Beautiful knitted mittens with knitting needles. Simple and beautiful techniques for knitting warm mittens with knitting needles

Gentle, warm, comfortable, stylish knitted mittens - what else brings so much inspiration to needlewomen in winter? Moreover, both the process of knitting mittens and the result obtained at the end are excellent. It is quite simple to knit this accessory, and it will look exclusive. If you know how and love to knit, and at the same time you want to make your loved ones an exclusive gift for New Year - there is no cooler idea than making mittens with knitting needles: a description and diagrams are already waiting for you on this page, as well as exclusive video tutorials.

Beautiful mittens with a pattern are a unique, and most importantly, a warm find for those who like to look unusual. Of course, today almost any thing can be bought in a store, however, for your own model of mittens, you can choose yarn yourself, choose a pattern and elegantly decorate your pair of mittens whatever decor you want. Of course, such a designer model in the store will not be cheap, but you can make it yourself.

Before starting work, you should carefully measure your hand so that your future product looks perfect.

What measurements should be taken before knitting mittens?

The girth of the hand along the line from index finger to little finger(we carry a measuring tape over the bones).
From the beginning of the hand to the tip of the middle finger.
From pinky to wrist... The length of the thumb is also taken into account.
We measure distance between thumb and wrist.

Also, for your future masterpieces, you need to choose the appropriate size. There is a special scale of gloves for men, women and children.

When calculating the size of the mittens and measuring the palm, you should take into account the thickness of the yarn and the size of the knitting needles. If the knitting is dense enough, then a little more yarn is needed: when knitting mittens with bundles or braids, we take yarn by 30-40% more e than required.

The yarn is calculated as follows:

for women's mittens - 100-120 g of yarn;
for children - 60-70 g of thread.

The table shows how many loops you need to knit for knitting certain mittens. We start knitting with a brush and knit in a circle on 5 knitting needles ... We knit the cuffs with an elastic pattern- through one front loop and one purl loop, or 2 through 2. Go to the instructions for knitting mittens cuffs for beginners.

Loops we we type on 2 knitting needles.
Then we divide the number of loops into 4 parts(equally) and throw on the knitting needles.
Row of loops close in a circle and tie the ends threads between each other.
The cuffs will be 5-7 cm.
After tying the cuffs, add one loop on each spoke.
We knit the main part of the mittens to the area of the thumb.

Knitted mittens with a pattern: diagrams and step-by-step instructions

Now that you know how to correctly measure and knit cuffs, you can proceed to consider the pattern of mittens with knitting needles with a pattern.

Beautiful patterns on mittens are not just for women. Men's patterned mittens also exist and they look impressive and stylish.

Unusual Christmas mittens will give you a festive mood.

Consider more several stylish schemes.

Mittens with braids knitting needles: diagrams and description

In the process of knitting mittens, it is very important to correctly position thumb... Thumb opening for right mitten will be on the third spoke, for the left - on the fourth spoke. In the photo you can consider a small master class on knitting a finger (one of the options).

We knit a hole for a finger... On each knitting needle you have the same number of loops, for example 12. We knit the first loop on the third knitting needle, and pin the next 10 with a pin.
On the right knitting needle, throw 10 air loops(you removed the same number of loops on a pin). We knit the final 12 loop.
We knit in a circle to the level of the little finger.
Reducing the number of links: on the first and third spoke knit 2 loops each(beginning), and on the second and fourth knitting needles we knit 2 joint loops for 2 upper lobes (end).
On every spoke we reduce the number of links (through a row), until half of the stitches remain on each spoke (from the original number). Reduce the number of stitches in each row.
When you have 8 stitches left, we close the ring and tighten from the inside out.

We knit a thumb

We transfer the removed loops to the knitting needle.
When we knitted air loops, we also have edging. We recruit from them new loops in a multiple of 3.
We distribute the loops on 3 knitting needles and knit round to the tip of the nail. We decrease the loops as described above (in point 4).
We collect and tie the last 6 loops from the inside out.

These 2 patterns will help you master the technique of knitting with braids.

Here is another option for knitting mittens with a braid pattern - cute owl - for girls.

Elegant women's mittens with flowers can be knitted for free on this mk.

How to knit baby mittens with knitting needles?

Perhaps every mother wants to learn how to knit mittens for children. This is another sure way to give your child your love, care and warmth. It is even easier to knit children's mittens with knitting needles than adults, because they are smaller in size.
Instructions for knitting children's mittens will explain to you all the nuances of the work. This knitting method is considered the easiest and most versatile, and mittens are suitable for a child of 7 years old, and for 2 years, and for 1 year (see size table).

And this one set of children's patterns will complicate your task a little, but will cause a storm positive emotions at your baby.

