Knitting for children up to one year old envelopes. Knitting technique for a winter envelope for a newborn

Well, a baby was born, and in a few days he was discharged from the hospital. This event was expected for almost a year, so the first appearance of a newborn in front of relatives should be festively furnished. The desired "present" should be presented in a beautiful package, that is, in an envelope that the mother (or grandmother) prepares in advance.

Summer knitted envelope for discharge

You can buy a ready-made item, but it's better to do it yourself. And among the many ideas there is such an option - to knit a summer envelope for a newborn. Mastering this technique is not so difficult.

In anticipation of the newborn, mothers are preparing a dowry for discharge from the hospital. Among other things, the list also includes an envelope in which the baby will be packed. It is necessary not only in cold weather, but also in summer. Despite the sultry weather outside, the baby's body still does not know how to adapt to the world around it. So such an accessory is something akin to a "protective shell".

In children's clothing stores, there is a large selection of beautiful, original envelopes for an extract, but craftswomen sometimes prefer to make a dowry for a baby with their own hands. Along with sewing options, you can often contemplate a summer knitted envelope for an extract from the hospital.

The fact that the thing will be made not with a needle, but with knitting needles and (or) a hook, does not make it unsuitable for a hot pore. Indeed, in this case, the envelope is not knitted from warm yarn - for this, cotton thread such as "Iris" or "Snowflakes", as well as colorful synthetics, are quite suitable.

The technique of making knitted products is not difficult - the main thing is to try to master the principle of creating loops. In the version with knitting needles there are 2 of them - front and back plus a yarn, with which you can create original patterns in various combinations. Crocheting is even easier - with the help of ropes and air loops, as well as columns (half columns), you can create an openwork splendor.

In this version, there are a lot of design possibilities in the design of this product. In addition, a knitted envelope is more practical, since the "summer" threads are easy to wash.

If you accidentally damage the envelope, it will not be difficult to repair it by tying an inconspicuous patch on the place of the defect. Or, as an option, put the same knitted applique on top.

Summer envelope for discharge from the hospital with knitting needles

Even an inexperienced needlewoman can make a knitted envelope for discharging a baby from the hospital, because special patterns are not needed here - this thing is done in one continuous rectangular cloth.

For a light version, a yarn containing 100% merino is suitable, or you can choose cotton in combination with acrylic - about 7-8 skeins of 50 g each. Knitting needles are also selected for the thickness of the yarn (in this version - 4.0 and 4.5 mm).

Preparatory process. First you need to prepare a pattern, which will consist of a front with a lapel, a back and a hood. In total, the entire rectangle measures 34x116 cm. At the same time, 40 cm in length are allocated to the back and front, 10 cm to the lapel, everything else goes to the hood.

Having the exact dimensions of the pattern, it will not be difficult to calculate the required number of loops and rows. If the craftswoman has already decided on the pattern with which she will knit the product, first she must prepare a sample by typing for this on the knitting needles the loops in an amount that is a multiple of the pattern repeat plus 2 for the edges.

Having knitted a small piece of yarn, it must be steamed with an iron, and then measured to determine the proportional ratio of the loops to the width of the sample and the connected rows to its length. Now you can calculate how many loops you need to make an envelope and how many rows you will have to knit for it.

Knitting pattern. When a woman is going to prepare an envelope for a summer statement, knitted with needles, the pattern of the pattern is selected to her taste. An inexperienced knitter can stop at a simple option - a garter or hosiery, but a festive thing will be created, so it is worth decorating the canvas, for example, with "braids".

The description of such a pattern of 12 loops looks like this:

	2?, 8?, 2?
	2 ?, 2x2 ?, 2x2 ?, 2?
	2?, 8?, 2?
	2?, 8?, 2?

In this diagram, the symbols indicate the loops:

? - front;

? - purl;

Crossing loops with direction to the right;

Crossing loops with direction to the left.

The pattern of the knitted summer envelope for the statement includes only the front rows. Purl are knitted according to tradition in this way: over the front - purl, and over the purl - front.

Braid option:

General view of the product. The number of "braids" passing along the canvas, you can choose different, but it is better to stop at 3. They form the edges of the canvas and the middle line. It is better to start the knitting of the product from the side of the hood, and at the end, tie the remaining 10 cm for the front lapel with a 2x2 elastic band (2?, 2?).

Pattern and knitting pattern of an envelope with braids

You can, of course, knit the front part with the back separately, and then sew them along the bottom with the same yarn. The sides are not stitched - loops are drawn along their edge (except for the area under the hood and lapel), and the border for the fastener is tied with an elastic band. At the same time, buttonholes are evenly made along the front part.

To get the finished look of the product, the edge of the hood should be connected in half and sewn. The elastic on the front is turned away and attached to the sides of the product.

Crochet summer envelope

You can knit a newborn's dowry not only with knitting needles, but also crochet. At the same time, original exclusive models are obtained. As a pattern, you can also use the one described under the knitting needles.

You can also make an envelope with sleeves, which is also very convenient. Here, each detail of the product is prepared separately and represented by patterns of a certain configuration:

To complete this product, you will need acrylic thread of average thickness in the amount of 150 g. For crocheting, there is no need to prepare a sample for calculating loops. All fittings will be done according to a pre-prepared template in full size.

To begin with, a chain of air loops is typed, in length equal to the lower edge of the back. As the knitting progresses, where necessary, the loops are added or decreased. To make a beautiful knitted summer envelope for your statement, the crochet pattern is selected to your liking.

