Vest with an asymmetrical bottom line. Asymmetrical stylish vest

Asymmetrical tank top with a beautiful pattern.

This tank top will be the perfect base for stunning pairing ideas.

Dimensions: 36 / 38,40 / 42, 44/46 You will need: yarn (70% cotton, 30% sheep wool; 110 m / 50 g) -450 (500-550) g ​​blue; knitting needles number 5; circular knitting needles No. 5, 40 cm long.

Important: the front is shorter than the back.

Decorative decreases: from the right edge = chrome., 3 p. elastic bands, 2 persons. leave on the auxiliary knitting needle before work, knit 2 stitches together with the wrong one, knit 2 stitches together with the front knitting needle, return these 2 stitches to the left knitting needle and knit 1 stitches from the auxiliary knitting needle with the loop from the working knitting needle together with the front knit - 4 stitches C left edge = 2 p chrome.

Elastic: front row: chrome., 1 persons., * 2 out., 2 persons., from * repeat; purl row: knit loops according to the pattern.

Patent edge: front row: 3 persons.; out. row: remove 3 p. without knitting.

Crossed Loop Pattern: knit 60 p. according to the above pattern from arrow a to arrow f, while on plots a-b and e-f repeat from 1st to 24th p., on sections b-c and d-e repeat from 1st to 16th p., on average plot c-d repeat from 1st to 56th p. In the purl rows, knit the loops according to the pattern, the yarn overs - with the front ones, the purl loops - with them. crossed.

Knitting density(needles number 5): 21 p. x 25 p. = 10 x 10 cm, tied with an elastic band in a slightly stretched form.

Description of knitting.

Back: with a double thread, cast on crossed 130 (138-146) sts and knit 1 out. purl row. Continue the work with an elastic band. Through 16 cm = 40 p. from the typesetting row for bevels, on both sides, 1 decorative decrease = 122 (130-138) p. To continue bevels in each 24 (22-20th) p. perform on both sides 4 more times, 1 decorative decrease = 90 (98-106) p. After 56 (54.5-53) cm = 140 (136-132) p. from the dialing row close on both sides for armholes of 3 sts. = 84 (92-100) sts. After this decrease on the first and last 3 sts, perform the patent edge, as described above. Through 22.5 (24-25.5) cm = 56 (60-64) p. temporarily leave the loops from the beginning of the armholes.

Front: with a double thread, cast on crossed 130 (138-146) sts and knit 1 out. purl row. Then distribute the loops as follows: 35 (39-42) sts of elastic, 60 sts of a pattern with crossed loops, 35 (39-42) sts of elastic (start with 1 out., 2 persons. And finish with 2 out., 1 persons. and chrome.). Through 4 cm = 10 p. from the typesetting row, for bevels on both sides, 1 decorative decrease = 122 (130-138) p. To continue bevels in each 24 (22-20th) p. perform on both sides 4 more times for 1 decorative decrease = 90 (98-106) p. After 45 (43.5-42) cm = 112 (108-104) p. from the typesetting row of the loops for the armholes, close, as on the back, and then on both sides to carry out patent edges = 84 (92-100) p. Through 11.5 (13-14.5) cm = 28 (32-36) p. from the beginning of the armholes, the middle 22 (24-26) sts. for the neck, temporarily leave and first finish the right side. To round off the neckline, close from the inner edge in every 2nd p. 5 (6-7) times 1 p. After 22.5 (24-25.5) cm = 56 (60-64) p. from the beginning of the armhole, temporarily leave the remaining 26 (28-30) sts of the shoulder. Finish the other side symmetrically.

Assembly: Sew shoulder seams. Execute side seams, while the lower sections for the incisions are left open (front 5 cm long, back 18 cm long). For the neck tape, the left 22 (24-26) sts of the front neck and 32 (36-40) sts of the back neck should be transferred to circular knitting needles, between these loops at the edges, dial 25 (24-23) sts. = 104 (108- 112) p. Knit in a circle 6 p. with an elastic band, for this, alternately knit 2 persons., 2 out., then close all the loops with a double thread, as with purl knitting.