This is how delicate and cool "iron fist"... From the front they look pretty neat, but on the back of the palm there are soft “needles” made of threads, and on the fingers there is a hedgehog's muzzle. This photo contains a detailed mk.

It should also be clarified how to finish work.

The first way. To round off the toe, subtract the loops at the end and in the middle of each knitting needle. We close the last loops into a ring and pull the thread from the wrong side.
Second way. On the first and third knitting needles, we knit every two first loops with a reversal. At the same time, we stretch one loop through the second. On the second and fourth knitting needles, we knit the last two loops together.

And according to this scheme, you can knit mittens on two needles.

This manual contains detailed description, how to knit a finger in an accessory like seamless mittens.

Jacquard patterns also welcomed on children's mittens.

3 knitting needles knit cute chanterelle mittens... Your child will love this new cozy friend.

You are such a beauty can knit on 5 knitting needles.

Popular today mittens with Indian wedge.

Children's mittens with an ornament look laconic and stylish.

We knit mittens: beautiful models with knitting needles

We continue interesting topic knitting mittens and mittens. We have prepared for you a few more ways to knit mittens with knitting needles.

- to stay closer to each other.

Mittens are irreplaceable attribute winter clothes... Very fashionable now knitwear handmade, therefore, the price for them is not small. Do-it-yourself knitted mittens will not only diversify your evening with an interesting affair, but will also help save an extra penny.

Knitting mittens for beginners, step by step

Let's try to knit mittens on five knitting needles. Four of them will hold the canvas, and the fifth will hold the canvas. Before you start knitting, you need to determine your size and how many loops you need.

To do this, you will have to make a sample, according to which we will calculate the exact number of loops and the length of the mittens. Knitting by eye will not work. Measure the length of your fingers, wrist, and hand. Bind the sample according to the obtained measurements.

Next, you should count how many loops are there per centimeter. We do this with a ruler. The number of loops obtained is multiplied by the length of the arm from the wrist to the hand. As a result, you should have a multiple of four. If it is different, take the smaller integer that is divisible by 4. For example, it turned out 47, it is not divisible by 4, let's take 44. It remains only to build a circuit based on the measurements taken and get to work.

To knit, you will need a set of five knitting needles and yarn. It is better to take wool, it is warm and soft. Be sure to pay attention to the size of the knitting needles written on it when buying yarn. If you use unsuitable knitting needles, the loops will constantly either fly off, or you will have great difficulty in catching them. If you have everything ready, then you can proceed.

We start knitting with cuffs. Basically, the cuffs are knitted with an elastic band. We alternate the 1x1 purl and front loops, you can 2x2.

We collect loops, let's say 44 as in our example. So that the edge of the cuff does not press, you need to dial it as loosely as possible, for this you can take a knitting needle one size larger and fold the thread in half. A few examples of how you can cast loops on knitting needles:

So, we connect two knitting needles together and we cast on loops. Slowly and carefully pull out one knitting needle and knit the first row of elastic as tightly as possible. At the same time, distribute the loops into four knitting needles. In our case, 11 each.

After the loops are distributed and the first row is knitted, we close the knitting. Just tie the typesetting and warp threads together. Next, we will knit the cuffs with an elastic band just in a circle for about 6-8 cm in length, and to the base of the thumb with ordinary garter stitch, for beginners this is the easiest option. But if you want, you can put a braid pattern on the back of your hand.

Let's say you have finished 7 cm of elastic and proceed to the main canvas. Select eight stitches in the place where the pattern will be. You can do this with special knitting markers. We will knit these 8 loops as follows: 2 purl., 6 persons., 2 purl. We knit in this way five rows. Next: 2 out., 3 persons. remove on a pin (fasten the pin), 3 persons. Remove the loops from the pin to the left knitting needle and knit with three knit stitches. Next, we knit again five rows according to the previous scheme. On the sixth, use the pin again. And we do this every five rows. The result will be a pattern<<коса>>.

Now we knit a finger and finish knitting.

We apply the canvas to the left hand. For the thumb on the fourth knitting needle, make four faces. Loops. Remove the loops that go on to a pin, replace them with air loops and continue knitting to the top of the little finger. Then start decreasing evenly on each side, applying the canvas to the pattern to check.

Approaching the top of the middle finger, knit the remaining two loops together and pull the end of the thread to the wrong side. Cut off all unnecessary.

There is a thumb left. Cast on stitches around the remaining part of the canvas. Divide them into four knitting needles and knit to the middle of the nail. There, start decreasing evenly. When there are two loops left, knit them and hide the end of the thread from the wrong side. You can decorate the mittens as you like.

Knitting mittens lessons, master class

If everything worked out on five knitting needles, and you have mastered the basics of knitting mittens, let's knit something more complicated. These are such beautiful mittens made of 100% alpaca wool 167m / 50g.

You will need two skeins of yarn. And also stocking needles number 3 plus one more auxiliary, and a hook.