Alternatively, you can use the pattern below:

The pattern of the front part indicates the place for sewing in the zipper, therefore, at this level, the left and right halves are tied separately. Having tied the back and in front, they are connected with shoulder seams and begin to knit the sleeves.

To do this, it is necessary to knit a row of columns along the edge of the armhole, as the basis of the sleeve, and continue knitting, moving towards the cuff, gradually decreasing the number of required loops.

When both sleeves are ready, they are sewn together, the side, as well as the bottom edge of the envelope. The hood can be knitted separately, and then sewn into the neckline, or you can follow the example of the sleeves, knitting directly on the product. Now it's the turn of the zipper, which needs to be sewn into its intended place.

Having finished all this work, it is too early to say that the summer crochet envelope for discharge from the maternity hospital is ready. Don't forget about the lining. It can be made from lightweight material (cotton, linen, bikes) by cutting it out according to the existing template and stitching it. Or duplicate the knitted parts and insert the finished purl into the front one. In this case, the color of the threads can be the same, or you can choose a harmonious contrast.

Now it remains to show design skills and embellish the resulting product. For example, along the edge of the hood, you can make a fur trim or sew (or knit) an openwork border.

Fluffy pom-poms and a cute applique on the chest of the envelope (left or right) will add tenderness to the envelope. Decorative ribbons, beads, sequins, colored satin stitch - all these are options for decorating a knitted envelope for a baby's summer discharge.

Every mother wants her newborn to be the most beautiful, so she prepares so diligently for leaving the maternity hospital. If you like the idea of knitwear, you shouldn't give it up. It is not difficult to make a summer envelope for a newborn for discharge using a crochet or knitting needle.

Even in the absence of needlework skills, but with a great desire, you can create amazing beauty for your baby with your own hands.

imalishka.ru

We knit together charming envelopes for a newborn

Waiting for the birth of a baby is a wonderful time when the expectant mother prepares the dowry for the baby's discharge. Of course, you can purchase a ready-made envelope for a newborn from the many options offered. And needlewomen can knit an original envelope for a newborn with their own hands for the winter and off-season. Even a beginner knitter can handle many models.

Children's envelope for winter walks in the photo MK

When knitting a baby envelope, we will use the following abbreviations:

Row - R.
Loop - P.
Facial loop - LP.
Purl - IP.
Nakid - Nk.

Simple envelope for baby knitting needles:

This winter envelope for a newborn is simple and practical; the baby can be worn in it for up to 6 months.

To knit a beautiful envelope, we need the following additional tools:

tender children's pekhorka - 3 skeins;
light yarn for framing - 20 g;
baby buttons - 10 pcs.;
standard knitting needles of suitable thickness.

General progress of work. The children's envelope is performed as follows: knitting begins with a narrow part for the legs, gradually expanding upward.

A simple pattern of horizontal stripes is knitted in the following available way: 2 P 1IP, 4LP, 4IP, 6LP. This patterned composition is repeated 4 times.

Knitting the front. For a small winter envelope, we collect 25P. 1R –LP, 2R –IP. In persons. P need to add 3 P on each side. Then add 4 times to 2P. In each 4 P we perform 1P increments on each side of the envelope. With 32 P, the additions end, the pattern begins with horizontal stripes. We knit a soft envelope for crumbs right up to 48 R, here you need to cut 6P on each side. Now we perform the horizontal stripes pattern, in general, 4 pairs of similar stripes should come out. In each 4 P we make decreases by 1 P. In persons. P needs to be subtracted 14 times by 1P. We close the remaining loops, knit the strap for the small envelope separately:

Backrest execution. The small back for the envelope is made in a similar way, only here we do not make a decrease for the fasteners.

Sleeves. We collect 30 P, knit 6 P with a regular scarf pattern. We perform another 8 P with the front satin stitch, begin to make 1P increments on both sides 4 times in each 4 R. From 24 P we perform 1P decreases on each side in the faces. R. When 30P remains on the knitting needle, we begin to cut the loops into faces. and in out. R. We knit until 4 P remains on the needles, close the sleeve. We carry out the second sleeve in a similar way.

We make strips for fasteners for our winter envelope separately. For such an envelope you will need 4 strips, 2 with holes for buttons, 2 simple strips. We collect 7 P we knit 36 cm of the back plate. The length of the front strips is 32 cm, we make holes for buttons on them. Leave the buttonholes after 2cm.

Hood. We collect 17 P, 4P we perform faces, then we knit vertical stripes. In each 7 P we perform 1 P additions on the left side. 6 P we make facial unchanged. Next, add 5 Ps on the left side. We knit 4 rows in vertical stripes, then we mirror the second part of the hood.

We knit a strap on the hood of the envelope by typing loops along the edge of the product. 6 R is the usual garter knitting, 4 R - all LP. We sew all the details of the warm envelope and steam well ready-made.

In addition to convenient envelopes for babies, you can knit an original baby blanket for a newborn, which will keep him warm in cool weather. Do not overload a warm blanket with thick decorative elements, as they can press on the delicate skin of the baby.

Video: We knit a warm children's envelope

We knit a voluminous blanket for a newborn

The presented fluffy warm blanket for a newborn is knitted with ordinary knitting needles, in the end it will come out very soft and effective. It is easy and simple to knit a blanket, so it is suitable for inexperienced knitters. For such children's products, a standard size is taken: 1.1m * 1.2m.To knit an original children's blanket with our own hands, we need the following consumables:

1 skein of warm baby yarn
tool for circular knitting 2.5 mm.