Dimensions: 36/38 (40/42) 44/46

You will need: yarn (100% cotton; 90 m / 50 g) - 450 (500) 550 g turquoise printed; knitting needles No. 4,5 and 5; circular needles No. 4.5; 5 buttons (diameter 44 mm).

Pattern 1:(needles No. 4.5) elastic (odd number of loops). Front rows: edging, alternately 1 front, 1 purl, finish 1 front, edge. Purl rows: knit loops according to the pattern. Circular

ranks: alternately 1 front, 1 purl.

Knit the following patterns with needles number 5.

Pattern 2: purl = front rows - purl loops, purl rows - front loops.

Pattern 3: front stitch = front rows - front loops, purl rows - purl loops.

Pattern 4: openwork pattern (even number of loops). 1st row: edging, * 2 knit loops together front, 1 yarn, from * constantly repeat, edging. 2nd and 4th rows: knit loops and yarns with purl. 3rd row: cro-

loops, 1 front, * 2 loops knit together front, 1 yarn, from * constantly repeat, 1 front, edge.

Repeat rows 1-4 continuously.

Pattern 5: woven pattern (even number of loops). Front rows: edge, * 1 purl, remove 1 loop as purl, while pulling the thread in front of the loop, from * constantly repeat, edge. Purl rows: knit loops according to the pattern, knit removed loops with purl.

Sequence of patterns:* 2 rows with pattern 2, 2 rows with pattern 3, 2 rows with pattern 2, 6 rows with pattern 4, 2 rows with pattern 2, 2 rows with pattern 3, 2 rows with pattern 2, 10 rows with pattern 5, from * constantly repeat = 28 rows of rapport.

Knitting density: sequence of patterns - 17.5 p. x 28 p. = 10 x 10 cm; plank - 6 p. + 1 edge = 2.5 cm.

Back: cast on needles 82 (90) 96 loops cross set and for the plank tie 4 cm with pattern 1. Continue work acc. sequence of patterns. After 52 cm = 146 rows (54 cm = 152 rows) 56.5 cm = 158 rows from the plank, close all loops, while the middle 28 (30) 32 sts form the neck, the outer 27 (30) 32 sts - the shoulders ...

Left shelf: cast on the needles 82 (86) 90 loops with a cross-shaped set and for the strap tie 4 cm with pattern 1. Then, on the first 74 (78) 82 loops after the edging, continue to work acc. The sequence of patterns, for the plank, continue to work on the remaining 6 loops + edge pattern 1. Attention: pattern 5 in the front rows after the edge with an even number of loops, start removing 1 loop as purl, with an odd number of loops, start with 1 purl, so that in front of the plank finish pattern 1 purl. At the same time, for an asymmetric shape, subtract along the right edge in each 2nd row from the plank 37 (37) 38 x 1 p. = 45 (49) 52 p. After 40 cm = 112 rows (42 cm = 118 rows) 44.5 cm = 124 rows from the plank, leave 1 x 13 (14) 15 sts for the neckline along the left edge, then close 5 x 1 sts in each 2nd row. At the height of the back, close the remaining 27 (30) 32 sts of the shoulder.

Right shelf: knit in the same way as the left shelf, but in a mirror image and with holes for buttons. To do this, after the initial row, start the plank with an edge and 1 purl, pattern 5 constantly start with 1 purl. For the holes for the buttons, knit the 3rd and 4th loops of the strap together, respectively, and make 1 yarn over; knit this yarn in the purl row with the purl. Make the 1st hole for the button every 18.5 cm = 52 rows (20.5 cm = 58 rows) 23 cm = 64 rows from the initial row, the next 3 should be made with an interval of 5.5 cm = 16 rows.