We will knit with a double thread. Distribute 12 stitches on the knitting needles. We have 48 of them.

Now we will knit a pattern.

We return everything back:

We knit with the main thread of the faces. Loops:

We continue to knit. This is how the three rapports of the picture look:

We continue to knit until the fingers are visible, as in the photo:

Let's start working on the thumb. Remove the conventional thread of a different color and put the loops on the knitting needles, four for each:

The second mitten is knitted in the same way.

Sizes for knitting mittens

Measure the circumference of your palm and compare with the table.

Knitting mittens table

Even mittens cannot be knitted without precise numbers and calculations. Not much yarn is used for mittens, no more than a hundred grams for adults and about sixty for children. Patterns increase the consumption of yarn. If you want to add a braid pattern, for example, then you should buy 25% more yarn.

First table for yarn 200m / 50g. Knitting needles approximately 2.5.

Second table for yarn 125m / 50g. Needles approximately 3-3.5.

Indian knitting mittens

Indian knitting of mittens involves knitting the thumb<<индийским клином>>. Such mittens sit very comfortably on the hand, and it fits quite simply. In this design, the thumb begins to knit already from the elastic band. We will consider how to do this below, but here are several options for knitting mittens with an Indian wedge:

Knitting mittens with an Indian wedge

We will knit men's mittens. Yarn Lana gold 800m / 100g and angora 500m / 100g. In general, they begin to knit a wedge immediately after the cuff, but first we will knit several rows and only then we will begin to make a wedge.

To create a wedge, add on the left mitten between the fifth and sixth loops, on the right one between 18 and 19.

Patterns for knitting mittens, schemes with a description

Knitting pattern for children's mittens

Knitting thumb mittens

This method is convenient to use if you knit a pattern on both sides.

To knit a thumb, transfer the loops to two knitting needles, four each. From the opposite edge we collect eight cross stitches and also divide them into two knitting needles of four. We continue knitting the finger in a circle. We reach the middle of the nail and start decreasing evenly. We knit the last loops together, hide the thread.

Another way is knitting a thumb on two knitting needles.

Knitting thumb mittens with a wedge

This type of knitting is called both the raglan finger and the anatomical thumb. Tie the elastic as you need, then proceed as described.

On the third knitting needle, we collect nine air pets, we knit the rest. Further along the pattern we knit mittens to the top. At the same time, not forgetting to decrease two loops on the third spoke so that the wedge goes away. To tie a finger, transfer the loops to the knitting needles. We tie an additional nine loops from the broaches and spread them over two knitting needles. We knit a finger in a circle.

Knitting mittens with braids

Interesting mittens with bulging braids. But before you start doing the work, try to knit the pattern itself separately. This will make it easier for you to understand what knitting density is required for your yarn and how many loops you need.

Cast on 52 stitches on the stocking needles. Distribute 13 of them each. The elastic will be 2 by 2, in forty rows.

Jacquard knitting mittens

You will need about 100 grams of yarn. Needle size 2-2.5. As always, start by calculating the knit and stitch density. Tie the cuff. After that, you can start knitting the pattern. One loop is one cell in the diagram. Work with the pattern carefully, do not pull the threads too tight, but also make sure that the thread does not sag from the inside out.

We knit a mitten with a pattern up to the thumb. Where you remove seven or eight stitches, cast on the same amount of air and continue the pattern to the top. Finish the top in a way that suits you.

We also knit the thumb as it is convenient for you.

To knit such mittens, you will need twice as much yarn. Work on a double mitten also begins with determining the size and calculating the loops. When you have everything calculated and ready, you can start knitting.

Let's say we need 48 loops. Divide them into four needles of 12. Knit twenty rows of elastic. The next fifteen lines we knit only faces. Let's mark the thumb. To do this, knit four loops on the first knitting needle, and remove the next 8 to a pin. Then we again type eight stitches on the first knitting needle and continue knitting the mittens until it is completed. We knit a thumb.

Then we go back to the beginning of the mittens, the first row of the elastic. We collect 48 sts there again and knit 40 rows with an elastic band. Then we knit a mitten according to the pattern passed.

Knitting men's mittens

Knitting principle men's mittens not very different from classic knitting. The only difference is in size. Above, we have already provided a size table by which you can navigate.

Knitting mittens on two needles

On two knitting needles, you can knit prefabricated mittens, that is, you will need to sew parts, or you can do it without breaking the threads. Let's try to link the second option. You will need two knitting needles and optional yarn. The size of the knitting needles should correspond to the thickness of the yarn.

Cast on 24 loops and knit three to four rows with a regular handkerchief stitch. Next, we knit the cuffs with an elastic band 1 to 1. After you knit the cuffs, continue working with the face loops to the tip of the little finger. Then you need to make an even decrease until you have ten stitches left in the middle.