This beautiful blanket is knitted in the following way: we make a set of 159P, we knit the first 80 cm with the front stitch, close P. LP 6, LP 3, LP 1, LP 7, main pattern. We close the 6P, knit the LP, close the 6P again. We collect a cute blanket with a common identical bar along the entire length. Here is such a beautiful blanket with knitting needles should turn out, as shown in the photo.

Video: Knitting baby blanket "Barbarian"

Warm blanket in the original op-art style

This knitted blanket made of squares will not only warm your baby in the harsh cold weather, but also revive the overall interior of your home:

To knit a children's practical blanket with your own hands, you need to acquire the following materials:

3 skeins of black baby yarn;
2 skeins of white baby acrylic;

Standard knitting needles 2mm, circular knitting tool 2.5mm.

General recommendations for knitting a baby blanket: knit two-color squares with a regular front satin stitch. To prevent a simple jacquard pattern from stretching, it is performed with a special intarsia technique, when the threads used intersect tightly with each other from the seamy side, without forming unpleasant stretch marks. We knit many identical squares, then we sew one knitted square with another. When all parts of the plaid are neatly sewn, we knit a circular edging using regular garter knitting.

General description of the course of work. We carry out square 1 for our cute blanket: we type 26P on the needles with the main dark thread, we knit with the usual front stitch according to the proposed scheme. Persons. R of the scheme is read from right to left, out. R - from left to right. To simplify the knitting process and not get tangled in balls, you can use a separate ball for each colored area. Having knitted 38 P of the general scheme, we close the first square for our blanket:

We knit the second standard square: with the second finishing thread we type 26 P along the edge of 1 of the knitted square. We knit jacquard according to the scheme, changing the colors to the opposite. We knit a two-color blanket with knitting needles in this way until 9 identical squares come out horizontally. Then we knit another 6 such identical strips, connect them with a blind seam. We steam the children's blanket, then we carry out knitted edging around the entire perimeter. To do this, raise 172 P along one side edge. We knit 1P LP directly. Now we alternate the threads: 2P with the main thread, 2P with the finishing thread, 2P with the main thread, 1P with the finishing thread. To complete the upper framing of the blanket, you need to lift 5P and 175P from the side bar from the top to circular tools. We knit, alternating the tone of the thread in the same way. A simple and original blanket is ready to delight and warm the baby. Every loving mother can create warm bedding for newborns.

Nice baby blanket and pillowcase

Cute bedding for babies should be made of hypoallergenic, soft yarn. Bed linen for babies consists of a blanket and a pillow. To get beautiful bedding for a newborn, take the following materials:

delicate children's acrylic - 100 g each in 3 different tones;
circular knitting tools 5 mm.

The general course of creating a baby blanket. This element of bedding is made with 3 types of yarn of different tones, combined with each other. We collect 211P with 1 thread, we knit 1P-LP. Then we knit 2P LP with 2 thread. We knit 2P with thread No. 3. We perform 3P in a row with 1 thread. On 3 R we knit the original pattern: LP 1, LP 2 together, LP 6, Nk 1, LP 1, Nk, LP 6 LP, LP together LP, LP 2 together LP, repeat up to LP 16, then LP 6, Nk, LP 1, Nk, LP 6, decrease left, 1 LP.

In odd rows we knit SP.

10R: 1 LP, 2 together LP, 5 LP, Nk, 3 LP, Nk, 5 LP, double decrease, last 16R - 5 LP, Nk, 3 LP, Nk, 5 LP, decrease to the left, 1 LP.

12R: 1 PL, 2 together PL, * 4LP, Nk, 1LP, Nk, double decrease, single Nk, 1LP, Nk, 4LP *, double decrease to the left, repeat the pattern between * to the last 16P, knit them according to the pattern.

14R: LP 1, LP 2 together, LP * 3, single yarn, LP 7, yarn, 3 LP, double decrease to the left, repeat the pattern from * to the end, the last 16 R - LP 3, yarn, 7 LP, yarn, LP 3, decrease to the left, LP 1.

16 R: LP 1, LP 2 together, LP 2, yarn over, LP 2, yoke, 16 R at the end we also perform, make one decrease to the left, LP 1.

18R: LP 1, LP 2 together, LP 1, yarn over, LP 11, yoke, LP 1, single decrease to the left, LP 1.

20R: LP 1, LP 2 together, 4 times.

Subsequent Ps are 3 Ps we knit LP, alternating threads each R. then repeat the main pattern.

As a result, you should get this kind of bedding for the little one. To knit a pillowcase on a pillow, we calculate the number of typesetting loops on the basis of a knitted blanket, make a pillowcase of the required height, sew the sides.

Video: We knit a blanket for a baby

We knit a comfortable sleeping bag

This adorable baby envelope is ideal for sleeping, as it is very soft and does not restrain the baby. The maximum width of such an envelope is 40 cm. To knit such an envelope, we need:

standard needles 4mm;
circular knitting tool 4mm;
children's delicate yarn - 4 skeins;
small buttons for the strap - 16 pcs.;
simple knitting markers.

The process of knitting an envelope. The sleeping envelope is knitted using two simple patterns. The first pattern - this lovely honeycomb is done as follows:

1-3R - all drugs;
2R: 1p, 1p we remove, 1nakid, 1p;
4R: 2 PL, 1P remove, yarn over, 1 PL.

