Knitted slippers are quick and easy. Spoke tracks: models with a description

There are many patterns according to which warm indoor slippers are knitted using only two knitting needles. In the master class we will talk about simple ways ideal for beginner craftswomen.

Home slippers on two needles with plaits

The lesson will help you master the making of spectacular slippers for the following sizes:

35/37-foot 22 cm.
38 / 39-24 cm.
40 / 42-26 cm.

The model is easy to knit because it is made with two knitting needles. This option is perfect for a novice needlewoman. Here, a garter stitch pattern is used, as well as a braid according to the patterns, for the left sneaker it is A1, for the right one - A2. The diagram shows that the pattern depends on the size of the shoe. The knitting density is 13 stitches and 26 rows in a 10 x 10 cm pattern.

Materials and tools:

Blended yarn (100 g / 100 m), 100 grams.
Knitting needles straight and circular number 5.
Additional spoke.
Two pins.

Description of needlework step by step:

Cast on 36/38/40 stitches for the left sneaker. You need to start with a garter stitch, performing 4 cm.
Continue knitting on the first 11/13/13 sts, leaving the rest on an extra knitting needle.
In the first row, all facial loops (LP).
Add 2 to 2.
Add 2 more to 3.
Perform the fourth row according to the A1 scheme, with edging along the edges.
Knit according to the pattern until the height of the fabric is 6.5 / 9 / 9.5 cm.
In the last row, decrease to make 11/13/13 stitches on the needles.

You have the stitches on the extra spoke and the top knit area. Lift up the edging sides of the top, 12/14/16 pieces on each side. The total is 60/66/72 loops. Continue shaping the sneaker, marking the toes and the middle of the heel with pins. Then knit 2 cm of PL, and subtract 1 loop at each side of the pins (knit 2 PL together). When making decreases, knit to a height of 5/5/6 cm, and cover everything. To assemble, sew a seam on the sole, making a joint between the two halves. Make the right slipper in the same way, using scheme A 2. If you make a calculation for a small size, you get children's option sledkov.

Video tutorials: knitting slippers with braids

A gorgeous royal braid in the center of the shoe.

An easy way for beginners.

Beautiful braids and the absence of a seam are the main features of the model.

Making slippers on 2 knitting needles with a description

A simple method allows you to knit original slippers from colored squares.

They are made on two knitting needles and crocheted.

For size 36-39 you will need:

Wool yarn with acrylic is thick (50 g / 34 m), 2 skeins of black and orange shades.
Straight needles number 4.
Hook number 4.

The stripes are knitted in garter stitch, changing the color of the yarn after 2 rows. For needlework, patterns such as rice and pearl designs are used.

The density of the fabric in a 10 x 10 cm sample is 15 loops and 15 rows. Connect the squares in this order.

Step by step description:

Sew 2 squares A with pearl knit orange thread. For one, cast on 15 loops and knit 10 cm. Do not close the latter, but cast them on a thread.
Then knit 1 square B according to the scheme of Figure Rice, in the same color. Knit 10 cm, and thread through the loops.
From 15 loops, make a Rice pattern with black threads.
Then 2 black Ds in garter stitch.
Next, complete 2 squares E with garter stitch using both colors.

Assemble the product, and at the end sew the C and D sides of the top. Crochet side E using a ratchet step. The advantages of the model are that it can be both female and male, and is knitted with a simple technique. Plus, you don't have to knit tricky parts like the toe and heel.

Video: Simple Quarter Slippers

Cotton slippers on two needles

To knit slippers in size 36-40, prepare:

Cotton yarn.
Remains of wool and beads for finishing.
Knitting needles number 4.
Hook number 2.

Detailed description:

For the base, you need to dial 34 loops, and knit in the following way.

1st row: edging, 32 sheets, edging.
2nd: edge, 10 LP, 1 purl loop (PI), 10 LP, 1 PI, 10 LP, edge.
From 3 to 34: odd as the first and even as the second row.
35th: after edge 11 LP, 1 add (from 1 loop 2), 8 LP, 1 add 11 LP, edge.
In the 36th row: edging, 10 LP, 1 PI, 12 LP, 1 PI, 10 LP, edging.
37th: edging, 34 LP, edging.
38 to 63: even as 36 and odd as 37.
From 64 to 72, an elastic band 1 x 1 is knitted.