We knit a thumb high, and then we go back in the same way as with the mitten itself. After the finger is ready, we finish the canvas. We tie the faces to the elastic band. and knit an elastic band 1 by 1.

The mittens are ready. Do not forget to try on the product during work so that you do not have to bandage it.

Everyone needs mittens in winter! To knit mittens on knitting needles, we type: children up to 32 loops, women 36-40 loops, men 48 loops. We will knit on 5 knitting needles.

We select the yarn and knitting needles ourselves. Women's I like to knit from goat down on the most thin knitting needles... They turn out to be thin and tightly fit the hand. One skein of yarn is enough for any size. It is better to knit mittens on thin knitting needles so that it is warmer in them. Mittens on top photo knit with needles # 2 from NAKO Tweed yarn.

Description of knitting women's mittens. If you need child size, knit also, leave 5 loops on the finger, if male - 8-10. The main thing is to understand the principle of knitting, and you can adjust the number of loops!

We cast on 41 loops, distribute to 4 knitting needles, close in a circle. ... There are 40 loops left, 10 on each knitting needle. Knit with an elastic band 2 front loops, 2 purl (you can knit with an elastic band 1 front, 1 purl) the desired length.

In the next row, we begin to knit a finger. To do this, remove 6 loops on a pin in the place where the thumb is planned. I use the middle stitches on the second or third knitting needle. And instead of them, in the same row, I type 6 loops on the knitting needle. We continue to knit with the front stitch to the desired length. If I knit mittens for myself, then I put them on my arm and knit until the little finger is hidden.

We begin to decrease the loops in each row. This can be done in different ways. Or we reduce the loops evenly in 4 places, then the mitten can be worn even for right hand, even on the left. On each knitting needle, first we knit the front 2 loops together behind the front wall. (So connected in the top photo). Or we knit the last 2 loops together with the front one for the back wall. This is how I launch mittens for men and children.

Or we subtract from both sides, then when knitting, we already determine exactly where is right, where is left. On the first knitting needle we knit 2 penultimate loops together behind the back wall, last loop front, on the second spoke 1 front, 2 together behind the front, on the third spoke 2 penultimate together, the last front, on the fourth spoke 1 front, 2 together behind the front wall.

So we knit until 4 loops remain. We knit two together, pull the last loop through the penultimate one, tighten. Cut the thread, pull it out on left side... We fix it.

gray downy mittens after several washings, ran on both sides, black ran evenly

We knit a finger. Description.

Remove the loops from the pin on one knitting needle. Next, we will collect loops along the edge of the hole. You should get 14-16 loops. If there is more, in the next row we knit the extra 2 together. I also measure the length of the finger by the hand: I put on a mitten and knit until the finger is hidden. Then we subtract 2 together until one loop remains. We tighten and break the thread. We hide it on the left side and secure it.

Did you see that the gray mittens are without elastic? Just the front surface and when I was picking up the loops, I made a thickened edge. I also liked the mittens, which do not have an elastic band on top, but 2 rows with purl, 4 rows with front loops. 3 such purl "waves".

Another way to knit a finger.

See how good mittens with a thickened edge, knitted of Winter Comfort yarn (70% goat down, 30% acrylic, 100 g = 220 m) green look! I was amazed: the yarn does not fade, after washing the mittens are gone! The length of the cuffs of the mittens can be slightly adjusted: twist the edge (left in the photo) or straighten it like on the right.

In order for the mitten to fit exactly on the arm, we will cast on the knitting needles by 6 loops less, because we will add these 6 loops when knitting a finger. The desired length of the cuff was knitted. In the diagram, these are conventionally rows 1,2,3. (They need to be linked not 3, but 10-30 at your discretion.)

Left mitten. Description

We knit 3 persons on the first knitting needle. loops, make a yarn over, the rest of the loops are front. The next row without additions. So 5 more times.

Now 6 loops, which after the addition track, are removed with a pin. Immediately make 6 yarns on the right loop. Now we knit an even fabric to the end of the little finger. We will do the reductions according to the scheme (there it is indicated by the 20th row).

We knit a finger by adding 10 loops along the edge of the hole. We knit it exactly to the end of the finger (measure on the hand). Now we knit all the loops 2 together until 1 loop remains. Cut off the thread, tighten it well and hide the tail on the left side of the mitten.

Right mitten

On the last knitting needle, without tying 3 loops, we make a yarn. And we knit everything the same way, only in a mirror image, i.e. the loops in the diagram are numbered not from right to left, but from left to right.

How to decorate mittens or see how to knit a finger with the "Indian wedge" is described in

I hope I wrote it clearly! If you have any questions - write comments, I will answer!

How to knit patterned mittens.