We repeat the knitting first.

Beautiful children's butterfly pattern: 1-3R - all LP. 2 Р and even Р - all PI.

5R: 2p, 2p we knit, without moving them from the left knitting needle: 1p, another 1p, insert the needle into 2p, then into 1p, through the 2nd P the 1st P is tied, after that the 1st P is knitted with the PL.

13R: 2LP, * 4LP, 2LP knit without moving them from the left knitting needle: 1LP, another 1LP, insert the knitting needle into 2P, then into 1P, through the 2nd P, the 1st P is tied, after that the 1st P is tied LP, 2 last P knit as LP.

16P: all PIs.

Making a knitted sleeping bag. We collect 87P on the front part. We knit with a children's pattern Butterfly 16P. In the next P, we perform a reduction: LP 21, LP 2 together, LP 16-20. We knit with a Butterfly pattern 50 cm.Close P.

For the back of the envelope, we dial 100 P. We also knit with a child's pattern, until we get a canvas of 50 cm. Place markers along the edges of the product. We knit the hood, inseparably from the back. Knit straight for another 18 cm. Fold the knitted hood in half and close the P with the 3rd knitting needle. From faces. raise the sides 121P and knit 15 P with a Honeycomb pattern. Close P completely.

To knit the strips, raise from the right side to the placed marker 116 P. on the left side we still get 139 P, as a result we get 371 P. We knit 8 P with the Honeycomb pattern. We make holes for buttons, knit 7 more R, close P. Sew buttons to the front slats. This lovely baby envelope is ready to use.

Video: We knit a beautiful envelope with knitting needles

Schemes describing knitting envelopes for newborns

handmadefrom.ru

Envelopes for discharge for newborns, knitted: schemes, description, models

Discharge from the hospital is the baby's first holiday. Parents and friends try to get smart clothes, a warm blanket, ribbons and jewelry, which will then be stored as a memory of the fleetingness of happy moments.

Varieties of envelopes

To keep the new man from freezing, he can be wrapped in a warm envelope. Checkout envelopes are sold in almost every baby store. However, parents are not always satisfied with the assortment that is offered there. Envelopes for the statement for newborns, knitted by machine knitting, sewn envelopes, transformer envelopes. The color of the product, the quality of the material, the quantity and quality of jewelry - only the bride appears before a more difficult choice, choosing a wedding dress.

In order not to suffer in doubts, you can knit an envelope for a newborn with your own hands. A knitting master class will help to realize almost any idea, and both grandmother and future godmother can give such a cozy accessory.

Warm envelope

The materials that are necessary for knitting a simple warm blanket are easy to find. The main thing is that the yarn is natural, hypoallergenic, not pricked or felled. The baby should be warm and comfortable. Any hand or machine knitted discharge envelopes for newborns should be comfortable. The composition of the threads is always indicated on the label; manufacturers often designate the yarn for knitting for children as "baby" or baby soft.

To knit such an envelope for a newborn with knitting needles, schemes are not needed. The envelope is knitted on 4 knitting needles in a circle, the 5th knitting needle is working.

Yarn - 100% merino thread, knitting needles - from number 20.

Knitting begins with a set of 20 loops and distributing them on 4 knitting needles. It turns out 5 loops per knitting needle. There are no edge loops in circular knitting. In order not to get confused, the first loop is marked with a marker. Having reached the marker, having made a circle, they understand that the row is complete.

Having knitted 15 rows, close 8 loops and continue to knit on two needles with classic rotary knitting. So knit another 10 rows with the front stitch. Upon completion, the last row is closed and the sides of the rectangular flap obtained at the top are sewn from the seamy side.

Summer envelope

You can knit an envelope in which the child will not be hot in summer using the openwork pattern.

The diagram shows the classic conventions:

The vertical bar is the front loop.
Circle - yarn.
Lambda to the right - two loops are knitted with a front loop along with a bias to the right side.
Lambda to the left - two loops are knitted one together with a bias to the right.
Omega is a crossed loop knitted with the front.
A sign that looks like a video camera looking down to the right - 2 loops are knitted with a crossed front loop at the same time, while tilting to the left. For knitting, the first cross loop is removed, the second must be knitted with an ordinary front loop, and then the one that was removed earlier is pulled through this loop;
A sign that looks like a video camera looking down to the left - two front loops are knitted with a front crossed loop with an inclination to the right side. For knitting, remove the first loop on the knitting needle, then remove the second one behind the back wall, then use the left knitting needle to pry both the second and the first one, and then transfer it to the left knitting needle. After that, the loops are knitted together at the front walls.
Blue cell - "no loop". It should be understood that there is no loop - this is an indication that it is necessary to start knitting the next element according to the scheme - a crochet, front or other loop. This is due to the fact that the pattern refers to patterns in which the number of loops in a row changes.

The diagram describes only the front rows, in the purl loops they are knitted according to the pattern.

If you managed to figure out how to knit a pattern, then you get an openwork pattern that is perfect for a summer envelope.

To knit an envelope, you need to knit a cloth 50 cm wide and 110 cm high. The pattern rapport is 22 loops and 30 rows. Side tracks consist of 3 loops and 4 rows. Having calculated the knitting density, they collect the required number of loops and knit according to the scheme.

Having reached the required length, the hinges of the latter are gladly closed. Side seams are sewn with a knitted seam - it keeps its shape well, will not stretch. The product is turned inside out and steamed so that the yarn takes a three-dimensional shape.