Assembly: perform shoulder seams. Cast on the circular knitting needles left 13 (14) 15 loops of the right shelf, cast on 23 loops along the rounded edge, 29 (31) 33 loops along the edge of the back neckline and 23 loops along the rounded edge of the left shelf, add the remaining 13 (14 ) 15 loops. For the strap, knit on all 101 (105) 109 loops with pattern 1, while starting with purl 1 and continue pattern 1 of the straps of the shelves, include the loops between them in the pattern. In the 2nd row, make another hole for the button above the previous holes. With a plank width of 3 cm = 5 rows, close all loops according to the pattern. Cast on circular knitting needles on the upper 21.5 cm = 60 rows (23.5 cm = 66 rows) 25.5 cm = 72 rows of the side edges of the back and shelves 45 (53) 61 loops and for the sleeve strips knit 3 cm = 5 rows in pattern 1, starting with purl 1. Then close the loops according to the pattern. Run the seams of the sleeve strips and the side seams between ** on the pattern, while below the sleeve strip, the first stripes of pattern 5 and 4, respectively, match exactly, after which the patterns are displaced due to the beveled edge of the shelf; when making the side seams, it should be slightly stretched. The bottom 13 cm of the side edges of the shelf and planks hang down in asymmetrical corners. Sew on buttons.

Fashionable model of a free asymmetric vest for women with a free knitting description.

You will need: 400 (450) 500 grams of light gray yarn, consisting of 55% natural wool, 45% polyamide; thread length 125 meters in 50 grams; knitting needles number 6; circular needles number 5; 2 buttons with a diameter of 20 mm; 2 gray buttons.

Asymmetric vest sizes: 38-40 (42, 44-46).

Pattern 1: patent edge (for 2 loops) = in the front rows, remove the 2 edging as purl, while tightening the thread tightly before work; in the purl rows, knit the loops with the front ones.

Pattern 2: mesh patent pattern (even number of loops). Start and finish each row with 2 stitches in pattern 1.

1st row (= purl row): * 1 loop with 1 crochet, remove as purl, 1 front, from * constantly repeat;

2nd row (= front row): * 2 front, remove the yarn, like a purl, thread at work, from * constantly repeat;

3rd row (= purl row): * 1 loop with a crochet knit together with the front one, remove 1 loop with 1 crochet, like a purl, from * constantly repeat;

4th row (= front row): * 1 front, remove the yarn as purl, thread at work, 1 front, from * constantly repeat;

5th row (= purl row): * 1 loop with 1 crochet, remove as purl, knit the next loop with crochet together with the front one, from * constantly repeat.

Run 1-5 rows 1 time, then constantly repeat 2-5 rows.

Density of knitting asymmetric vest: 11 sts x 28 rows equals 10 x 10 cm.

Description of knitting an asymmetric vest

Back: Cast on 64 (68, 72) sts and knit 1 row.

After 30 cm or 84 rows from the initial row, add 1 loop to expand the sleeves on both sides 1 time, then in each 4th row 11 times 1 loop (in each 4th row 9 times 1 loop and in every 6th row 2 times 1 loop; in every 4th row 7 times 1 loop and in every 6th row 4 times 1 loop) according to the pattern after or before pattern 1, respectively = 88 (92, 96) loops.

After 47 cm or 132 rows (48.5 cm or 136 rows, 50 cm or 140 rows) from the initial row, close for the shoulder bevel on both sides 1 time 1 loop, then in each 2nd row 11 times 1 loop and 8 times 2 loops (9 times 1 loop and 10 times 2 loops; 7 times 1 loop and 12 times 2 loops), while from the beginning of the shoulder bevel knit without a pattern 1.

After 61.5 cm or 172 rows (63 cm or 176 rows; 64.5 cm or 180 rows) from the initial row, close the last 2 shoulder loops and leave the middle 28 loops for the neckline.

Left Front: Cast on 28 (30, 32) sts and knit 1 row.

Then, starting with purl 1, knit with pattern 2.

At the same time, for an asymmetric shape, knit along the left edge in front of pattern 1 alternately in each 8th and 10th row from the initial row 18 times 1 front crossed from a transverse thread and include in the pattern.

At the same time, expand the sleeve and the shoulder bevel along the right edge, as on the back, while from the beginning of the shoulder bevel along the right edge, knit without a pattern 1.

At back height, close the last 2 shoulder loops and leave the remaining 28 loops for the neckline.

Right shelf: knit in the same way as the left shelf, but in a mirror image.

Assembly: perform shoulder seams.

