We knit takes from melange yarn. Beret with embossed stripes

Knitted beret today again at the peak of popularity. There are many options for implementation: from delicate to voluminous, from classic, laconic to flirty. Knitting a beret is quite an exciting activity that does not require much experience. In this article we will tell you how to knit the pattern and description represent different patterns.

"Gerda", patterns and description of different sizes of hats

Sizes: S / M (M / L). The height of the finished hat is 24cm.

We need:

yarn (65% wool, 35% alpaca) 50g by 75m;
set of hosiery cn. # 5;
circular cn. No5, length 40cm;
circular cn. No 3.5.

Patterns:

Knitting density: 17p. for 26 rubles. on the relief drawing correspond to a square of 10 cm by 10 cm.

Description - how to knit a beret

Knitting pattern of the Gerda model - from bottom to top.

We collect 84 (96) p. on cn. No 3.5 and knit with our own hands round 10 rubles. rubber bands. And we start it with 3 out. NS.

Track. p .: * 3i., 1l., 1n., 1l., 1n., 2l., 1i., 2l., 1n., 1l., 1n., 1l. * - repeat from * to * to the end of the row. We have 112 (128) p. We pass to cn. # 5.

Track. p.: * 3i., relief - see the diagram (yarn over. knit faces. p. for the lower lobules) * - repeat from * to * on all p. rows (these are 7 (8) rapports). When the number of loops in the work decreases, we go to hosiery cn. Having knitted the rapport in height - 42 (48) p., In the next. R. make deductions. The scheme is as follows: every 3 life. we knit the elastic bands in 1 life. We have 28 (32) p. In the next. R. every 2 persons. n. we knit in 1 person. p. We have 14 (16) p. We break off the thread, crochet it through the remaining loops, pull it together, bring it to the wrong side and fix it.

Fashionable beret-hat with a big braid: video mk

Beret with knitting needles from boucle yarn, description

Women's bouclé hats are spectacular and warm at the same time. These types of hats are suitable for winter weather and early spring. Knit simply - knitting or crocheting. This model is in size 56.

We need:

boucle yarn - 90g;
set of hosiery cn. # 5;
markers (M).

Patterns: front stitch - in circular knitting, all stitches are front.

Description and diagrams - how to tie a beret

First, you need to knit a sample from the selected yarn for the hats of the faces with your own hands. satin stitch. Determine the density of the knit. According to the pattern, calculate the required number of loops.

We collect the required number of loops. It should be divisible by 6, but if, according to calculations, this did not work out, round to the nearest side to a multiple of six, better - to a larger one. Go to circular knitting, distributing the loops for 4 SP. Knit one row, setting M at the dividing line over six gussets.

We continue to knit hats for women with our own hands, making increments in every 4th p.: In each of the wedges, 1p. Having received 6 cm of height, we stop the increments. Next, we knit with knitting needles, knit exactly 2 cm more. Now we will make reductions, mirror-like increases: in every 4th p. in the area of height up to 8cm. Then we make the same reductions in every 2nd p. Having knitted to the desired height, we break off the thread, thread it through the remaining loops, tighten it, crochet it to the wrong side and fasten it.

When working, it is advisable to compare women's hats with a pattern, if necessary, adjust the decrease / increase.

At the bottom of the hats for women, crochet the rim with single crochet columns. Its height is about 5cm.

Beretic with braids "Starr": video master class for beginners

Volumetric knitting, description

Model of hats for women with a head circumference of 54 / 56cm.

To knit a hat, we need:

yarn, 55% wool (50g by 70m) - 150g;
sets of hosiery cn. # 5 and # 6;
auxiliary cn .;
markers.

Patterns:

shawl ch .: when knitting round, alternate 1p. facial with 1p. worn out. NS.;
persons. smooth surface: when knitting round - only face.p .;
main pattern:
from 1st to 4th p .: faces. ch .;
5p.: * 8l., 1 open lump from 6 p. (On 6 p. With the help of the auxiliary knitting needle we knit 8p. Faces. Ch., Return p. To the right cn.) * - repeat from * to * for all items;
from the 6th to the 9th p .: persons. ch .;
10r .: * 1l., 1 open lump, 7 faces. (the bumps move) * - repeat from * to * for all p.
We repeat from the 1st to the 10th p.

Knitting density: with needles No. 6 in the main figure 14.5p by 21p. correspond to a square of 10cm by 10cm.