Simple summer envelope

Summer discharge envelopes for newborns do not have to be openwork.

An unusual envelope looks good in simple loops that do not distract from the shape of the canvas.

Such an envelope is knitted with thin knitting needles or garter stitch. The height of the product should be equal to the height of the child + 25 cm for the formation of the head cover, and the width - 3.5 girths of the body - about 70 cm.

Knit a rectangle, the length and width of which correspond to the measured parameters. Then you need to knit a strip 3 cm wide and 50 cm long. It will act as a belt that fixes the envelope. When the strip is ready, it is sewn to the corner on the right side.

The baby is wrapped in such an envelope, as in a cocoon, and tied with a belt.

Diamond envelope

Summer envelopes for discharge for newborns look light and airy if they are knitted of cotton yarn with fine knitting needles. The child's body breathes in them, the baby is warm and comfortable. Cotton yarn keeps its shape well, so openwork patterns are knitted from it.

Legend on the diagram:

+ - front loop (in the purl row, tie the purl);
point - purl loop (knit the front loop in the purl row);
0 - yarn (in the purl row - purl);
triangle with a slope to the right side - knit two loops at the same time with a slope to the right side;
a triangle with an inclination to the left - as the previous one, only an inclination to the opposite, left side.

Envelope of motives

Envelopes for discharge for newborns, knitted from motives, look unusual and beautiful.

First you need to choose the motive from which the envelope will be knitted. Then you need to link the test sample. The sample is necessarily washed, dried and steamed - the yarn after heat treatment can behave unpredictably, which will affect the appearance and size of the product.

Then, based on the parameters obtained, a pattern is drawn. It is a rectangle of motifs. On the pattern, you need to calculate how many motives you need to knit in order to get a product of the required size. For a baby envelope, you need 100 motifs measuring 10 x 10 cm + 25 motifs for processing the hood.

When all the parts are connected, the parts are first sewn together, and then the canvas is laid out and sewn like a regular envelope. Those. the lower corner of the rectangle is sewn on the sides to the right and left parts, and several more motifs are sewn onto the upper corner to make a visor.

A great gift is a knitted envelope for a newborn. With your own hands (a master class will help you do this), it is very simple to tie it. In order for the product to be convenient and comfortable, you should not rush and take on complex work. Novice needlewomen can practice on simpler forms and only then knit envelopes for discharge for newborns. Knitted with love, warm and soft, these accessories will be appropriate as a gift when you first meet a little person.

fb.ru

How to knit an envelope for a newborn

Knitting a walking sleeve is sometimes easier than it might seem at first glance. Most often, you don't even need a pattern and diagrams. You only need to stock up on threads, patience and the desire to dress up the baby. If you are preparing to become a mother, or want to give a gift for the birth of a friend's baby, but do not know the gender of the unborn child, then it is better to knit a universal envelope for a newborn for discharge. In winter, an envelope in the form of a snowman will be very relevant. Such a blanket - an envelope for a newborn can be tried on for both a girl and a boy.

To knit an envelope for a newborn with knitting needles, schemes are not needed in this case, it is enough to consider the description and collect the necessary material:

Yarn (wool, semi-wool) 7 skeins; - buttons 5pcs. can be of different colors; - needle;

Knitting needles # 7, # 8.

To knit an envelope for a statement, you will use the following patterns in your work:

Pearl, in which 2 front loops and 2 purl loops alternate in the first row,

The following rows are knitted like this: over the front - purl and vice versa.;

Garter knitting.

We start knitting a baby envelope for a newborn from the back and sleeves.

We cast on 44 loops. Knit 6 cm with garter knitting needles # 7, and move on to the pearl pattern with needles # 8.

After 25 cm, we make decreases: 1 loop on each side.

And after another 10 cm of knitting, 1 decrease is made on each side.

Do not forget to mark the places of the decrease with colored thread.

After 70 cm from the beginning of the canvas, close 12 loops in the middle, and mark the shoulder with a thread of a different color. Measurements will come from this shoulder line.

Divide the knitting into 2 knitting needles (24 stitches each).

We knit the shelves from the sleeves of a knitted baby envelope for a newborn.

On the spoke, we have 24 stitches for the shelf. The left shelf will be of 5 rows, and then it begins to make a neck with a rounding. To do this, cast on 1 chain stitch, and in every second row make 2 chain stitches, then 3 and 4, you get 34 stitches in total.

Tie 8 loops with garter stitch. This will be the bar.

The length of the plank should be 37 cm.For the first loop, knit 3 cm and make 5 loops every 7.5. cm. From the shoulder line 12.5 cm to the bevel.

Close 6 loops, then 4. Remain on the needle 24 loops, of which 8 loops are a garter stitch. We knit until the bar is 37 cm in length. The bar is knitted with the orientation to those marks that were made earlier.

The second bar is knitted in the same way.

To connect the shelves on the front of the newborn envelope, spread the product so that the tabbed shelf slightly covers the second strap. Remove the stitches of the straps on the third knitting needle (alternate the stitches from both straps, and you will end up with 16 pcs.)

The two planks will now be knitted together 2 sts at a time.

The length matches the back of the statement envelope.

Move to number 7 needles and knit 6 cm in garter stitch. Close the hinges.

Our newborn envelope blanket must have a hood.

