (hat with earflaps):

Now you need to collect everything in one product: we type on the long knitting needle loops alternately from the ears and new ones for knitting the front and back of the headdress. Note! At first, the back of the earflaps will slowly expand, and eventually will be formed from two parts, held together by a mattress seam.
Next, add 1 loop, knit the front loops of one ear and cast on 20 more loops for the front of the cap, knitting the second eyelet and typing 1 loop. Adding stitches to expand the back side in every second row on both sides once 2 loops and once 3 loops (this will be 8 rows and will be the full width of the cap). In order to adjust it, you can add more loops during knitting.
In total, you need to knit about 16 rows, which will ultimately make up the height of the cap before tapering to the crown. The decrease should be done as follows: 1 chrome. loop, 5 front, 2 loops with a tilt to the right, 2 front, 2 loops with a tilt to the left, 5 front, 1 chrome. You need to decrease the loops three more times after every couple of rows, pull the remaining loops after two rows. The hat is stitched at the back with a mattress seam.
For the front lapel, you need to dial 20 loops around the edge and knit with garter stitch to the required height, then close all the loops, and attach the lapel the desired way... For braids, we cut off 18 meter-long threads, which must be folded in half and threaded through the bottom of the ears, and then braided into braids.

Volumetric knitted hat and snood

A set consisting of a voluminous hat and a snood made in a similar style can add harmony and style to the image. The following combinations are possible:

hat and snood made of thick threads, made in one pattern and in one colors;
products of various colors and design, making up an organic duet.

DIY beanie hat, diagrams

A beanie hat is a classic accessory that contains the latest fashion trends. Being one of the most popular models of the 2018-2019 season, this comfortable and very warm thing has taken a strong niche among the fair sex: it can ideally complement both a fur coat and a sports down jacket.

The classic version of the beanie hat is similar to an elongated cap or stocking, it is performed both with simple types of knitting: elastic, hosiery, shawl, and complex patterns. If you are new to needlework and do not know how to knit a hat with knitting needles for a woman, then you should pay attention to the following knitting pattern with a detailed description. Key moment before work - the right choice of color,

A headdress knitted with garter stitch is the simplest and most understandable for novice needlewomen.

Necessary materials:

semi-woolen dense yarn 100m / 100g;
knitting needles number 5;
wide-eye needle;
scissors.

Work description:

We cast on 50 loops with auxiliary thread on needles No. 5 and knit 2 rows. Next, we cut off the thread, at the end we will dissolve it, we again knit a couple of solid rows and begin to knit with shortened ones (this is necessary to round the crown of the head).

The diagram looks like this:

Remove the first stitch (edging) and knit the entire row with the front stitches from the beginning to the crown, leaving the remaining 6 stitches.
Now you need to turn the knitting and continue in the opposite direction so that a hole does not form at the turn. To do this, we twist a loop from the six remaining to the pole.
We throw the loop from the left knitting needle to the right, leaving the working thread below the left knitting needle.
We throw the working thread so that they are above the left knitting needle.
We return the removed loop back - we get the entwined one.
We turn knitting back. Without touching the resulting loop, we knit a row from the top of the head to the beginning. We knit the last loop with the front or purl. The first shortened row is ready.
In the next row, we wrap the fifth loop in a similar way, then the fourth, and so on. In total, six loops are obtained, which subsequently form a wedge of 12 rows, tapering towards the crown.
We knit the second wedge and all subsequent ones exactly as the first. A total of 12 wedges are required.
In unstretched form, the diameter of the cap is about 54 cm, the height is 30 cm.

Important! In order that the edge of the headdress, which will encircle the oval of the faces, does not stretch and does not require crocheting, it is necessary to knit an edge and last loop as tight as possible.

The beanie hat is ready, you just have to sew it. To do this, dissolve the auxiliary thread and sew the open loops with a stitch loop into a loop. You can do this as with a closed edge, there and with a regular seam. Tying a beanie hat is not difficult, especially if you follow the pattern and be careful.

Knitted accessories: hats, scarves, mittens are very popular both among adults and very little ones. Each handmade product is unique and unrepeatable.

To knit a beautiful women's hat with your own hands, you will need not only a knitting pattern and step-by-step instructions with a description of the process, but also:

natural woolen yarn with the addition of acrylic;
large diameter knitting needles;
selected interesting patterns.

Before you start making a knitted women's hat with knitting needles, it is recommended to decide on the style, choose a description of the model and correctly choose all the material that is required to knit a warm accessory. Recommendations for the selection of material.