We knit a volumetric beret with knitting needles

We start knitting a hat with a set of cn. No5 78p. Having knitted 4cm scarf with your own hands. pattern, go to cn. # 6. We proceed to the main drawing, in the first p. we make a uniform increase of 34p. We get 112p. After completing 30r. - see patterns with cones, go to faces. ch.

Now we will make the deductions. The scheme is as follows: we mark with a marker every 14th point and in the next. R. we knit each marked and previous item in 1p. Next, we perform reductions in each row. When there are 8 sts left, we break the thread, thread it through the loops, tighten it, crochet it on the wrong side, fasten it.

We tie the bottom of the cap and the 1st p. the main pattern is crocheted with a single crochet.

Volumetric beret: video master class

Summer openwork knitting needles for women with their own hands, description

This type of hat is for a woman with a head volume of 53.5 cm.

For this openwork beret we need:

yarn (100g per 274m) - 100g;
circular cn. length 40cm # 3.75 and # 4;
hook number 4.

Patterns and description of technique:

elastic band 2 faces.x2izan .;

2PL - 2p. together to the left: knit two stitches in one person. in the usual way;

2PP - 2P. together to the right: swap the second and first bn. on the left cn. and knit them in 1 persons.

We knit a summer openwork beret

We collect cn. No 3.75 96p. and go to circular knitting. By tying 5p. persons., go to the elastic band.

Having knitted 12 rubles with our own hands, we change the patterns:

track. row: * 2l., from 1p. -2 persons. * -Repeat from * to * for the whole row. We have 144p .;
track. p .: faces.

Repeat from 1st to 10th p. schemes 5 times. Then we make subtractions:

1p .: * 4i., 2PP, 4y., 2PL, 4i. * - repeat from * to *;

2p .: * 3i., 2PP, 4l., 2PL, 3i. * - repeat from * to *;

3p .: * 3i., 6l., 3i. * - repeat from * to *;

4p .: * 2i., 2PP, 4l., 2PL, 2i. * - repeat from * to *;

5r.: * 2i., 2PP, 2l., 2PL, 2i. * - repeat from * to *;

6p .: * 1i., 2PP, 2l., 2PL, 1i. * - repeat from * to *;

7p .: * 1i., 4l., 1i. * - we duplicate from * to *;

8r.: * 2PP, 2L., 2PL * - duplicate from * to *

9p .: * 1l., 2PP, 1l. * - duplicate from * to *;

10r .: * 2PP, 1l. * - duplicate from * to *;

11r .: * 2 PP * - duplicate from * to *. We have 9p.

Break the thread, thread through the remaining loops, tighten, crochet to the wrong side, fasten.

Do-it-yourself openwork beret for women is ready!

Selection of schemes

The article provides descriptions and patterns for knitting berets.

With the onset of cold, cloudy and windy days, you want to wear warm knitted clothes. If you know how to knit, you will always find something to do in the evenings: for each season, needlewomen have a whole list of obligatory knitted items, which is constantly updated. After all, the already familiar models are being replaced by new ones, using fashionable and beautiful patterns.

In this article, you will learn how to tie one of the permanent companions of elegant women in the cold season - beret. You will be able to tie and simple model knitted with ordinary hosiery, and openwork.

If you have knitting skills on the highest level, then for you - a pattern of a beret knitted with a braid or braid pattern. Follow step by step descriptions, and you will end up with an original headdress that cannot be found in stores.

How to knit a voluminous beret for a woman?

Voluminous berets, it seems, are not inferior to their positions this season: in addition to being very warm in them, they look better and more interesting than small hats and berets tied with garter stitch.

With the help of such a beret, it is easy to create both a classic look and a shocking one. An experienced knitter will master the presented scheme of knitting a volumetric beret on straight knitting needles, because there are quite complex elements here.

What you need to prepare for knitting a voluminous beret:

100% mohair yarn (150 gr)
straight knitting needles # 7 and an additional knitting needle
cut out cardboard circles for making a pompom
scissors and a darning needle

Bulky headdress knitted

We will knit in several stages. Let's start by knitting the top of the beret. Then we will tie the binding. Let's make a pompom and put everything into a stylish headdress.