You will receive such a blank.

Everyone dreams of home comfort and coziness. In general, the whole atmosphere in the house contributes to this. Comfortable indoor slippers also play an important role. To provide yourself and your loved ones with real convenience, it is recommended to tie them with your own hands. On the one hand, this is a reason to have a good time, because, as you know, this type of needlework has a calming effect. On the other hand, this is quite simple to do. Step-by-step instructions for beginners with a photo will help you make your plans come true.

Required materials and tools

Knitting needles are the main tool for knitting home slippers. The density of the future product depends on their thickness. For example, if you plan to knit lace slippers, thick knitting needles will come in handy. For warm and durable footprints, you definitely need thin knitting needles... They can be connected with a line or without it.

Yarn acts as a material for knitting slippers. It is important that it is durable, does not fade, does not wear off, and is pleasant to the touch. Otherwise, it will not be possible to create a high quality product. The most suitable yarn is with the addition of synthetic threads. If you choose pure wool, the slippers will be prickly and slippery.

Additional tools and materials - scissors, a needle, a measuring tape, a hook.

Home slippers size

Exists different schemes knitted slippers with knitting needles, and the choice of size depends on it. If you make a product in the form of footprints, measurements are taken in the same way as when knitting ordinary socks. In this case, you can use the data from the table.

In other cases, when a thick sole or insole is used for home slippers, the size is defined as the size of the shoe.

Step-by-step instructions for knitting children's slippers with knitting needles

You can knit slippers with knitting needles for every family member, from a newborn to a grandfather and grandmother. In this master class, a female version of footprints is presented, which is also suitable for a girl. The main thing is to choose the right size. You will need a green thread in two shades: dark and light.

Below is the step-by-step instruction for beginners with a photo and description, guided by which you can knit slippers with knitting needles:

You need to start by calculating the loops. You will need to type them 31 with a dark green thread.
It is necessary to knit 2 rows with front loops without a crochet. You will get a garter stitch. After that, you should attach a thread of a light shade and make 2 similar rows. Then again knit 2 rows in garter stitch using dark thread.
Next, you need to knit a row with a light green thread in this way: 1 loop is knitted with the front one, 1 is removed. Such alternations must be done up to the middle of the row (up to 16 loops).
From the middle of the canvas, you need to make a shell. To do this, knit 1 front, yarn, 1 front, yarn and so on, until 9 loops are obtained. The remaining half of the row is knitted in the same way as the first.
The next row continues knitting, as in paragraph 3 (until the middle of the row). Then 1 loop is removed, 1 is knitted until the row ends.
The next row should be knitted like this: the loops that are knitted should be knit, and those that have been removed should be removed again. In this case, the thread is in front of the loop. The shell itself is performed using face loops without a crochet.
Next, 2 rows need to be knitted with front loops with a dark thread.
The next rows are repeated until the required number of shells is obtained. In this example, there are five of them. Do not forget that in each row the center will be different, since there is an addition with the help of yarns. Thus, after the fifth element, there will be 71 loops on the needles.
When all the shells are ready, you need to knit 2 rows with needles, using a dark-colored thread for this. Next, you will need to alternate 4 times in 2 rows in different shades. All this is done in garter stitch.
The top of the slipper is ready, now with the same knitting needles you should start knitting the sole according to the "heel" principle. For its width, only 9 loops are enough. The sole is made with dark yarn. Considering that at the moment there are 71 loops on the needles, you must first knit 31 in garter stitch, and the next 9 like this: 8 - front, 9 - together with 10 front loop.
After that, the product unfolds with the other side, the first loop is removed, 7 - front loops, 9 from 10 - purl loops.
Then the canvas from which the slippers will be created is turned over again with the other side and the steps are repeated until the loops on the sides end.
Now it's time to knit the back of the slipper with knitting needles. To do this, you will have to repeat the sidewall pattern. The backdrop starts from the bottom of the product. In other words, you need to complete 2 rows with a dark thread, then 2 rows with a light thread, then again 2 rows with a dark thread, and so on. You need to act as follows: the first loop is removed, the rest of the loops that are on the knitting needle are knitted with the front ones, the last one is knitted with the front one together with the loop of the side row.
Then the canvas must be turned over the other side. The first loop is removed, the rest are knitted to the end of the row, the last loop is knitted together with the side.
Thus, knitting continues to the end, adhering to the pattern.
It turns out such an interesting backdrop, as in the photo.