Yarn selection

There are 3 types of yarn:

It should be borne in mind at what time of the year the hat will decorate and warm its mistress:

for lighter and summer options, it is better to select thin yarn with the addition of cotton or linen threads;
for the winter cold, bulky yarn with the addition of wool will be required.

Warm hats will also need a lining fabric, such as fleece, to help keep the shape of the hat.

Spoke selection

Knitting needles are made from a variety of materials: plastic, metal, bamboo. They are of three types: straight knitting needles with a limiter on one edge, circular knitting needles are interconnected, for example, with fishing line or wire, stockings - there are five knitting needles in a set.

The size of the knitting needles depends on the thickness of the thread and the knitting density. It is recommended to take them twice as thick as the thread used, if the knitting is loose, then it is necessary to use smaller knitting needles, with tight knitting - larger. The characteristic of the yarn is indicated on the labels, where the length of the skein and its weight are prescribed. The less the yarn in a skein per hundred grams of its weight, the thicker the thread.

When using circular knitting needles, you will need a knitting marker and a needle or crochet hook to sew the hats when knitting on straight knitting needles.

When knitting a women's hat with knitting needles for beginners, it is recommended to use straight knitting needles with stoppers at the ends.

The choice of knitting patterns for hats

If desired, any novice craftsman will get a knitted women's hat with knitting needles. With a description, this process will be easier and faster. Exists a large number of a variety of patterns for knitting women's hats, both the simplest and the most complex. Knitting hats starts from the bottom up, mostly with a simple 1 × 1 or 2 × 2 elastic.

Experienced craftsmen advise knitting a 2 × 2 elastic, that is, repeating two front and two purl loops until the end of the row. The row begins and ends with the so-called edge loop: the first loop is not knitted, it is simply thrown from one knitting needle to another, and the last one is always knitted with a purl.

This is done so that when knitting, the edges of the fabric do not stretch. The second and subsequent rows are knitted similarly to the first. The number of rows of the elastic band depends on its height; at the request of the master, it can be either one or five cm. Basically, an elastic band is needed to give more nice looking cap and a tighter fit to the head.

After knitting an elastic band, without breaking the threads, you need to go to the selected pattern, you can continue to knit the entire hat with such an elastic band. For beginners, more experienced needlewomen recommend using simpler patterns for knitting hats with knitting needles.

These include:

Garter knitting... This method got its name due to the fact that it was used when knitting downy shawls. There are two types of garter knitting: front, in which exclusive knit stitches are knitted, and purl - exclusively purl stitches. Such patterns are used for regular knitting on straight knitting needles. The method of knitting hats on circular knitting needles is characterized by alternating front and back rows. The place of transition from one row to another should be chosen in a less noticeable place, for example, behind or on the side, as it will turn out to be slightly noticeable.
Front or back surface- with normal knitting in rotary rows, the 1st row and all odd ones are knitted only with front loops, the 2nd and all even ones - with purl loops; when knitting on circular knitting needles, either only the front knitting needles or only the wrong ones are always knitted.
Relief drawings- for example, the so-called "rice". The alternation of purl and front loops 1 × 1 is performed so that in the second row, the purl is knitted above the front loop of the first row, and the front loop is knitted above the purl. Then the first two rows are repeated to the height required by the master.
Various braids... This pattern is more recommended for experienced craftsmen, but if desired, a beginner master can also cope. When knitting a women's hat with knitting needles according to the "braids" pattern with a description, an additional third knitting needle is required.

Taking measurements from the head for knitting a hat with knitting needles

Before starting knitting, the master needs to take measurements from the head of the person who will own the hat.

First measure- head circumference, this is the main size of the future hat. This measurement is taken around the head: along the forehead at the level of the eyebrow line and along the protruding occipital part at the back.

Second measure Is the depth of the cap. It is also removed from the eyebrow line to the line of completion of hair growth at the back of the head, then this size must be divided in half. When taking the second measurement, it is also required to take into account the features of the future hat.

After taking measurements, you need to determine the number of loops required for knitting a hat.

For this, experienced knitters recommend knitting a small pattern. For a more accurate result, it must be washed and dried, since most hand-knitted products can deform after washing. Then measure the sample with a ruler. Based on the result obtained, calculate how many loops are required for the entire headdress.

Choosing a knitting technique

For beginner knitters, more experienced craftsmen are advised to knit their first hat on straight knitting needles, with one cloth, then stitching it along a narrow edge. Knitting can be started from bottom to top or vice versa from top to bottom. There are also techniques for knitting hats on circular and stocking needles in a circle in closed rows. With this knitting method, there will be no seam.