As we already said, we will knit from the top of the headdress. We cast on the needles 91 loops and knit the canvas with a regular elastic band 1/2.
The pattern of the elastic is as follows: 1 front loop / 2 purl.
After we knit 23 cm from the typesetting edge, we will reduce the number of loops. To do this, reduce the first row evenly by 30 loops at once. We should have 61 loops on the needles. We will knit again with an elastic band according to the same pattern.
We knit 3 centimeters and in the next row we begin again to decrease by 30 loops. We should end up with 31 loops, which we knit with an elastic band until we reach 28 cm of the height of the top of the beret. We tighten open loops.
The knitting density should be as follows: 18 rows of 13 loops are equal to a square with a side of 10 cm.

Knitting inlay

On the same knitting needles we cast on 11 loops. We knit a pattern according to the following scheme:

Row 1-2:

1 out., 9 persons., 1 out.

Row 4:

P1, K3 ... Remove 3 sts using extra knitting needle before work. The next 3 loops are knit stitches, removed also knit stitches. The last loop of this row is the front loop.

Rows 5 and 6:

1 out., 9 persons., 1 out.

Rows 7 and 8:

P1, K3 ... Remove 3 sts using extra knitting needle before work. The next 3 loops are knit stitches, removed also knit stitches. Last loops we knit like this: 3 - facial and 1 purl.

If you want to knit a pink beret with a braid pattern, then knit according to the described pattern until the length of the inlay is 56 cm (this is the circumference of the head). Close 11 stitches and you will have a harness binding.

Pink beret with textured braids

To make a pom-pom, you will need two cardboard circles (diameter - 11.5 cm). In them, you need to cut circles of a slightly smaller diameter (1/3 of the diameter of the larger circle).
Between the circles we will expand the thread folded in half, with which we will pull together the pompom.

The pom-pom can be made variegated from multi-colored threads. we wind yarn on the cut cardboard blanks, filling the entire circle evenly.
Let's walk with scissors along the top of the wound threads, pushing the edges of the cardboard blanks.
We pull together with a doubled thread and carefully pull out the cardboard circles. If necessary, cut off the stray threads with scissors.

Parts collection:

In order for all the details to come together in one headdress, we need to sew a seam on the top of the beret and sew on the smaller edge of the tape.
We connect the inlay with a seam to the bottom of the upper part. In doing so, we perform a small assembly.
After all the details of the beret are sewn on, add a pompom.
It remains to moisten the finished hat and wait until it dries.

From the video you will learn one of the ways to quickly and simple knitting beret.

Video: knitting knitted beret

Another way to knit a bulky beret:

Bulky beret

How to knit takes from mohair with knitting needles: a diagram with a description?

A classic headdress in the cold season - this takes from mohair.

Bind volumetric model interesting texture, then the hairstyle will not lose its splendor during the time spent on the road to work. Dilute the look with a scarf in a contrasting color and you will look stylish.

For work we need:

3 skeins of turquoise yarn (1: 1 acrylic and mohair)
stocking needles № 3
circular knitting needles length 40 cm
bobbin elastic
needle

Here detailed description how to tie takes:

Pink beret from mohair

Gentle mohair beret and scarf: diagram and description

The description of mohair beret

How to knit Gerd's knitting needles: a diagram with a description?

Needlewomen who are fond of knitting have long appreciated the beauty and convenience beret "Gerda"... Many craftswomen are very fond of this designer model and use the pattern to knit other things, as well as to create whole sets for cold winter days.

A feature of this model is the ornate embossed pattern that adorns the beret. How to knit such a wonderful headdress, you will learn from the patterns and descriptions below.

Fashionistas will certainly appreciate the textured knit. The flat beanie, which has survived a long history, epitomizes Parisian chic and elegance.

If you have any questions or something from the description is not clear, then watch the video, which tells about the technology of knitting a beret.

Video: Gerda takes - knitting

How to knit a beret with leaves with knitting needles: a diagram with a description?

An elegant burgundy beret is knitted with circular and toe knitting needles No. 3. For work, you will also need a hook No. 4. The beret is decorated with beads. It will need about 50 grams.

Burgundy beret knitted with an openwork flower pattern

It is necessary to start knitting a beret with the "Braids" pattern, which will then turn into stylized large leaves.

Below is a diagram and a description of the work:

To knit a mélange beret, you will need:

200 g melange yarn
toe needles number 4

The elastic is performed according to the following scheme: 1 person. n. and 1 n. NS.