It is knitted with knitting needles # 7. 6 cm garter stitch, 52 stitches. then knit with a pearl pattern, going to the needles number 8.

We make decreases 1 loop on both sides in each 4th row. They are made until 42 loops remain. Continuing without decreasing, you should reach a height of 14 cm. Now you need to make a rounding similar to that used when knitting the heel of the sock (divide the loops into three needles of 14). Knit the side pieces, closing the stitches in the middle.

Sew the hood from the body of the envelope along the neckline.

It is better to knit the cuffs of the envelope for discharge with knitting needles separately and sew later. They are knitted from 22 loops along the edge of the sleeve, we use knitting needles # 7. The cuffs will be 6 cm high in garter stitch. Then the loops can be closed.

To make our envelope for a newborn completely ready, sew the sides and bottom, sew on the buttons. 6

Such a charming envelope for an extract can be obtained as a result of knitting.

A do-it-yourself envelope for a newborn is a very simple and very pleasant job. There are several options for making envelopes, the most common are fastening envelope for newborn and a children's blanket in which the baby is wrapped. Today we will consider both of these options: a knitted envelope and a do-it-yourself plaid with a detailed description and photo.

Step-by-step knitting of an envelope with buttons

Such a knitted baby envelope is perfect for a newborn in winter. The braid pattern is easy to knit, and the buttons allow you to quickly and easily hide the baby. The dimensions of the envelope are 125 cm x 40 cm with a hood, without it - 100 cm.
To tie an envelope, you will need the following materials and tools:

the yarn is half woolen, half acrylic for the top and a little thinner for the lining;
knitting needles number 3 and 2.5;
knitting needles with fishing line No. 3;
hook number 2.5;
buttons - 10 pcs;
needle.

The knitted envelope will have two parts: the top and the lining. We start working with the upper part.

Then we proceed to edging the main part with a strap.

The corner of the hood can be decorated with a tassel.

Now the top of your winter jumpsuit is ready and you need to knit the lining. For the lining, you need a little thinner yarn of the same color. Its dimensions are smaller and are determined by measuring from the top of the hood, excluding the strap, and to the fold at the bottom of the envelope. Width is measured only across the width of the pattern, excluding edging.

An elastic band is knitted at the bottom, as well as on the upper part, 4 cm.
Then comes the usual knitting: front stitch or garter knitting. The set number of loops is determined by the knitting density and the selected knitting method.
The lining is made according to the measured distance, its top is sewn by analogy into the hood.

The finished product is moistened, dried and sewn to the main product with a needle and thread.

It remains only to sew on the buttons and the knitted winter envelope for the newborn is ready.

Here is such a winter envelope for a newborn.

Video: We knit an envelope with sleeves

Photo MK and patterns for knitting envelopes for newborns

Knitting a warm winter blanket for babies

An excellent alternative to an envelope for a newborn and a wonderful element of baby's bedding will be a soft warm blanket for a newborn from squares. The blanket is knitted with knitting needles and crocheted, or rather, the main elements are knitted, and they are connected together and crocheted.
For work you will need:

yarn "pompom";
thin threads for tying;
knitting needles number 4;
hook number 2.5;
decoration tape - 4 meters.

The dimensions of a blanket made of squares will be 75 cm x 75 cm. We begin to knit the first element.

The result is such a blanket for a newborn.
To complete the image, you need to knit the edging of the entire blanket.

The result is such a creation - a blanket with knitting needles and crochet.
Such a do-it-yourself blanket is suitable for discharge from the hospital, and for baptism, and just as bedding for newborns.

A cozy and warm envelope is in the wardrobe of every baby, and it serves him from the first days of life, first for discharge from the hospital, then for walking along the street. Any mom can tie it by investing her love and care in the product and making it in a unique and unique style. A knitted envelope, which is perfect for discharge from a maternity hospital for newborns, turns out to be comfortable and compact, and soft and warm wool will protect the baby from bad weather.

Learning to make a knitted discharge envelope for newborns

There are several models of envelopes:

Sleeping cocoon with a hood;
Envelope with sleeves and a hood, with various knitted inserts and decorative elements in the form of lace and ribbons. Does not interfere with the movement of small handles;
A plaid envelope to walk with your child.

What all these models have in common is that the baby should lie tightly in the envelope, so you need to carefully calculate the size of the product. In the first months, babies grow quickly, and you won't be able to use the envelope for long. It is better to knit an envelope for discharge in the form of a blanket with a sleeveless hood, so the baby will be warmer and more comfortable. It can be easily knitted with knitting needles even by novice needlewomen, you can tightly wrap a crumb in it, and after the hospital such a blanket can be used as a blanket at home or for a walk in a stroller.

Usually, for such envelopes, a special lining is made of warm materials (most often from fleece), or they are knitted from soft yarn with a pattern without patterns. For a particularly cold climate with frosty winters, a warming padding polyester is inserted between the lining and the envelope. As a fastener for a plaid, use buttons or a zipper on the sides. Buttons will be very inconvenient and long to fasten, and may interfere with the baby.

In the master class, it is proposed to knit a simple model from a straight cut canvas. The color of the yarn can be selected according to the gender of the child and the color preferences of the parents. For knitting you will need:

Woolen yarn 50% wool, 50% acrylic;
Knitting needles with numbers 3-3.5 for the envelope canvas, 2.5 for the lining;
Lining material. If it is knitted, then acrylic yarn;
Needle and thread;
Fasteners or zippers.