For the collar, cast on the circular knitting needles the left 84 neck loops and knit with pattern 2, while knitting the edge in the shoulder area with the previous or next loop together with the front one = 80 p.

After 6 cm from the beginning of the knitting of the collar, close all the loops, like the front ones.

Sew side seams.

Weave bunches of fringe from two threads 12 cm long with an interval of 1 cm into the edge of the armholes, collar, side of the shelves and into the bottom edge.

Sew the buttons on the wrong side of the right shelf and on the front side of the left shelf as follows: sew the first button directly at the edge of the shelf edge 10 cm below the closed edge of the collar, the second at the same height at a distance of 12 cm from the first.

From the front side, sew both buttons on the buttons of the right shelf.

Knitted cardigan Augusta.

An oversized cardigan with raglan sleeves and wide sides is knitted with a braid pattern. A jacket with 6 buttons is fastened.

The size: 44/46

You need: 13 skeins of Pingouin Familia yarn (100% acrylic, 106m / 40g, color 805) gray;

Needles number 4.5;

6 buttons

Patterns:

Elastic band 1 x 1: alternately 1 person., 1 out.

Front surface: persons. R. - persons. n., out. R. - out. NS.

Seamy surface: persons. R. - out. n., out. R. - persons. NS.

Fantasy pattern 1: knit by Scheme 1

Fantasy pattern 2: knit by Scheme 2

Density of knitting, front surface: 19 p. And 25 p. = 10 x 10 cm

Knitting description

Back: on the needles, dial 112 sts and knit 6 cm with an elastic band 1 x 1, evenly adding in the last p. 18 sts. Continue knitting as follows: (18 sts with fancy stitch 1, 10 sts with fancy stitch 2) 4 times and 18 sts with fancy stitch 1. At a height of 40 cm from the beginning of knitting for raglan, subtract both sides in every 2nd R. 24 times 2 sts each. Decreases to perform at a distance of 3 sts from the edge, knitting these 3 sts with the front ones. At a height of 60 cm from the beginning of knitting, p. Close according to the pattern.

Right shelf: on the needles, dial 78 sts and knit 6 cm with an elastic band 1 x 1, in the last p. adding evenly 14 sts. Continue knitting as follows: (2 sts with front satin stitch, 2 sts. purl stitch) 2 times, (10 points with a fantasy pattern 2, 18 points with a fantasy pattern 1) 3 times. At the same time, at a height of 30 cm from the beginning of knitting, make holes for the buttons (2 points together, crochet), the first - at a distance of 4 points from the right edge, the second - 34 points from the first hole. Make 2 more pairs of button holes at a distance of 12 cm from the previous ones. Simultaneously, at a height of 40 cm from the beginning of knitting for raglan, subtract both sides in each 2nd p. 24 times 2 sts each. Decreases to perform at a distance of 3 sts from the edge, knitting these 3 sts with the front ones. At a height of 57 cm from the beginning of knitting to cut the neckline, close with right side in every 2nd p. 22 sts, 10 sts, 6 sts and 2 times 2 sts each. At a height of 60 cm from the beginning of knitting, close stitches according to the pattern.

Left shelf: knit symmetrically to the right, but without the holes for the buttons.

Sleeves: on the needles, dial 78 sts and knit 6 cm with an elastic band 1 x 1, in the last p. adding 4 sts evenly.Continue to knit as follows: (2 sts with front stitch, 2 sts with purl stitch) 2 times, (10 sts with fancy stitch 2, 18 sts with fancy stitch 1) 2 times, 10 sts with fancy stitch 1 , (2 sts with front stitch, 2 sts with purl stitch) 2 times. Simultaneously add on both sides in each 18th p. 4 times 1 p. At a height of 40 cm from the beginning of knitting for raglan, subtract on both sides in every 2nd p. alternately 2 sts and 1 sts each, until 22 sts remain on the needles. Close the remaining sts according to the figure.

Collar: on the needles, dial 160 p. and knit with an elastic band 1 x 1. At a height of 4 cm from the beginning of knitting, close on both sides in each 2nd p. 22 sts, 10 sts, 6 sts and 2 times 2 sts each. Close the remaining sts according to the figure.