Knitted slippers are almost ready. It remains to close the loops, cut the thread, hide the ends. Now you can admire the handmade product.

For this master class, you can knit any slippers with knitting needles, only use a different color yarn, a different pattern. There is no doubt about the quality if you carefully approach the choice of thread and the knitting process itself with all responsibility.

Video for beginners: how to knit slippers

Do-it-yourself home slippers cannot be compared with purchased products. In addition to the fact that they are original, they can be completely created according to your own taste, use your favorite pattern, decorations, and more. Knitted slippers are comfortable and warm.

Below is a video tutorial for beginners. It will help to knit footprints, which will always be warm.

It is not necessary to use a garter stitch to make home slippers with knitting needles. There are a huge number of patterns in which it is time to get confused. Some needlewomen prefer exclusively hosiery. According to them, such products look more attractive.

In the video you can see how to knit slippers with knitting needles.

Don't be afraid to experiment. For experienced needlewomen it will not be difficult to come up with your own pattern and knit slippers, knowing the basic technique of execution. Below on the video you can see a lesson on knitting women's footsteps with embroidery.

DIY slippers can not only keep all family members warm. It is also a unique gift that will be a pleasant surprise for any hero of the occasion.

In this article, we will look at master class on knitting home slippers with knitting needles.

Some people do not like to wear ordinary slippers at home at all. But in winter, having come home from the frost, I really want to hide my legs in warm knitted slippers, or footprints, as they are otherwise called. They fit tightly on the legs, do not fall off like ordinary slippers, and do not squeeze the legs. And children also love to skate in them on the laminate, like ice skating))))

In stores now there is a huge variety of all kinds of slippers, footprints, socks and other varieties home shoes... But how nice to wear beautiful home slippers which are made do it yourself, in which a part of the soul is invested! It seems that they are both softer and more pleasant, and they warm better.

I bring to your attention lazy jacquard knitted slippers(pattern with shells).

This pattern is simple to execute and looks beautiful. We will knit on two knitting needles. Even a novice needlewoman can handle knitting these footprints.

For knitting, we need yarn of 2 colors and knitting needles corresponding to the thickness of the threads.

I took the thick one bulky yarn purple and white flowers(from hamster stocks, so I won't tell you the name) and knitting needles # 5.

I knit footprints for 34-35 foot sizes.

The pattern is knitted on the basis of garter stitch, i.e. all rows are knitted with front loops.

Step-by-step knitting of footsteps.

Knitting takes place from top to bottom and ends with knitting of the sole.

We cast on the knitting needles 31 loops with a purple thread.

Knit 3 purple rows of garter stitch (all rows with knit stitches).

We attach a white thread and knit 2 rows.

2 rows with purple thread.

The main pattern.

Getting started knitting main pattern... It consists of a repetition of 4 rows.

We mark the middle loop. It is needed to knit a fan.

1 row(facial). White thread. Edge loop we remove. We knit the first loop (persons), the second loop is simply removed on the right knitting needle (the thread is at the same time behind the knitting), the third is knitted again, the fourth is removed ... So we repeat until the middle loop. We remember which loop turned out in front of the middle one (knitted or removed). This is necessary for the symmetry of the pattern.