The first step is to calculate the number of required loops for the set. To do this, knit a sample of the pattern with knitting needles and yarn, which will later be used for the product. Knitting style can be different. Depending on the size of the envelope and the type of pattern, the number of loops may vary (the main thing is that the entire pattern fits).

For a knitted envelope for an extract for a newborn baby, the width should be about 40 cm (if the product has buttons as a fastener, then 4 cm from each side should be taken away by the width of the valves). The length will be about 125 cm: 25 cm is the hood, the remaining 100 cm is the envelope.

In this master class, a model associated with a braid pattern is presented. It is made as an example, the pattern can be absolutely anything you like.

We knit an envelope with our own hands:

The first step is to knit a 4 cm garter stitch for the finishing strip, which will frame the envelope in the area of the baby's chest.
You can also knit with a simple elastic band 1 on 1.
We continue to knit with your favorite pattern of the required length, then close the loops, starting from the second edge. The envelope can be made without a strap, in which case the edge will go into the hood.
Further, depending on the type of fastener, knitting has several options. For a zipper, a bar is not needed and the fabric will immediately be knitted across the entire width. If buttons are chosen as a fastener, then we select loops from the sides of the winter envelope and decorate 4 cm with garter stitch or an elastic band.
The loops must be closed and removed so that the ends of the threads are not visible. To obtain a hood, fold the upper side of the product in half and sew together.

Lining:

The lining can be knitted with yarn of the same color, but the thickness of the yarn should be thinner. The size of the lining will be smaller than the main canvas. We finish the work with the same garter stitch or elastic band.
Insert an insulating layer between the lining and the newborn envelope and sew everything together. We leave the upper bar untouched, through which knitting will need to be turned out.
Sew the zipper between the lining and the front side of the envelope. Sew the buttons to the envelope at an equal distance from each other.
Carefully connect the lining to the strap and carefully steam the finished envelope.

If desired, the hood can be decorated with a brush. To do it is simple: for a cord, fold the thread 4 times, about 8 cm long. The tassel is sewn to the hood in front of the lining.

Video tutorials on the topic of the article

Several video tutorials on how to tie an envelope for a statement, for a more illustrative example.

To knit an envelope for a newborn with knitting needles, schemes are not needed in this case, it is enough to consider the description and collect the necessary material:

- yarn (wool, semi-wool) 7 skeins;
- buttons 5pcs. can be of different colors;
- needle;
- knitting needles # 7, # 8.

To knit an envelope for a statement, you will use the following patterns in your work:

Pearl, in which 2 front loops and 2 purl loops alternate in the first row,

The following rows are knitted like this: over the front - purl and vice versa.;

- garter stitch.

We start knitting a baby envelope for a newborn from the back and sleeves.

We cast on 44 loops. Knit 6 cm with garter knitting needles # 7, and move on to the pearl pattern with needles # 8.

After 25 cm, we make decreases: 1 loop on each side.

And after another 10 cm of knitting, 1 decrease is made on each side.

Do not forget to mark the places of the decrease with colored thread.

After 70 cm from the beginning of the canvas, close 12 loops in the middle, and mark the shoulder with a thread of a different color. Measurements will come from this shoulder line.

Divide the knitting into 2 knitting needles (24 stitches each).

We knit the shelves from the sleeves of a knitted baby envelope for a newborn.

Tie 8 loops with garter stitch. This will be the bar.

The length of the plank should be 37 cm.For the first loop, knit 3 cm and make 5 loops every 7.5. cm. From the shoulder line 12.5 cm to the bevel.

The second bar is knitted in the same way.

The two planks will now be knitted together 2 sts at a time.

The length matches the back of the statement envelope.

Move to number 7 needles and knit 6 cm in garter stitch. Close the hinges.

Our newborn envelope blanket must have a hood.

It is knitted with knitting needles # 7. 6 cm garter stitch, 52 stitches. then knit with a pearl pattern, going to the needles number 8.

Sew the hood from the body of the envelope along the neckline.

A statement envelope is a necessary thing that is usually prepared in advance. Every mother wants her baby to be not only comfortably and warmly dressed on the first day of meeting grandparents. It is equally important that the envelope is beautiful. That is why we suggest that you knit an envelope for a newborn with knitting needles with your own hands in advance.

Knitted winter envelope for a newborn for discharge

The model is calculated for the age from 0 to 6 months.

We need:

yarn, 100% wool (100g by 300m) -500g;
circular knitting needles No 3.5;
Buttons to match the color of the yarn - 8 pieces;
markers.

Patterns:

elastic band 1 liter x1 life;
garter stitch: in all p. all loops - front;
pattern: see diagram:

Description

Front

We start knitting an envelope for newborns with our own hands with a set of knitting needles 122p. We carry out 4p. with a scarf pattern, then we sew on an elastic band. We knit with knitting needles 20p. and again we do 4p. shawl pattern. From the next p. winter envelope for statement knit like this :: 10p. scarf pattern, 102p. pattern, 10p. scarf pattern. We knit with a flat cloth 50cm.

Back

We mark the first row of the back with a marker. We continue knitting with an even cloth. In every 20th p. we provide holes for buttons on both sides in garter stitch areas. For the holes, close in 3p. in the center of the site, in the next. R. over them we collect 3p. We have 4 holes on each side. We continue knitting until we reach a height equal to the front. This is about 28r.

Hood

We continue knitting an envelope for newborns for discharge by another 15 cm.