We knit mittens with knitting needles in a circle. We start with the cuff. We collect the number of loops, a multiple of 4, + 1 loop. Knit an elastic band * 2 front, 2 purl * of the desired length. Approximately 5-8 cm.

Then we determine where the palm will be on the mitten, where is the back. On the back side we will knit a pattern according to the scheme.

How to knit knit 3 out of knit 3?

Insert the right knitting needle into the 3 front loops, as if we are going to knit them together. Pull out 1 loop (do not lower the loop from the left knitting needle!), Make a yarn over and pull out another front loop from the same place. Now we lower the loops from the left knitting needle. The description is not simple, in fact it fits easily.

We knit a finger in any way. The palm is knitted with the front stitch. On the picture

Indian thumb wedge mittens

You have dialed, say, 44 loops, tied the cuffs at least with an elastic band, at least in a different way.

After the cuff, you need to knit several rows of an even fabric, let it be 5 rows. To do this, from the side of the palm, you knit with the front stitch, and from the back of the palm, the pattern you like will be knitted.

All loops are equally distributed on 4 needles.

Now I will only talk about the palm.

We knit a right mitten.

22 loops palm.
We begin to form a wedge.
16 facial (I explain why 16: the whole finger is 20, but after the formation of the wedge, you will dial 4 loops along the edge of the body of the mittens for the finger), we will knit the next loop (17) behind the front and back walls (two were formed instead of 1 loop), the rest of the loops facial.

We knit the next and subsequent rows in the same way as the first: 16 front, 17 - for the front and back walls, the rest are front. So you add until you have "extra" 16 loops. after that, separate the right 16 loops on a thread or pins, as it is more convenient for you, connect it under your finger with the back side and knit, as usual, a mitten to the end.

Finger.
Where the palm and back side are connected, dial 4 loops from the edge, remove the loops of the finger on the knitting needles and knit the finger as usual.

Left mitten.

Palm.
5 knit, the next knit behind the front and back walls (I turn this loop to face me, then the left and right mittens will look the same in the place of the wedge), 16 persons.

Second row. 6 persons following the front and back wall, 16 persons.

If you need to widen your palm, then in the area "under the finger", you will make a wedge 2-3 wider on the loop, but then for the finger you will also type 2-3 more loops along the edge. But then gradually reduce these loops. My husband has a wide palm, I add loops. Then I turn it down.

Mittens with bullfinches

You will need:

yarn "Pekhorka merino" -100 g; NAZAR-RUS "Crystal" -50 g; VITA COCO - 50 g (100% mercerized cotton);

red, gray, black, white threads for finishing;

beads or small black beads - 10 pcs .;

black, red, white beads with a diameter of 10-12 mm;

sequins-snowflakes sewn on in silver color;

silver beads with a diameter of 0.3-0.4 mm for sewing snowflakes to mittens;

filler: holofiber for berries, sintepon for bullfinches.

Tools:

stocking needles No. 3.0-3.5;

hook number 1 (for apples);

hook number 2 (for bullfinches, strings for mittens);

additional knitting needle (pin or marking rings for knitting);

device for making pompons;

sewing needle.

How to knit MITTENS. Description

Cuffs:

1st row: We start knitting with the use of gray NAZAR-RUS "Crystal" yarn. We collect 44 loops on the stocking needles No. 3 and distribute them 11 loops on each knitting needle. Knit in a circle with purl loops.

1 - 3rd row: purl.

4th - 5th row: knit.

6th - 8th row: purl.

9th - 10th row: knit.

11th - 13th row: purl.

14th - 15th row: knit.

16th - 18th row: purl.

19th - 20th row: knit.

21st - 23rd row: purl.

24th - 25th row: knit.

26th - 28th row: purl.

29th - 30th row: knit.

31st - 33rd row: purl.

34th - 35th row: knit.

36th row: knit in a circle * 2 loops together with a front loop, 1 yarn *. Repeat from * to * to end of row 44 sts.

From the 37th to the 56th row: Knit with front loops in a circle.

57th row: knit 2 knit on the 1st knitting needle, remove 7 loops on an additional knitting needle (pin). We collect an additional 7 loops instead of those that were removed, 2 front. It turns out 11 loops, knitted with front loops on the 1st knitting needle. Next, knit in a circle with knitting stitches from the 2nd to the 4th knitting needle.

From the 58th to the 84th row, knit with front loops in a circle.

Row 85: fold the 1st needle with the 4th; 2nd knitting needle with 3rd and start knitting the rounding of the mittens. We knit from the 1st knitting needles 2 loops with a front loop for the back wall, 9 front loops. 2nd knitting needle: knit 9 front loops, knit 2 together with the front loop on the front wall from left to right; 3rd knitting needle: knit 2 behind the back wall, knit 9. 4th knitting needle: knit 9 front loops, knit 2 together with a front loop on the front wall from left to right;

86th row and subsequent rows until the end of knitting: we knit according to the description of knitting of the 85th row.