Main pattern diagram:

When performing a pattern in the purl rows, knit all the loops with the purl.

We cast on 90 loops and knit with an elastic band 5 cm.To make a hem, we perform 1 row like this:

* 2 knit with front knit and make a yarn *. We knit 5 cm with the "elastic" pattern, we knit yarns with purl stitch.
Now we start knitting the main pattern. We make uniform additions in 1 row. We need to add 54 loops.
We will decrease these loops according to the scheme.
After 12 loops remain on the needles, cut the thread and tightening its ends, fasten.

How to knit takes with braids with knitting needles: a diagram with a description?

Scheme and description of a white beret, knitted with a "Braid" pattern:

To knit such a "sunny" beret, you need bright yellow yarn. The schematic and detailed description is given below.

Takes the "Sun"

Knitting patterns, you can use others:

Cage pattern

Pattern of the "Cage" pattern

Beret tied with a "braid" pattern

Beret knitted with a "braids" pattern

How to knit takes a braid with knitting needles: a diagram with a description

The beret, knitted, always looks very impressive and always fashionable. embossed pattern"network". Here diagram and description:

Beret knitted with a braid pattern

Video: knitting pattern

How to knit a summer openwork beret with knitting needles: a diagram with a description?

Summer openwork beret is knitted according to the napkin principle: the beginning is in the center, and then additions are made in each row. You need to knit a beret on 5 knitting needles.

Below is a diagram and description of an openwork beret.

Video: how to tie a summer beret?

How to connect the beret with the motives "heart": a diagram with a description?

Beret with a heart pattern

The description of beret

How to knit with knitting needles in garter stitch: a diagram with a description?

If you like the classics more, then knit a beret with a garter stitch. Even the needlewoman who takes her first steps in knitting can knit it.

What you need to cook:

1 skein of milky yarn
red yarn (remnants from the previous knitting)
knitting needles
the hook with which we will connect the back seam of the headdress

We start with a set of 110 stitches.

1st row: face loops
2nd row: elastic band from 2 facial and 2 purl
Then we knit the purl row in accordance with the resulting pattern.
Knit again with an elastic band 5 cm
We finish the elastic with purl loops, at the same time making additions to it 28 loops
To get an additional loop, we need to make a yarn between the front loops.
After that, we proceed to the garter knitting. Here's a diagram:

As you can see from the diagram, the front and back loops are knitted with the front
The knitted garter stitching fabric will turn out to be quite dense. This is just right for a winter beret.
We continue to knit with a garter stitch of 11 cm or a little more (at your discretion)

11 cm garter stitch

The knitting pattern of these 11 cm is as follows:

22 rows - milky yarn color
4 rows - red
2 rows - milk
2 rows - red
8 rows - milk

Now let's make reductions: divide the canvas into 6 parts, each with 23 loops. We will tie the threads at the dividing points so as not to get lost.

1st row: we knit the front row, in which we knit the first 2 loops with one front one,
after that we also knit every 2 loops to the indicated thread,
after the thread - one facial. We will knit the remaining 2 knit ones as one knit.

The row after that was reduced by 12 loops
2nd row and 3rd we knit a row with a "garter stitch" pattern
We do not subtract
4th row: we repeat in the same way as in the first row with decreases, we make a reduction by 12 loops
5th row and 6th row: garter stitch without subtraction
7th to the end of mating and - decrease by 12 loops

We knit the purl rows without reducing the number of loops.

We drop the remaining nine loops onto a thread and tie. Sew the side seam

After there are 18 loops on the needles, we will make a decrease in half: we knit every two knit stitches - with one loop
We have 10 loops left that need to be dropped on a thread (it's easier to do this with a crochet) and tie
Sew the back seam (the hook will come in handy again) with milky yarn
Video: knitting (last part)

How to knit a Nako beret (Nako) with knitting needles: a diagram with a description?

When you knit Nako's beret with knitting needles according to the pattern, do not tighten the threads too much, and take not thin knitting needles, otherwise the headdress will only fit the doll.