Experienced needlewomen knit more complex hats with the construction of patterns.

Knitting instruction for simple women's hats for beginners

Any woman who wishes can knit a hat for herself or her loved ones with knitting needles, having at hand a diagram with a description, since modern fashion allows you to wear the simplest and most ordinary hats made with simple patterns.

Simple knitting hat for beginners

To create a simple women's hat with your own hands, you need a skein of yarn 100 gr. composition 50/50 wool, acrylic (length of thread in a skein 240 m), straight knitting needles size 4.5, sewing needle with a large eye. The hat will be knitted with a simple 2 × 2 elastic band. To determine the number of loops to be cast, it is recommended to knit a test piece.

Length knitted fabric will correspond to the head circumference minus 4 cm, and the height will correspond to the depth of the hat. When the desired size is reached, you need to take a sewing needle with a thread and remove all the loops from the knitting needle onto this thread, pull off all the loops, thus creating the crown of the cap. Then it remains only to sew the edges of the cap. The knitted hat is ready.

Voluminous women's hat with braids knitting for beginners

A knitted hat for women with a description can be performed with or without a pompom.

A voluminous knitted women's hat with knitting needles with a description according to the "Braid" pattern will appeal to novice craftsmen. They will be able to connect it by studying in detail the recommendations for creating it. For a hat with braids, you will need two skeins of thick yarn, circular needles No. 3.5 and No. 4.5.

On circular knitting needles of size 3.5, you will need to dial the number of loops, the number of which will be a multiple of 12, plus one additional loop. It is needed in order to close the knitting in a circle. For a beautiful connection of knitting around, transfer the first loop from the left knitting needle to the right, then through this loop from the right knitting needle, lower the last loop and return the first loop removed from the left knitting needle.

It is recommended to start knitting a hat with a simple elastic band 2 × 2, which is recommended to be made to a height of 5 - 7 cm. In the last row, you need to go to the needles number 4.5. Go to knitting a headdress according to the basic scheme: knit 2 purl loops, 6 front loops, 2 purl and 2 front loops, perform throughout the row. Repeat the pattern for another 6 - 8 rows.

Start shaping the braids. Throughout the entire row, alternate the combination of loops: purl 2, remove the next 3 knit stitches on an additional knitting needle or pin, perform the other 3 knit stitches, then knit 3 knit loops from the third knitting needle, then knit 2 knit loops and 2 purl loops.

Draw the drawing to a height of 12 cm, then proceed to decreasing the loops. The first row must be reduced every 3 loops, the second row is knitted without decreases, the third row is to decrease every second loop of the row, the next row is without decreases, at the end, pull off all the remaining loops by threading through them sewing needle with a thread.

You can decorate such a hat with a ready-made fur pom-pom or make it yourself from threads.

This will require yarn, the same color with the cap or contrasting with it, scissors, a sewing needle and two cardboard blanks. It is better to take cardboard for the blank of medium hardness.

Draw a circle with a radius of 1.5 cm on a cardboard sheet with a compass, then from the same cent for a pompom with a diameter of 10 cm, draw another large circle with a radius of 6.5 cm.

Cut along the contour of the outer diameter and inner hole. Make an incision between the circles 2-3 mm wide. Perform the second workpiece in the same way.

Fold the two blanks together, pass the thread between them, which will subsequently tighten the finished pompom.

Wrap the thread tightly around the folded blanks so that the hole is halved.

Next, holding the middle of the prepared pompom with your hand, cut the wound threads along the larger diameter of the workpiece. Tighten the thread that was laid between the two blanks and tie a knot tightly so that the threads do not come out of the pompom. Pull out the blanks. The pompom is ready. Sew it to the top of the cap.

Women's hat with knitting needles for beginners. Master Class

To make a knitted women's hat, you will need a skein of yarn 100 g, measuring 150 - 200 m, composition 50/50, straight knitting needles size 3, a sewing needle with a large eye.

Knitting description

The model of the hat is tied on two straight knitting needles in rotary rows in two types of pattern: a 2 × 2 elastic band (two front and two purl loops are alternated) and the main pattern (Polish pattern). The latter is performed as follows: the edge loop is removed, then the front loop and the back loop are alternated one by one.

Finish knitting a row with an edge loop. She's always purl. The pattern is displaced due to an odd number of loops. Before starting to knit a hat, the masters recommend making a sample of the product - the main pattern. Based on the size of the sample, the number of loops required for the entire hat is determined. It must be even for that.