Knitting the thumb

1st row: we knit 7 loops from the auxiliary knitting needle, we collect 9 more loops in a circle on 2 knitting needles, in total we knit 16 loops on 4 knitting needles in a circle, distributing them evenly 4 loops on each knitting needle for knitting convenience.

From 2nd to 18th row: Knit with knit stitches in a circle.

From the 19th to the last row: we begin to make decreases on 4 knitting needles, knitting 2 front loops behind the back walls.

When there are 3 loops left on the needle, we knit them together with one front loop, cut off the thread and hide the tip.

We knit the second mitten in the same way that is given in the description, only in a mirror form (direction).

BULLFINCH

We start knitting from the head of the bullfinch with black yarn.

1st row: we collect a chain of 5 vp, we close it in a ring. We tie a ring of 10 tbsp. 6 / n.

2nd row: we knit in each column b / n 2 tbsp. s / n. The total is 20 tbsp. s / n in the second row.

3rd row: knit 5 tbsp. s / n in 1 st. s / n of the previous row, 1 tbsp. s / n, 2 tbsp. s / n in one loop, 1 tbsp. s / 1n, 2 st. s / n in one loop, 5 tbsp. s / n. in one column s / n of the previous row, * 2 tbsp. s / n. in one loop, 1 tbsp. s / n *. We alternate from * to * Knit to the end of the row.

Knitting the breast of a bullfinch

We start knitting with red yarn.

1st row: insert the hook into the 3rd column of the fan from 5 columns of s / n "head of a bullfinch". We knit 2 tbsp. s / n in the 3rd st. fans, 7 tbsp. s / n. Total knitted 9 tbsp. s / n. We continue knitting with gray yarn: 3 tbsp. s / n in each loop, 2 tbsp. s / n in one loop. Total - 5 tbsp. s / n. We turn knitting.

2nd row: knit with gray yarn 5 tbsp. s / n in each loop of the base, we knit with red yarn 8 tbsp. s / n, 2 tbsp. s / n in one loop. We turn knitting.

3rd row: we knit 10 tbsp. s / n red yarn, gray yarn - 4 tbsp. s / n in each loop, 2 tbsp. s / n in one loop. We turn knitting.

4th row: we knit 6 tbsp. s / n gray yarn, red yarn - 9 tbsp. s / n in each loop, 2 tbsp. s / n in one loop. We turn knitting.

5th row: red yarn 2 tbsp. s / n we knit together, 9 tbsp, s / n, gray yarn - 6 tbsp. s / n. We turn knitting.

6th row: gray yarn - 6 tbsp. s / n, red yarn - 10 tbsp. s / n. We turn knitting.

7th row: red yarn 2 tbsp. s / n we knit together, 8 tbsp, s / n, gray yarn - 5 tbsp. s / n, 2 tbsp. s / n in the first loop of the column of the previous row. We turn knitting.

8th row: gray yarn - 7 tbsp. s / n, red yarn - 5 tbsp. s / n, * 2 tbsp. s / n we knit together * From * to * repeat 2 times. We break the thread.

Knitting the tail of a bullfinch

The tail is knitted with black yarn.

From 1st to 3rd row: 6 tbsp. s / n.

4th row: from the side of the breast, we begin to decrease. 2 tbsp. s / n we knit together, 4 tbsp. s / n.

5th row: 5 tbsp. s / n.

6th row: 2 tbsp. s / n we knit together, 3 tbsp. s / n.

7th row: 3 tbsp. s / n. We tie the bird along the contour with black yarn Art. 6 / n., We knit a beak on the head, Art. s / n in 1 loop of the base.

Knitting the wing of a bullfinch

1st row: with gray yarn, we collect a chain of 5 vp, we close it in a ring. We tie a ring of 10 tbsp. b / n.

2nd row: knit in each st. b / n 2 st. s / n. The total is 20 tbsp. s / n in the second row. 3rd row: 3 in. n. lifting, * 2 tbsp. s / n, 1 tbsp. s / n * repeat from * to * 6 times, * 2 tbsp. s / 2n, 1 tbsp. s / 2n * Repeat from * to * 3 times, 2 tbsp. s / 2n. We break the thread.

We knit with black yarn: 3 tbsp. s / n, 3 tbsp. s / n we knit together. 4 tbsp. s / n we knit together, we tie the wing along the contour of Art. b / n black yarn. Sew the winglet with threads to match the body of the bullfinch. Sew a black bead to the head of the bird in the middle.

KNITTING BERRIES

1st row: crochet number 1 we collect a chain from 4 in. etc., tie a ring 6 tbsp. b / n (we use red yarn of a different shade).

2nd row: 12 tbsp. 6 / n (2 p. St. B / n in each p.)