Middle loop. We knit a fan from the middle loop. We knit 7 loops from one loop: we knit the first; without removing the loop from the left knitting needle, we make a yarn; from the same middle loop we knit a third loop; fourth - yarn; we knit the fifth; sixth - yarn; we knit the seventh; only now the middle loop can be removed from the left knitting needle.

We remember which loop we had BEFORE the middle loop - knitted or removed. We knit the same loop immediately after the middle one (after knitting the fan). If it was knitted, then we knit this one, if removed, we remove it. And until the end of the row, we continue to alternate the loops - knitted, removed ...

2 row(purl). White thread. We knit white loops (front), purple - remove again. When removing loops, the thread is BEFORE knitting so that the broaches remain on the wrong side.

3rd and 4th rows... Purple thread. We knit all the loops with the front ones.

If it is not very clear explained in text format, then see

Thanks to the fan, the slipper expands. We repeat knitting of the main pattern with lazy jacquard to the required size. I got 7 fans.

Sole.

We finish knitting a slipper by knitting the soles.

In fact, this is not even the sole, but the closure of the loops, tk. the previous 7 rows (from the white stripe) belong to the sole.

We mark the middle loop. We need the middle 3 stitches. They will form the "sole". The rest of the hinges are the sidewalls of the track.

We knit the loops of one side wall with the front ones (up to three middle loops). We knit the first and second sole loops with the front ones. We knit the third loop of the sole together with the loop of the side wall.

We turn over the knitting. The first loop is an edge loop, we remove it. We knit the second front. We knit the third together with the loop of the side wall. We turn over the knitting.

Thus, we repeat until there is 1 loop of the side walls (5 loops in total).

We close all the loops.

We make a T-seam: back and heel seams.

It's the same in video format:

We also knit the second track.

And voila: ready!

Do-it-yourself shoes have long earned well-deserved love from both those who knit and those who wear: needlewomen have learned to knit everything - from warm boots to stylish sandals - even fashionable beach slippers can be knitted by yourself!

But if such work is sometimes only possible for masters, slippers can be knitted not only by an experienced knitter, but also by a beginner in this branch of needlework. Knitting patterns are incredibly simple, but the products themselves are amazing, warm and beautiful. And from some types of yarn, it is also delicate, like a lilac mist. In just a few days, you can make soft indoor shoes for all family members.

Slippers for women can be knitted and crocheted. At the same time, the number of knitting needles varies - each knitter chooses a knitting method for her hand - whether she will create a future masterpiece for the house on 2 knitting needles, or 4 knitting needles, or even on circular knitting needles. Below we will just analyze these methods.

Knitting slippers can be knitted not only by an experienced knitter, but also by a beginner in this branch of needlework.

Knitting slippers in this way is possible even for those who, until this moment, have never held knitting needles in their hands. If you are looking for simple and easy-to-use sneakers for the first experience, this is the place for you! The scheme is very simple, even a child can handle it.

We knit step by step:

Cast on 48 stitches and knit in first row.
Starting the second row, attach yarn of a different color and knit a couple of rows for it.
Alternating color every couple of lines, make 13 cm of the product.
After that, close eight loops on both sides and knit the remaining section with a length corresponding to the length of the foot.
Then knit a row with a decrease in the loop on each side.
Make the next row without decreasing, and on the last row remove a couple of stitches again.
Pull the thread through the stitches with a crochet hook, pull them together and secure.
Make the top seam of the foot and the seam on the heel.

By the same principle, knit the second sock.

Gallery: knitted slippers (25 photos)

Simple knitted slippers for beginners (video)

How to knit slippers on two knitting needles: a description of creating a model

Guided by simple description, you can knit original indoor slippers with just two knitting needles. This greatly simplifies the knitting process. Seamless patterns can be easily created. And the size of the product can be any, it is enough just to increase or decrease the number of loops. Try it and make sure that even with just 2 knitting needles you can create real masterpieces!