The height of the elastic of the future hat is 6 - 7 cm.

Having finished knitting an elastic band, go to the main pattern: you need to dial one additional loop or more on the knitting needles, the main condition: their number must be odd and it will depend on the desire of the master or the one for whom this hat is knitted, to get a closer or loose model.

Next comes the main drawing. Its height will also depend on the desire to wear a more form-fitting or bulky hat. So for a tight-fitting hat, it will be enough to knit 10-11 cm of the main pattern, and for a looser one - 16-17 cm with a Polish pattern.

Then the loops are reduced and the top of the cap is formed. In the first row, it is necessary to subtract every third loop, knit the next row without changes. Third row - every second loop is reduced, the fourth - no changes. The fifth row is knitted exclusively with front loops, the sixth with purl. Pull the remaining loops, thread. Sew a side seam.

The hat is ready. If desired, you can decorate it with a flower, brooch or beads.

Fashionable styles of knitted women's hats

Such women's knitted hats are in trend in 2020.

Step-by-step instructions for knitting with a photo

Takes with knitting needles with a cross braid

To create a beret, you will need a skein of yarn 100 g (350 m, 50/50), straight knitting needles number 5 and 6, 1 additional knitting needle for knitting braids, a sewing needle. The size of the beret, at the request of the master, can be favorite and depend on the selected materials and the length of the knitted transverse "braid". Cast on 20 stitches on straight needles number 6. "Scythe" is knitted in rotary rows. The first row is front.

In the 1st row, it is necessary to alternate: 4 purl loops, 12 facial and 4 purl. Turn the work over. 2nd row, on the contrary - 4 front loops, 12 purl loops and 4 front loops. Repeat the first two rows 1 time.

From the 5th row - start knitting a three-strip braid. Knit the first 4 purl loops and 3 knit loops, transfer the next 3 loops to an additional knitting needle behind knitting, then knit 3 knit loops. Return and knit 3 removed loops. Place the other three stitches on an extra knitting needle before knitting.

Knit three more front loops, return to the thrown loops, knit them with front loops. The row ends with 4 purl loops. The 6th row is knitted similarly to the 2nd. In the 7th - 10th, repeat the first two rows twice. Repeat the 1st - 10th rows until the required cap size is reached. Finish knitting, close the loops.

The bottom edge of the hat is made as follows:

On one long edge of the strip on the needles No. 5, cast the loops from the front side, approximately 1 loop is equal to two rows of the braid.
Knit in garter stitch for about 6-8 rows.
Close the loops.

Upper side:

On knitting needles No. 5, cast on the loops in the same way as the lower side plus 2 additional ones to give the required volume to the beret.
Sew 7 rows with front stitch.

Go to decreasing the loops. Continue knitting with front stitch. In the 1st row, knit in one loop every 8 and 9 loops. In the 2nd and further in each even row, do not perform a decrease, all loops are knitted with purl. In the 3rd row, knit every 7th and 8th loop in one, in the 5th row - every 6th and 7th loop.

Continue the decrease until the moment when there are 17 loops on the needles, which will need to be pulled together with a thread with a needle. Hide the remaining end of the thread on the seamy side. Sew a seam. The hat is ready.

Beanie hat (stocking hat)

To create a hat, you need a skein of 100 g yarn (240 m, 50/50 wool / acrylic composition), straight knitting needles No. 4., a sewing needle. The hat is knitted with transverse rotary rows of garter stitching - only front loops. On the knitting needles, you will need to dial 50 loops.

Start knitting:

In the 1st row, knit all the loops with the exception of the last five, turn over the knitting.
In the 2nd row, also knit all the loops with the front ones, while the last edge loop is purl.
3rd row - knit all the loops except for the 4 outer loops.
The 4th and all even rows are knitted similarly to the 2nd.
In the 5th row, it is necessary to leave 3 loops not knitted, in the 7th row, 2 loops remain not knitted, in the 9th - 1 loop, in the 11th, knit all 50 loops.
Then repeat from 1 to 12 rows until the required volume of the cap.
Close the loops and sew the cap.

Knitted bonnet for women

To knit this model of hats, you will need a skein of yarn 100 g (240 m, composition 50/50 - wool / acrylic), circular and straight knitting needles No. 4. For size 54 - 56 cm, you will need to dial 84 loops on straight knitting needles. Begin knitting the hat in rotary rows with a regular elastic band 2 × 2.