The knitting pattern is as follows:
- We cast on 16 loops.
- Getting started knitting 1 row... we use the following combination: we knit 3 out.loops.
- Then we knit 8 knit stitches(we form a braid), 3 out., we knit 1 loop with the front knit, make a yarn over, and finish with the front loop.
- 2nd row: knit purl in accordance with the picture.
- 3rd row knits like the 1st, only the last will be 2 front loops, instead of 1.
- Then everything is repeated: 5th row and remaining unpaired up to the 11th row we knit similarly to the 1st row, with the only difference that in 5th add at the end of 3 front loops, in 7th- the last to knit 4 facial loops, in 9th row- the last 5 knit stitches are added, in the 11th - 6 knit stitches.
Crossing pigtails every 12 rows
- We start to knit 12th row We knit 3 purl stitches, 8 knit stitches, cross 4x4,3 purl stitches, knit 1 knit stitch, make 1 yarn and finish with 7 knit stitches.
- In each 12th row do the crossing of the pigtails. When the desired height of the beret is typed, we will knit an elastic band from the edge loops of the pigtail. We will sew a ready-made headdress.
When the triangle is of 14 loops, we begin to decrease
- Change the direction of the braids. Having knitted the first 4 loops, using an additional knitting needle, we transfer them to the place of the other 4 loops. We knit the next 4 loops, and then we knit 4 loops, removing from the additional knitting needle.
- We have formed a triangle of 14 loops. There should be 6 triangles on the entire canvas. It is necessary to make decreases after the 14th loop. Thus, we will make a small triangle out of a large one.
- In the large triangle, we subtract the loops, and in the small one we add.
The beret consists of 6 triangles

How to cross stitches in every 12th row?
- We knit all front rows with decreases in the 1st loop after the crochet, in other words, we knit the 2nd loops together and turn the work.
- We do not knit the remaining loops, leaving them on the needles. So our big triangle becomes smaller, and in the small one the loops are added.
Video: how to knit a beret with wedges with classic knitting needles?

Yarn (80% merino wool, 20% alpaca; 115 m / 50 g) - 100 gray mottled; circle. knitting needles No. 4.5, 40 cm long, a set of knitting needles No. 4.5.

Patterns

Elastic

Knit alternately 1 person., 1 out.

Purl surface

In circular rows, knit all loops with purl.

Front surface

In circular rows, knit all loops with the front ones.

Striped pattern

Knit in a circle = 1st p.: * Remove 1 p. With 1 yarn, as with wear. knitting, 10 p. stitch, from * constantly repeat.

2nd p.: * Knit 1 p. With 1 yarn together persons., 10 p. Persons. stitch, from * constantly repeat.

Repeat the 1st and 2nd p.

Knitting density

19 p.x 26 p. = 10 x 10 cm.

Completing of the work

Cast on 86 stitches on circular knitting needles, close them in a ring and knit 5 cm = 15 p. rubber band. In the 16th p. evenly add 79 p. = 165 p.

In the 42nd p. = 16 cm from the beginning of the pattern in the strip, constantly knit the last and first 2 p. Strips of wear. smooth together out. = 135 p. Perform the same reductions in every 2nd p. 3 more x = 45 sts. If necessary, switch to stocking needles.

In the next 2nd p. knit the remaining 2 out. loops together out. = 30 p.

In the next row, knit loops according to the pattern.

Then knit 2 sts together, until 5 sts remain on the needles.

Knit 5 more p. On these 5 sts. persons. satin stitch, then stretch the end of the thread through these 5 sts and tighten them.

Knitted hat and cape, with a volumetric braid pattern in a new version, represent a wonderful fashionable set for winter.

You need: for a cape 400 (450) 500 g; for a hat 100 g; Knitting needles # 7, circular needles # 7 (2 pairs): fur pompom.

Head circumference: 55-58 cm.Cape sizes: 36-40 (42-46)

The decoration of this simple headband - false braids that can be knitted from yarn of a different color or shade. After reviewing this a master class on knitting a headband with false braids, you can perform such decor on any other thing, for example, on a hat, scarf, sweater cuffs, etc. Knitted fabric with intertwined braids it is springy like an elastic band, so the headband fits well to the head and does not stretch when worn. The back seam of the bandage is practically invisible, and where the braid begins and ends, it is impossible to guess at all.

Knit a trendy beret with embossed wavy pattern. The cherry color of the beret will add color to the autumn look.

You will need: 3 skeins of red-brown Magic + yarn (50% wool, 50% acrylic, 80 m / 50 g) Brique; knitting needles No. 4.5 and No. 5.5.