Guided by a simple description, you can knit original indoor slippers with just two knitting needles

Progress:

Cast on only eight loops, then knit one row with the front ones.
In the next row, make an increase according to the following scheme: a pair of front ones, a yarn, four front ones, a necklace and a pair of front ones.
Draw a line again without an increase.
At the next stage, make an increase according to the following scheme: four facial, yarn, a pair of facial, yarn and four facial.
After that, continue knitting with a pearl pattern until the item is nine centimeters long.
At the end of the next pair of lines, cast on nine loops.
Continue to knit with a pearl pattern until the item is 21 centimeters long.
After that, knit nine knit stitches and turn the work, start knitting the reverse row.
Close the first twenty-one stitches, and knit a couple of rows on the remaining ones and finish knitting.
Pull the thread through the initial loops, pull the sock and sew the socks along the central part, while leaving an open section six centimeters from the top of the product.
Sew the edges along the back.

Knitted baby slippers: step by step instructions

When making your own slippers for children, you need to take into account that such products should be not only soft and warm, but also beautiful. From cheerful multi-colored yarn, you can create bright and unusual models - it can be slippers in the form of cars, or marshmallow-shaped, or slippers-pigs that are popular this year. The most unusual option for home shoes for a child is mouse slippers. The kid simply does not want to part with them, and, accordingly, his legs will always be warm.

Progress:

Initially cast on 28 loops and knit, alternating the front and back twelve lines.
After that, continue knitting with the front stitch.
In order to form the heel, divide the loops into three parts and place them on three knitting needles (there should be ten loops on the outer ones, and only eight on the central one).
Knit only the central knitting needle, and at the end of the row connect the last loop with the first one on the other knitting needle.
After there are no loops on the side knitting needles, continue knitting in a circle. To do this, lift ten loops from the side of the elastic band, dial ten more on the third, and raise ten from the elastic on the fourth.
Knit six centimeters of the product in a circle.
After that, start knitting a pair of loops together when switching to a new knitting needle.
When there is only a loop on each of the knitting needles, they must be knitted together, and the thread must be pulled off and hidden on the wrong side.
Crochet the eyes and nose.
Crochet the ears, for a start, simply by typing three air loops.
In the first row, make a couple of single crochets.
In the second, there are already three, and in the third, four.

When making your own slippers for children, you need to take into account that such products should be not only soft and warm, but also beautiful

Sew on the finished ears to the sneakers.

How to tie men's footprints

Footprints for adults are no more difficult to knit than for children... For men, these socks will be simply irreplaceable. For an experienced needlewoman, their manufacture is a matter of a couple of hours. Of course, one cannot say that they are downright lazy, but they knit quite simply even for beginner knitters.

Footprints for adults are no more difficult to knit than for children

Progress:

Cast on sixty stitches at once.
Knit fifteen rows with an elastic band.
Immediately distribute the loops over a pair of knitting needles, and leave one in the center.
Knit one half with a garter stitch, make a yarn over, knit the central part.
Make the yarn over again and knit one more piece.
Thus, to make the boring depth of the future track.
Divide the work into three parts, selecting fifteen stitches in the center.
Initially, half is knitted, then the middle of the loops, leaving only the last one.
Knit it with the first loop of the second half.
Turn the product and therefore knit this row on the same principle.
Continue working until there are only fifteen loops left in the center.

The loops that remain, knit in several lines and finish with the first part not on the side.

Japanese footsteps with knitting needles: master class

Ethnic style slippers and footprints are very popular - for example, Turkish footpaths, or Scandinavian pointed toe slippers with beautiful Norwegian patterns. Japanese footprints look incredible... It even seems to many novice needlewomen that their manufacture is already very difficult and beyond their strength. But this is not so, having dealt with the scheme, the work will be fun and simple.

Japanese footprints look incredible

Progress:

Cast on 40 stitches on the needles and knit with an elastic band, alternating a pair of knit stitches with a pair of purl stitches eighteen centimeters in height.
Continue to knit already in garter stitch, while decreasing a pair of loops on each of the two sides.
Continue knitting in this manner until only five stitches remain on the needle.
Knit twenty rows of strings.
Do the same on the other side.

Fold the workpiece in half and immediately sew from the sides.