First row: the first edge loop (it is removed without being knitted), then the front loop, then there is an alternation of 2 purl and 2 front loops to the end of the row, which ends with a purl. 2nd row - the first loop - hem, one purl, then 2 front loops, 2 purl loops alternate, finish the row with an edge loop, which is knitted with a purl.

Repeat the alternation of two rows up to the 8th row. 8th row - decrease two loops by knitting 28 and 29 loops and 56 and 57 loops in one. From the 9th row, go to knitting a hat with garter stitch, that is, knit exclusively with front loops. From the 11th row, proceed with the decrease.

Knitting of the row begins with the front loop, knit the next 2 front loops with one, 1 front, 2 front loops in one, the next 70 front loops are knitted without change, 1 front, 2 front loops, complete the knitting of the row with a purl loop.

From 20 to 30 rows, knit without decreasing the loops. Go from row 31 to circular knitting with front stitching stitches. Knit 8 more rows this way. In row 39, begin to form the crown of the headdress: knit every 7 and 8 loops together. Knit row 40 without changes.

In the 41st row, each 6 and 7 stitches are knitted together, 42 - unchanged, in the 43rd row - each 5 and 6, 44 rows without changes, in the 45th row - each 4 and 5, 46 rows without subtraction, in the 47th row - each 3 and 4 loops together, 48 without decrease, in 49 rows - each 2 and 3, 50 rows without decrease, in 51 rows - knit every 2 loops into one, 8 loops remain on the needle.

Pull off the remaining loops. The crown and lower ends of the bonnet can be decorated with pom-poms.

Fashionable patterns and patterns for knitting

Knitted hat with honeycomb pattern

For a 54 cm hat, you will need a skein weighing 100 g (footage 240 m, 50/50 wool / acrylic composition), circular needles No. 3, an additional knitting needle, a knitting marker. On the knitting needles, cast on 96 stitches and 1 additional loop to close the knitting around.

Start knitting the hat with a simple elastic band 2 × 2, in which the front loops must be knitted behind the front wall of the loops, the purl loops behind the back. The elastic will be 15 rows high. At the request of the person for whom the hat is knitted, more rows can be knitted. In this case, the hat can be worn with a lapel.

When knitting an elastic in its last row, it is necessary to add loops so that the resulting number of loops is a multiple of 8. To do this, knit two front loops in each first front loop of the elastic. Start knitting hats according to the basic pattern - all the loops will be front. The first two rows must be done with the front stitch.

In the 3rd row - the first 2 loops must be thrown onto an additional third knitting needle at the back of the work, knit 2 loops following them, then 2 thrown loops are knitted. 2 more loops must be transferred to an additional knitting needle in front of the work, knit 2 loops and 2 removed loops following them on the knitting needle. The 8 stitches rapport is complete. It must be repeated until the end of the row.

The next 2 rows are knitted with the front stitch. The 7th row is knitted in the same way as the 3rd, but the first time the loops are removed before work, and the second time at work. Repeat the rapport until the end of the row. Then repeat from rows 1 to 8 to the required height. Go to closing the crown of the knitted women's hat.

To do this, it is recommended to use the following description: Throw the first 2 loops onto an additional knitting needle (based on the resulting pattern at the back of the work or in front of the work), connect the next 2 loops into one, then connect them into one removed loops. Perform until the end of the row. The next 3 rows are knitted with knit stitches without making a decrease.

In the 5th row of the decrease, knit the first 2 loops in one, 1 front, repeat to the end of the row. Next, 2 rows are knitted without changes. 8 row - knit every first and second stitch in one. Pull the thread through the remaining loops on the knitting needle and tighten, hide the end of the thread. Knitting is complete.

Video: knitted hat for women with a description

Fashionable hat with a braid, see the knitting technique in the video clip:

Spring women's hat, see knitting pattern:

A hand-knitted headdress is not a factory stamping, but an exclusive item, a long and painstaking work of a master. How to independently knit a super fashionable hat, determine the size, accurately dial the loops for the initial row, learn how to read the description and diagrams of the selected model and many other nuances for beginners and professionals, you will learn by reading the article.

To knit a hat, you need yarn, knitting needles, knowledge simple patterns and the ability to determine the size of the headgear. We choose the material for knitting hats depending on the season - these are woolen, cotton and synthetic threads. We select yarn for children that does not cause an allergic reaction

Every needlewoman strives to use natural yarn for knitted products, but this is not always justified. A hat made of 100% woolen thread, without the addition of synthetics; It is better if the composition is the golden mean - 50% natural, 50% synthetic fiber — blended yarn.