3rd and 4th row: 12 tbsp. 6 / n.

5th and 6th row: * 1 tbsp. 6 / n, ub. * From * to * repeat 6 times.

7th row: we fill the berry with holofiber so that it is dense. Finish by making decreases. With black VITA COCO yarn, we sew a bead with a diameter of 0.3-0.4 mm to the base of the berry crosswise. On the other side of the base, we knit from 10 century. n. twig. We connect 5 pcs. berries among themselves - 1 connecting loop 5 vp. twigs. We knit 3-4 vp. Cut the thread. Sew the twig from the seamy side to the bullfinch.

DECOR

Sew the bullfinch with apples with a fishing line to the surface of the mittens. To add volume under the bullfinches, we lay a synthetic winterizer. Decorate the mittens with snowflake sequins using beads. We knit strings from 140 VP, we thread them into mittens. Decorate with beads, attach pom-poms to the ends of the mittens.

Crochet mittens.

I knit mittens only with knitting needles. For those who want to crochet, I suggest a pattern.

Knitted anatomical mittens.

These mittens fit tightly on the hand, never get lost. Knitted from thick village sheep wool.

How to knit mittens in different sizes.

Here the elastic is 48 loops, the pattern is 60 loops. Some mittens are knitted with needles No. 2.5, the second - with needles No. 3.5.

Beautiful mittens with knitting needles with a pattern

Products connected with a beautiful pattern look original. Such mittens need not be additionally decorated, as they themselves look elegant and exclusive. A beautiful knitting of such a product is in itself simple, it is important to follow the instructions step by step.

To get started, dial 40 loops, evenly distribute them on 4 knitting needles and close them in a circle.
Then we knit according to the scheme, openwork leaves will appear. On row 41, 6 loops are lowered onto a safety pin for a thumb hole and knitting continues, dialing in five loops for balance.
Having knitted all the rows according to the scheme, close the work and proceed to knitting the thumb, distributing 12 loops over 4 knitting needles. 15 rows are knitted with the front stitch, after which 2 loops are knitted at the same time on each knitting needle until the end.

The product for the second hand is knitted in the same way, in a symmetrical reflection.

Knitting mittens with braids: step by step instructions

Warm and original mittens with a braid pattern can be knitted following simple instructions and without deviating from the standard pattern. You can make this product from thick coarse yarn, you can make the product thin and light.

On a pair of knitting needles, dial 52 loops and work double elastic band 20 rows in a circle. In the last row, add two loops.
Starting from the 10th row, knit the finger gradually until 20 extra loops are formed. They are put on a pin and knitting continues according to the pattern.
To knit a finger, knit the desired length, then connect 1 and 2 together at the same time with the front knit, in the last row, 2 front loops. At the end, the remaining loops are pulled together.

The right mitten is knitted according to the symmetrical analogy of the left one.

Knitted mittens with an ornament

You can make your own men's or women's mittens with an ornament from any yarn, but it is advisable to use white or gray threads for the base. Men will also prefer a black base, diluted with gray ornaments.

The pattern can be done with any thread in a contrasting color.

On a pair of knitting needles, 48 loops are recruited, after which they are distributed into 3 knitting needles (16 loops for each).
4 rows are knitted with a double elastic band, after which a colored thread is introduced and a couple of rows are knitted. This alternation is repeated once more. After which the cuff is ready.
They knit four rows with a monochromatic thread using the front surface method, go to the ornament.
For the ornament, the loops are redistributed in half and 24 loops are knitted according to the pattern. Having reached the second mark of the diagram, the number of loops begins to decrease by 2 on both sides. So all the loops are gradually closed.
They return to knitting fingers, which is carried out according to the standard scheme.

If you strictly follow the pattern of the ornament, then the mittens are cool and very creative.

Baby winter mittens ideas

For adults and kids' winter mittens, the idea of owlet mittens is considered a pretty fashionable modern trend. They can be made long and shorter, in the form of tunnels and solid, monochromatic and two-color.

For such an accessory for a girl, it is worth preparing in advance not only knitting needles and yarn, but also beads for owlets, and jewelry that the little princess will prefer.

32 loops are cast on the knitting needles, which are subsequently distributed over 4 knitting needles.
The first 10 rows are knitted with an elastic band using double loops, the 11th row is knitted with the front stitch.
In the 12th row, a pair of loops from the broaches are added, the next rows up to 18 inclusive, are performed with the front knit.
The bird is knitted from the 19th row: on the first two knitting needles there is a front knitting, on 3 and 4 - 4 knitting needles on purl 6 and 6 knitting needles on purl 4.
21 row: on 1 knitting needle, all front loops, on 2 knitting needles, 2 knit loops are removed, 6 thumb loops are removed on a pin, on the third and fourth knitting needles - 4 knit, 2 purl, 4 knit.
From 22 to 24 rows, the algorithm is repeated, but without removing the loops for the thumb.
From 25 to 31 rows are knitted according to the following principle: knit 1 and 2 knitting needles, knitting needles 3 and 4, 4 knitting needles, 2 purl, 4 knitting needles.
From 31 to 41 rows on the first and second are invariably front loops, on the third - 4 purl and 6 front, on the fourth - 6 purl and 4 front.