Simple and fast you can knit a hat in technology partial knitting or in shortened rows. Most light pattern knitting - garter stitch, looks good on a hat. The embossed vertical lines of the pattern will be more expressive if the hat is knitted from thick yarn or thread in several folds.

A knitted hat without decoration looks more like a man's, but decorating it with a knitted flounce or a flower, it will acquire a feminine charm.

Warm knitted beanies original form with interesting patterns will delight you, warm you and create a fashionable look.

Gray beanie with pompom

You will need: yarn "Merino" - (50% merino wool, 50% acrylic, 200 m / 100 g) 100 g of gray, 20 g blue flowers, knitting needles number 4, hook number 6.

Garter stitch: persons. and out. rows out. loops.

Beanie of light lilac color

You will need: yarn "Merino" (50% merino wool, 50% acrylic, 200 m / 100 g) 150 g lilac, needles No. 4.

Knitted hat and scarf collar made with knitting needles from warm woolen strand, weave volumetric braids effectively hugs the head and adds pomp to the scarf.

Head circumference 56-57 cm

YOU WILL NEED 300 g of white (# 01) Adelia NELLY yarn (70% wool, 30% acrylic, 100 m / 100 g), GAMMA knitting needles # 3.5, GAMMA hook # 2.5

Handsome fashionable beret can knit simple garter stitch, for a set, tie a scarf to a beret. The elegant classic shape of the beret and the combination of two contrasting yarn colors will make the wearer of this headdress attractive.

You will need: 300 g (250 g yellow and 50 g black) yarn (50% wool, 50% acrylic), knitting needles No. 5, No. 3

A scarf is the main autumn accessory, it can complete your image, due to its brightness, stand out from the crowd and protect yourself from the cold. This scarf " autumn leaves» bound knitting needles not difficult pattern with motifs leaves, and its originality lies in tying motifs vertically different colors yarn.

For a more leafy look, choose warm, fall-colored yarns for knitting your scarf. For example, a scarf is knitted from thin acrylic yarn, used two toe needles # 3.

With the onset of cold weather, each person needs warm clothing. The hat will protect and warm your head. But, as always, for the new season I want to have new thing that will be not only beautiful, but also warm. It is not so easy to buy a hat in a store that will meet all the requirements. But there is a way out! You just need to buy quality threads and knit it yourself.

Hats for women and girls, knitted of variegated melange yarn, have a special charm. When knitting from colored yarn of sectional dyeing, a unique pattern is born each time, and even if you knit two things from one ball with the same pattern - for example, an oblique with a shadow - they will still turn out to be completely different. A beanie hat knitted from fluffy multi-colored mélange yarn and a beanie from delicate velor will also look great. If you are afraid that the hat will turn out to be not winter enough, it can be knitted either from warm woolen or mohair yarn, or fitted with a warm fleece lining.

For needlewomen who are engaged in knitting, there is a huge selection of yarn. It can be different not only in color, but also in composition. The most practical and demanded for a long time is melange yarn. If you translate the word "melange", you get a "mixture". It is the mixture of different colors and shades that constitutes the melange yarn.

The assortment of such a thread is large. You can even find colors that, it would seem, do not even match. Or maybe a thread of the same color, only different, close shades.

You could get such a thread before by connecting different threads into one. Modern manufacturers use special technologies to produce real melange yarns. In it, one thread can be dyed in different colors.

Melange yarn is very interesting. It can be used for knitting various products, including hats. Thanks to the thread of different colors, the product is obtained with pronounced stripes or areas that differ from each other. A thread with glitter will allow you to get an excellent iridescent canvas, which cannot leave others indifferent.

Patterns

Melange yarn has one undeniable advantage: you do not need to come up with complex and intricate patterns. Even if you knit a canvas ordinary garter or hosiery knit, then it will look original and elegant.

Melange yarn for beginners is a real find. First of all, there is no need to "suffer" with a complex pattern. Well, secondly, minor defects that can be made as a result of knitting will be completely invisible due to the variegation of the canvas. The best place to start is simple scarf and hats, and over time to improve their skills.

If you knit a 1x1 or 2x2 elastic band from such threads, then the loops will not be very noticeable anyway. So, the following simplest patterns are knitted from melange threads:

hosiery;
shawl;
any elastic band;
rice knitting, etc.

Schemes knitted patterns can be found on the internet. The choice of a pattern for the cap, as always, is yours. If you need a tight knit, then you can knit braids, if the fabric should be moderately thin, then a simple front surface will do.