For work, it is important to choose the right knitting needles, the diameter of which should correspond to the thickness of the thread. Knitting needles are available in plastic, wood and metal.

When working - knitting in a circle, we take five stockings or knitting needles with a fishing line. You can work on two knitting needles, as a result we get a canvas that will have to be sewn at the end of the work, the hat will be with a seam.

Knitted hat with needles: scheme and description of patterns for beginners

For beginners, mastering the wisdom of needlework, you need to learn three alphabet patterns: seamy surface, front surface, simple elastic.

Pattern: Purl surface(garter stitch)

The classic pattern is available for debutants, easy to perform, always looks modern, is one of the main patterns for knitting hats.

1 row: everything is there
2 row: all inside out

Pattern: Knit stitch (hosiery)

Such knitting can be called a classic of the genre; often masters in their works turn to a textbook uncomplicated drawing.

1st row: all persons. NS
2 row: all out. NS

Pattern: Elastic

The most common knitting, most often we start working on products with this picture:

1 row: 2p. persons and 2p. out
2 row: as you can see from the picture

Pattern: English elastic

Popular knitting for scarves, hats, sweaters, looks advantageous on bulky yarn, large knitting needles.

1st row: persons. n, out. NS
2 row: persons. n, yarn, out. p, we remove without knitting
3 row: knit like the first row

Simple patterns for knitting hats with knitting needles schemes and job descriptions - help for those who study and learn the basics of needlework.

Knitted cap sizes: table

In order for the hat to be in size, we will learn how to correctly determine it. To do this, we measure the head circumference, stepping back 1 cm from the upper edge of the auricle and eyebrows. We check the obtained result with the data in the table and determine the depth of the header.

Head size and hats knitting depth chart

How to set the loops correctly so that the hat is of the right size?

The thickness of the yarn does not always coincide with that which is recommended in the description of the models: either the size is specified more or less than the required one, it is necessary to "fit" the headpiece correctly. To do this, we knit a control sample, approximately 10 cm in length. Close the loops and measure its width.

Let's say we knit a hat with a head circumference of 50 cm, you need to know how many loops are required to get started? We measure the control sample in width: it turned out 10 cm, and the loops were typed (hypothetically) 25.

Determination of the number of loops for the cap: nproportion x = 50 x 25: 10 = 125 loops

Output : for a size 50 cap, you need to cast on 125 loops and knit in a length of 17-18 cm, as indicated in the table above.

How to knit a hat for a woman?

Those who skillfully own knitting needles will not find it difficult to knit a collection of hats of different styles for their wardrobe. Women's knitted hat can compete in the palm tree with other types of knitted products in terms of the number of styles and colors.

How to knit a hat "with braids" knitting needles?

The popular braid pattern can be easy to execute - it will be done by a beginner, and difficult - for professionals who masterfully use knitting needles.

Bundles and braids, knitting is very popular, used for various models of hats.

Let's get acquainted with the fashionable this season's “braid with shadow” hat style made with yarn creating a visual graduation effect.

To create such a hat, you will need pink and purple yarn in two strands:

Knitting with pink thread, and then lilac, creates an unusual effect - a smooth transformation of one color into another, without outlining borders.

Phased execution of work:

We collect 80 loops with pink yarn, taking into account its thickness (the thicker, the shorter the length in the skein).
Knit 5-6 cm with a simple elastic band (1x1).
Next, we carry out the main braid pattern (diagram below) with 5 cm pink yarn.
We knit the next 10 cm with a purple thread, after 5 cm we begin to decrease the loops. The hat can be made longer if we knit the main pattern 10-15 cm more than indicated in the scheme of work.

Diagram of a braid pattern of 12 loops

How to reduce the loops on the cap with knitting needles?

At 15 cm from the rim, we make a phased decrease in the loops:

1 row: front, counting 8 loops, knit two front, etc.
2.4 row: purl
3 row: front, counting 6 loops, knit two front
5 row: front, counting 4 loops, knit two together front
The loops remaining on the knitting needle are collected with a needle with a large eye
We decorate the top with a pompom or a piece of natural fur

Video: Knitting hats with the "Braids" pattern

Such a headdress is the best option for the cold season.

How to knit a turban hat with knitting needles?

Beauty is a great power that influences modern fashion and style, which was clearly demonstrated by the charming singer Kylie Minogue. She complemented her image in a fur coat (under which it is difficult to choose a headdress) with a turban hat - a forgotten, without reason, model of the distant seventies of the last century. Knitting masters hastened to replenish their collection with a new-fashioned headdress.