Assembly and finishing: perform ragged seams. Sew side and sleeve seams. Sew the collar to the neckline with an invisible seam. Sew buttons to the left shelf.

Description of knitting and sizes for patterns

Comfortable plaid vest with short sleeve Draws attention to the asymmetric clasp. Perfect for any shape.

Dimensions: 42/44 (46/48) 50/52.

You will need: yarn 1 (100% sheep wool; 90 m / 50 g) - 500 (550) 600 g of white and 300 (350) 350 g each of black and burgundy; yarn 2 (100% polyamide; 155 m / 50 g) - 100 g black; knitting needles No. 4.5; circular needles No. 4; hook number 4; 1 black button; black trimmed brooch with a diameter of 32 mm.

Main pattern: the number of loops is a multiple of 4 + 2 + 2 edging. Knit according to the above scheme. The diagram shows only the front rows. In purl rows, knit all loops with purl. Start with 1 edge, repeat the rapport constantly, end with loops after the rapport and 1 edge. In height, constantly repeat the 1st-4th p.

Alternating stripes with woolen thread: 2 p. * black, white, burgundy and white, from * constantly repeating.

Knitting density: 22 p.x 29.5 rubles = 10 x 10 cm.

Back: with black thread of woolen yarn, dial 136 (144) 152 sts and knit with the main pattern with alternating stripes. For whole-knitted sleeves through 47.5 cm = 140 p. (46 cm = 136 p.) 44.5 cm = 132 p. from the typesetting row on both sides add 1 x 2 p., then in each 4th p. add 14 (15) 16 x 2 p., immediately knit the added loops in the desired color and include in the pattern = 196 (208) 220 p. For shoulder bevels after 68 cm = 200 r. from the dial-up row close 1 x 4 p., then close in each 2nd p. 13 x 4 p. (11 x 4 p. And 2 x 6 p.) 8 x 4 p. And 5 x 6 p. Simultaneously for the neckline through 72.5 cm = 214 p. close the middle 52 points from the dial-up row and finish both sides separately. To round the cutout along the inner edge in every 2nd p. close 6 x 2 p. Through 77.5 cm = 228 p. from the dial-up row close the remaining 4 (6) 6 p. shoulders on both sides.

Burlap pocket (2 parts): dial 40 stitches with black woolen thread and knit 15 cm with front satin stitch. Then leave the loops temporarily.

Left shelf: dial 102 (106) 110 stitches with black woolen thread and knit with the main pattern with alternating stripes, while repeating the rapport between the edge ones. To enter the pocket after 24.5 cm = 72 p. postpone the first 40 stitches from the typesetting row, instead of them include 40 deferred burlap loops in the work and include these loops in the pattern. Perform a one-piece sleeve along the right edge, as on the back = 132 (138) 144 p. Shoulder bevel on the right edge, also perform as on the back. At the same time, for a neckline cut through 72.5 cm = 214 p. from the typesetting row on the left edge, close 1 x 60 p., then in each 2nd p. close 6 x 2 sts. Close the remaining 4 (6) 6 sts of the shoulder at the height of the back.

Right shelf: knit symmetrically to the left.

Assembly: the deferred loops of the entrance to the pocket on the shelves, reshoot on the working knitting needles and knit with a black woolen thread 2 r. front satin stitch, then set the loops aside. From the seamy side along the set 40 points of the entrance to the pocket, dial another 40 points with a black thread and knit in the same way. Then knit the loops from both knitting needles together and close them tightly at the same time. Sew the burlap from the inside to the shelves. Sew shoulder seams. For a collar along the neckline with polyamide black thread on circular knitting needles, dial 206 stitches and knit with garter stitch, while on both sides in each 2nd p. close 20 x 2 p. After 11 cm = 42 p. from the beginning of the collar close the remaining 126 p. Sew side seams. By side edge the collar of the left shelf with black woolen thread, sew a hinged loop for a button in the form of a chain of 12 ch. Sew a button on the inside of the right shelf in the appropriate place. Place the right shelf on the left and pin the gimped brooch.