Patterns for women's hats

Depending on the thickness of the selected thread, the yarn will be consumed. When knitting hats, a thin thread is folded in two folds so that the product is dense and warm.

To tie such women's hat, you need to fold a thin thread in half. Finding out the number of loops that you need to knit a given model is very simple. You just need to knit a sample of the pattern according to the diagram or according to the description, selected threads, and use it to calculate how many loops will go in a centimeter. Having measured the circumference of the head, and knowing the number of loops in a centimeter, you can easily calculate the number of loops for the product.

This model is made on 4 knitting needles, but you can knit it on 2, but there will be a seam at the back.

Basic knitting:

row: 1 person, 3 out;
row: two persons, * 1 out, 3 persons *;
as 1st;
as 2nd.

Since the description is quite simple, the circuit will not be required for it..

With such a pattern, you need to knit 20 cm. After that, you need to make subtractions. To do this, on each knitting needle, first, you need to knit 2 stitches together. It turns out that 4 points in a row are reduced at once, and at regular intervals. Such reductions need to be done eight rows in a row. Those loops that remain are simply pulled together with a working thread. The product is ready.

Hat knitted from melange raspberry yarn

Main pattern:

From row 13, the pattern is repeated from row 1.

The required number of loops is typed on the knitting needles and knitted with the described pattern of 15 cm. Further, the work continues with the front satin stitch. At a height of 25 cm from the start of work, you need to draw up the bottom. At regular intervals, 2 stitches are knitted together with the front... Several rows are repeated in this way, the main thing is that each subsequent decrease must be done over the previous one. The remaining loops are pulled together with a working thread. A side seam is being made.

Knitted women's gray hat

This product is very interesting. To knit such a hat, you will need melange yarn of gray shades of medium density. In order to see how the pattern looks on these threads, it must be knitted using a diagram or description. Having received the sample, we do the necessary calculations and determine the number of loops for the product.

As you can see from the photo, instead of an elastic band, a wide rim is used, tied with a garter stitch. The top of the cap is knitted with a spikelet pattern. It can be obtained from the vertical tracks of long dropped knit stitches in garter stitch. When decreases are made, these spikelets become closer to each other, and at the end of the work, they are connected at the crown.

Getting Started.

We collect the required number of loops on the knitting needles and knit 15.5 cm in garter stitch. Next, we begin to make decreases. Two loops are knitted together after the edging, and then each is 7 and 8. At a height of 17.5 cm from the beginning of knitting, we make decreases again. We knit the first two sts, then we knit 2 sts together, the subsequent decrease will be with each 5 and 6 loops.

When the canvas turns out to be 21 cm, you need to make spikelets. Knits: hem, 2 p. Garter stitch, * 3 spikelet stitches *, 3 p. Garter stitch. Repeat from * to *. The spikelet is made only in 36 rows, you do not need to dissolve it below. There is no scheme for this pattern.

After completing the "spikelet", you need to pull off the remaining loops with a working thread and sew the product.

Women's hat, knitted with thick knitting needles

With thick threads and thick knitting needles, the hat can be knitted in a matter of hours. There will be fewer loops for work, and the product will knit in height very quickly. The hat is knitted without a lapel, and on top it is decorated with a pompom.

The pattern for such a hat is the simplest one:

front surface;
pearl pattern.

Front stitch: all front loops in the front row, and purl - in the back row.

Pearl Pattern:

row: persons, purl;
row: the purl is knitted over the front, and the front is knitted over the purl.

The pattern is repeated as row 2... The pattern diagram is not needed, since the description is complete.

The loops typed on the knitting needles must be distributed so that the pearl pattern is repeated twice (in front and behind). For example: 15 stitches with front satin stitch, three stitches of pearl pattern, 15 stitches with front stitch, 3 stitches with pearl stitch. You need to substitute your number of loops for facial surface... For a pearl pattern knitted with thick threads, 3 loops will be enough.

The proposed pattern fits 17 cm, then you need to make subtractions. So as not to get hurt beautiful pattern, decreases are made on the front surface, at the beginning and end of the section. Nicely knit 2 loops together. So, in one row, 4 subtractions are obtained. You need to tie 6 such rows, and after that, the remaining loops must be pulled together with a working thread. Knitted product ready.