Hat - a turban without knitting, from a scarf

We take a scarf, fold and sew, as indicated in the photo and figure

Fold B, A(fold)
Seam(seam 8 cm)
Graff(depth)

Knitted cloth turban hat

We knit the canvas with a simple elastic band or face loops
The length and width are determined by the circumference of the head
When the canvas is ready, we initially twist it around the head and sew it, as shown in the diagram above

Hats-turban "Edith-Piaf"

A turban hat is an elegant headdress, the shape and pattern of such a product depend on the knitter's imagination. The turban will perfectly complement the image of a woman in a fur coat or a mid-season coat.

How to knit a voluminous hat with knitting needles?

A very fashionable and stylish voluminous cap is a popular model for young people, both for boys and girls.

Little tricks for knitting a voluminous hat:

We choose the yarn thick and fluffy, or we connect it in two or three strands, we use knitting needles of large diameter
We knit an elastic band or a rim with knitting needles of a smaller diameter (for example, No. 4) than the main knitting (needles No. 6)
We choose textured, volumetric, embossed patterns:

english gum
bumps
all kinds of braids, plaits
diagonal stripes
astrakhan knitting
various leaf patterns

Volumetric patterns

Embossed patterns with cloquet effect

How to knit a hat with a lapel knitting needles?

A model of a headdress with a turned-up edge - a lapel - can be of any style, pattern, male, female, or children's version.

How to make a lapel on hats of different styles:

If you started to knit the hat with an elastic band, we make it wide, not of a standard length (7-8 cm), but much larger (15-25 cm), it is easily adjustable. We wear the model in two ways, with and without a lapel, like a voluminous hat.
The hat is completely knitted with one of the elastic patterns, if we plan to wear it with a lapel, we knit it 5-20 cm longer. Such a headdress can transform, change its shape: we make a lapel, it becomes smaller, and unfold - we get a hat-stocking.
It must be remembered that the lapel should look the same on both sides, so you need to choose the appropriate pattern that is identical from the face and the wrong side.

Video: How to knit a voluminous mohair hat with a double lapel?

How to knit a men's hat with knitting needles?

Knitted hat is a demanded and popular headdress among the strong half. Women with knitting needles can knit fashionable, warm hat for her beloved man who can compete with branded models.

The line between women's and men's headwear is leveled, there is only a difference in the choice of color, less often the use of openwork patterns, a minimum of decoration.

How to knit a winter hat for men?

A warm hat requires careful yarn selection. It should be soft, skin-friendly and warm. The main material for hats is chosen different types wool yarn:

mohair
thread with the addition of goat, arctic fox, rabbit down
sheep wool
camel wool
cashmere
angora
alpaca (llama)

When choosing a headdress in shape, preference is given to a small beanie hat. It fits in your pocket, versatile for all seasons. For winter, you can knit an excellent version of a headdress with a double hat or insulate it with a special lining.

How to knit a double hat with knitting needles?

The figure shows a hat in an elongated form, one is inserted into the other and a small lapel is made.

Knitting pattern for double hats

To work you will need:

The yarn is in two colors, dark brown and gray. Composition: wool with small amount synthetics (acrylic, polyester)
Needles with 3.5mm line

Description of knitting double hats:

We start knitting from the middle of the product, in the figure the place is indicated by a red line. To be able to knit in one and the other direction, we make a Turkish set of loops (below in the proposed video this is described in detail):

Divide 56 cm (cap length) into two parts, each half 28 cm
We collect loops taking into account the head circumference and the control sample
The first hat, no pattern, knit 20 cm with front stitch
We start the second hat again from the middle in the opposite direction, picking up the thread on the remaining open loops
We will knit 12 cm of faces. satin stitch and (8 cm) we knit an ornament

How to close the hat with knitting needles?

Smoothly decrease through one row of 8 loops in the front rows, until 10 stitches remain on the needles
We collect 10 sts with a needle on a thread and tie together

Video: Turkish Loop Set

How to knit a simple hat with knitting needles?

For beginner needlewomen the best way test your strength - a simple hat

Description of knitting a simple warm men's hat:

size 58
pattern simple elastic band 2 × 2

To work you need to take:

thick threads, wool 30% + acrylic 70%
stocking needles (5 pcs) # 7, # 8

Whoever knitted a sock on 4 knitting needles will find it much easier to get the job done.