Assembly

Fold the hood in half and sew open loops with a knitted stitch. We make a pompom with our own hands. How to do it - read the materials on our website. Sew on pom-pom and buttons. Lightly steam the bound envelope and dry.

Envelope for a newborn: video master class

Envelope for a newborn for discharge with a pattern "Snowflake"

The size for the child's height is 62cm.

We will need:

yarn with a wool content of at least 80% red (100g per 200m) - 300g;
red mohair yarn - 100g;
white yarn - 30g;
some green yarn;
knitting needles number 3.75;
hook number 3.

Patterns:

persons. smooth surface: in persons. ranks - persons., in. rows - purl;
pattern "Snowflake" - knit according to the scheme:

Density: 16p. for 20r. equal to 10cm by 10cm.

How to tie an envelope for a baby's discharge with your own hands

Front

We type with the needles 65p. yarn in two strands: woolen and mohair. We knit faces. ch. 4p. Then we add on each side to the faces. rows 9 times 1p. We get 83p. We continue to knit straight. At 27r. from the bottom we proceed to the "Snowflake" pattern. After 52r. from the bottom we reduce the loops: 1cr., * 1l., 2p. in 1l. * - from * to * repeat until the end of the river. The next 12p. need to be knitted with an even cloth. Then, for the armhole, close 1p on both sides. 5p., 3p. 1p. Remains 39p At 62cm from the bottom for rollout, close 9p. in the center and then we knit each part separately. For smooth rounding of the rollout along the inner edge, close 1p. 3p., 3p. 1p. 9p remains. Knit 3 rows and close shoulder p.

Back

This detail is knitted with knitting needles similar to the previous one, but without the "Snowflake" pattern.

Assembly and finishing

Fold in front and back with seamy sides to each other and connect, crocheting with single crochet posts. At the same time, we alternate the color of the threads:

1p .: red;

2p .: white;

3p: red.

Track. we perform the row with a crustacean step with red yarn. According to this description, we tie the rollout, armholes and shoulders.

On the shoulders from the side of the back, we knit two loops with white yarn. From the same yarn, you need to knit two buttons with your own hands: we close a chain of 4 air stitches into a ring and tie them with single crochet columns. Sew on the buttons opposite the loops. Lightly steam and dry the envelope.

Blue envelope

Size for ages from 0 to 6 months.

We have to:

yarn with a wool content of at least 50% (100g per 200m) - 400g;
knitting needles number 3;
hook number 3;
buttons - 16 pieces.

Patterns:

persons. Ch .: in persons. R. - facial p., In int. R. - purl;
out. Ch .: in persons. R. purl p., in. R. - facial p.;
shawl pattern: in all p. all loops are facial.

Density: on faces. ch. 20p. for 20 rubles. equal to 10cm by 10cm.

Description

Back

We type with knitting needles 21p. and knit persons. Ch., making additions on the sides in even p. 2 p. 3p., 4 p. 2p., 1 p. 1p. After that, in every 6th p. add 5 p. 1p. and in each 4 p. 1 time for 1p. Along with the additions of 16 cm from the bottom, we begin to knit out on the extreme 5 loops on the sides. smooth surface. At 36cm from the bottom, close the sides for 1p., Then in each 4 p. four times in 1p., and in the next. 2nd p. 1 time for 1p. At 45cm from the bottom for the raglan line, we close it on both sides in 2p., Then in every 2nd p. four times 2p. and 11 p. 1p. We close all p. 60 cm from the bottom.

Front

We collect 21p. and knit according to the description of the back. We knit a pattern in the center, alternating faces. and out. smooth surface - see photo. 18cm from the bottom on the side sections of the wear. ch. we begin to make the holes for the buttons. For this, without reaching 2p. to the edge, we knit 2p. in 1i., 1n. The rest of the holes are made at intervals of 5 cm. We knit raglan bevels 36 cm from the bottom. For them, knitting 5p. planks, subtract 1p. We do it like this: we knit 2p. in 1L. broach (remove 1p. front, knit 1l., stretch it through the removed one). At the end of the river. we knit 2p. in 1L., 5p. planks. We make such reductions in every 4p. four times, then in every even p. 18 times. Close 60cm from the bottom. NS.

Right sleeve

We dial 28p. and knit a 2cm shawl pattern. In the last p. evenly add p., bringing their number to 34 p. We turn to persons. Ch., adding 2p for the raglan line on both sides, then in each even p. four times 2p., 9 p. 1p. We continue to decrease on the right side in even p. 1p., and knit the left side straight. We carry out this algorithm until the loops run out. We break the thread, fix the end.

Left sleeve

We knit mirrored to the right.

Hood

We collect 20p., We knit faces. smooth surface. On the left side we add in each 8th p. 2 times for 1p., Then in every 10th p. 2 times 1p. At 16cm from the bottom, we collect 5p on the right side, then in each even p. 2 more times for 5p., 2 p. by 4p. We tied 22cm from the bottom to the middle of the hood. We knit the other half in a mirror. Sew back seams. Along the edge of the part, raise a p. And knit a 2cm shawl pattern. Close NS.

Bake raglan

We collect 6p., Knit with a scarf pattern. Close at 48cm NS.

Assembly

We sew the seam between the sleeves and the back, the seams on the sleeves, the seams between the front and back from sleeve to sleeve. Sew the binding to the open edges of the back on the sides and to the raglan of the sleeves in the front. Sew on the hood to the rollout. Sew on buttons.