After the 38th row, the loops are reduced, knitted from each end, 2 loops at the same time. The loops are reduced to 8 pieces, which are then pulled together with a special needle. After the end, the finger is tied in the standard way. To complete the work, small beads are sewn to the birds in the places for the peephole.

Classic knitting mittens (video)

Knitted mittens (video)

Funny mittens will delight lovers on Valentine's Day, little kids will wear them with pleasure. A master class on making such funny accessories for winter for women and children provides for other options for tying attractive characters.

Despite the fact that the 21st century is considered the century of technology, simple needlework remains popular and in demand. In this article, we'll show you how to properly knit good quality mittens or mittens using knitting needles. The described methods are suitable for both knitting mittens for an adult and for children.

The first step is the material!

Learning should be done on good, expensive threads, as well as choosing the right tools. The most common options for knitting needles are metal, plastic and wood (usually bamboo), and it is worth stopping your eyes when choosing them.

Metallic threads do not cling to threads when knitting, they slide quickly when creating loops, while wooden ones are light and smooth, but the process is slower with them.

For the first time, you should choose an elastic, stretching thread, which will provide warmth to your palms. For mittens, there are various options for yarn, for beginners it is better to stop at half-woolen threads - they are elastic enough, do not require a special approach, and as a result they keep their shape perfectly and look beautiful on their hands.

Knitting pattern

Needlewomen have invented many schemes and patterns for creating mittens with knitting needles, so it is not necessary to have a printed manual nearby - all the photos are on the network. The first thing that should be mastered with the help of schemes is the ability to dial loops; if you do not master this basic skill, neither gloves nor other product will work.

Usually the rows of loops repeat each other, if there are no decorations in the author's idea, so it's easy to learn. The most common dialing pattern is circular, so five knitting needles are used at the same time in knitting mittens.

After that, you need to learn how to knit facial loops, tk. the product is sewn into the front and back layers. They differ in density: the loops of the seamy side are completely intertwined with each other, when, like the loops of the front, a certain, even row is observed. If the skill of processing both sides is developed, you can start drawing up a pattern.

Calculation of loops and hand measurement

The measuring stage greatly facilitates future work. For convenience, you need to measure your wrist, fingers and palm. To create your own sample, you should calculate how many loops fit in 1 cm of each parameter.

The result obtained must be multiplied by the length from hand to wrist, then divided by a smaller integer multiple of four. For example, the calculations led to 66. The nearest whole number, without a remainder divisible by 4, is 64, and we take it as a basis.

Are you finished? Then we turn to the main thing - knitting mittens.

The process of knitting mittens with knitting needles

You need to start the process with the cuff. The number of loops that will be needed to create a tight, good cuff should also be divisible by four; the standard length is 7 cm. At the beginning of work, you need to gradually close the loops into a circle, and then knit tightly with an elastic band to the required length so that the extreme part of the mitten can stretch to the size of your hand.

You need to knit until the hole, from which the thumb will then be made. Already at this point, it makes sense to go to the beginning of the pattern, in which one cell will correspond to one loop - it’s easier to calculate and not to be mistaken.

Having made to the base of the thumb, you need to remove several loops for an additional thread - this way the circumference of the finger is adjusted. The same number of air loops must be collected, and then continue knitting up to the little finger. To better see how the mitten will look on your hand, you need to periodically try it on.

The edges of the mittens are made using a decrease in two loops, which are tied together. When the number of remaining loops reaches 8, they also need to be tightly pulled with an additional thread and fastened, and so that the mittens do not start to diverge, the end of the thread must be tucked inward.

At this point, the base of the mitten should be ready. Let's remember the hole and return to it: perhaps this is the simplest part - traditionally, there are no patterns or decorations on the small finger. The mitten can be considered complete, the second should be knitted in the image and likeness of the first, but in a mirror image (so that two left ones do not turn out).

Patterns and decorations

Unadorned perfect knitted mittens will look faded, monotonous. To fix this, even during the creation of mittens, you need to think about what exactly should be on the front or inside.

There are no clear rules, so we turn on imagination: often ornaments, images of animals, beads and much more are used as decoration, including embroidery with multi-colored threads.

If it is desirable to knit to create an ornament different colors, having thought over the picture on the pattern, then everything else is easy to supplement on the finished result.

A couple more options that should be used during creation are braids on the front side or mittens. The latter, however, are knitted differently; there are separate patterns for mitts.