We carry out work:

On the needles number 7, cast on 72 loops and distribute evenly, 18 for each
We knit like a sock with a 1x1 elastic band
After 6 cm, we change the knitting needles to No. 8, shift the pattern exactly two loops, that is, in the place of the front ones we knit the wrong ones and vice versa
After 15 cm, we decrease the loops

How to finish a hat with knitting needles?

The pattern of the hat is an elastic band, it is simple and convenient for decreasing the loops, it looks smooth and neat:

We start decreasing from the purl loops
We knit the next two rows according to the pattern, so that the decrease is not sharp
We connect all the front loops of the elastic together with the front one, and knit the back ones without changing
We knit the next two rows, as we can see, according to the figure
The front and back loops remaining on the knitting needles are connected in pairs with the wrong side
Purl Securing Row
We connect the remaining loops by pulling a needle and thread through them

The men's sports hat is ready, you need to wet it, steam it and you can put it on.

Video: We knit a simple hat with knitting needles

How to knit a baby hat with knitting needles?

We knit baby hats for a newborn, little child(from one to 5 years) and big baby(school age).

Hat for newborns

If a mother or grandmother knows how to knit, even before the birth of the child, they prepare a dowry - knitted children's things, including hats.

For babies, we choose high-quality and delicate yarn:

baby alpaca
microfiber
bamboo
cotton
merino wool
viscose

A knitted hat for a baby is joyful and practical. Everything that surrounds the child should be cheerful, bright, delight him, cause a smile.

Knitted hat for a boy: scheme

A do-it-yourself hat for your baby is an interesting and useful idea. It is better to choose the style of the model for the child himself, he will gladly wear it. You can embroider your favorite cartoon character, the emblem of a famous sports club, a car, your favorite animal on the hat - this will make it fun and funny.

Hat for a child from 3 months to a year

You can fill up your baby's wardrobe with a cute hat with tied ears and an embroidered cat's face.

To work, you need to take:

knitting needles No. 3.5 with fishing line
acrylic yarn with the addition of gray wool
small skein of black yarn
large eye needle

Work description:

The set of loops should be suitable for the age of the baby from 42 to 47 loops
We knit in a circle with the front stitch 16-18 cm (a lot depends on the thickness of the yarn)
Close the loops and sew
We sew each corner obliquely with black or contrasting threads, as a result we get ears
We embroider the muzzle with a black thread according to the proposed pattern
Crochet a chain or weave a braid from threads folded in several rows and sew

Embroidery scheme

It is better for an inexperienced knitter to choose a hat for a boy that is simple to perform. Despite the simplicity of knitting, such models look cute, and most importantly, they will be warm and comfortable for the baby, a great option for cold and inclement weather.

So that the hat fits snugly to the child's head, covers the ears and does not fly off the head, we tie the ears to it.

How to knit ears for a hat with knitting needles:

We knit the ears separately, sew on or crochet to the finished product
We carefully knit the already knitted ears, along the set of loops of the initial row
Having typed the loops from the rim of the cap, we begin to knit the ears different lengths, shape and pattern

We decorate the product with a pompom, crochet the air chains or long braids from yarn folded in several threads.

How to knit a hat-helmet with knitting needles for a boy?

Warm helmet an excellent option for frosty and inclement weather, because it performs a double function: it covers the baby's head and protects the neck. The whole hat is tied with one pattern - an English elastic band.

Knitted hat for girls with needles

The most grateful connoisseurs of knitters' creativity are children. They sincerely rejoice at beautiful things tied by the caring hands of loved ones.

How to knit a hat for a girl? For girls, craftsmen have created many styles of beautiful and warm hats.

Decorate hats:

original openwork patterns
applications
pompoms
embroidery

Threads use multi-colored, bright. It is good if the decision in choosing the style and color will be made by a little fashionista, because it is she who will wear the headdress.

A charming hat for a girl from 2 to 5 years old, it is easy to knit, we use a flower as a decoration crocheted... This headgear is recommended for ages 3 to 5 years.

Material for work

thick yarn 100% acrylic
circular knitting needles with a fishing line 5№

Progress

We knit 4 cm with an elastic band (2x2), we collect the number of loops focusing on the control sample
Next 3 rows of front and 3 rows of purl
We repeat the drawing until the length of the cap from the beginning of work is 17 cm
We make a phased decrease in every second row, we knit two loops together
We sew on a flower, bow or other decoration, it all depends on your imagination

Beautiful and warm knitted products, knitted with your own hand, will always be fashionable and popular, because they keep the warmth of caring hands.