Home boots: knitting with knitting needles

Such small chuni will help warm the baby's legs in winter. They fit quite simply, while looking quite impressive. And the child is unlikely to want to take them off, unlike ordinary sneakers.

Progress:

Cast on ten loops and knit the sole of the desired length on them.
After that, dial on all sides of the loops.
In a circle, knit five lines with front stitches.
On the next three rows on the front knitting needle, knit three purl, then six front and again three purl.
On the next line, turn the loops to form a coil. To this end, knit three purl loops and remove three stitches on the same knitting needles.
Hook the next three stitches and move the stitches from the first knitting needle.
Knit alternating six purl and only three facial, not letting in the loop, which is located near the last knitting needle.
Move the left loop to the front knitting needle and knit together with the adjacent one.
After that, knit in accordance with the pattern until there is only one stitch left, it will need to be knitted with the side.
Expand the row and continue knitting, knitting the last loop with the adjacent one.
In total, knit six rows.
Continue knitting in a circle (24 rows in total).
Close the loops.

Insert the lace at the ankle.

Knitted slippers (video)

Home slippers can be simple, classic or original. If they are tied with their own hands, then they have much more advantages. The legs are very warm in them, and the skin does not dry out at all. After all, they are made in accordance with personal preferences. Any needlewoman very carefully approaches not only the choice of the model, but also the yarn. Naturally, the shoes are of high quality.

In our hectic life, we sometimes want to relax and unwind. Needlework gives us such an opportunity: sewing, knitting, embroidery. To whom what kind of activity is closer, he gets pleasure from it. For most women, knitting is easier and closer, so now slippers knitted on two knitting needles with patterns and descriptions are very popular. These tips are used by many talented people who love to knit.

Any craftswoman always has a lot of multi-colored balls somewhere. Collect them all and create a unique DIY gift. The article will discuss how to knit slippers on two knitting needles for beginner needlewomen.

Cozy slippers on two needles

It is very easy to knit such slippers. Nineteen rows of fifteen stitches - this should be approximately ten centimeters square. For an increase, add two yarns on different sides. You need to start work from the end and from the top to the bottom. You need to knit forty knit loops, and so eight rows. Find the center of the product, add a loop on the side and in the middle. Close on a loop for four rows. After knitting ten more rows, close again. When you're done, just fold and sew the lovely slippers. With such a light movement of your hand, you have knitted slippers on 2 knitting needles.

Modern slippers

This work is not difficult at all. Prepare threads, knitting needles, scissors. Have all the necessary supplies at your fingertips. Choose a thread of the desired color and thickness.

Take note! If the slippers are intended for the cold season, then take a thicker thread.

To get started, you need to dial ten loops and knit sixteen rows with front loops. Such knitting is suitable for its density, it does not have the property of twisting, and they call it garter stitch... After completing the initial stage of work, you should get a six by six square. In further work, be guided precisely by such dimensions.

Type nineteen stitches on the same knitting needle.

Now you need to knit six centimeters or sixteen rows.

On the other hand, on the other hand, add nine pieces.

Now knit sixteen rows and close all the loops.

Prepare a symmetrical piece, it will be needed for another slipper.

Such interesting slippers on 2 knitting needles knit seamlessly, but then they need to be fastened with a hook. Try to fold the product correctly as shown in the picture.

Start tying with a different color of thread, but choose fashionable combination flowers. Connect the edges of the slipper, start at the toe.

Then bend the workpiece and tie the main part of the slipper.

Last but not least, you need to process the heel, tongue and back of the product.

Do the same manipulations for the second sneaker. And such beauty is already ready!

Footprints? Easily!

There is a huge variety of knitting with two knitting needles. It's so interesting. Consider an example of knitting such interesting slippers. Work begins at the top of the product. Cast on about forty-three stitches, the main thing is that the number is odd. Tie with a short elastic band or pattern. Knit in whatever pattern you want, but remember to crochet to and after the middle of the loop. In the next row, such yarns should be knitted like regular loops. Work like this for fifteen to twenty rows. It all depends on the size of the foot of the person to whom you knit these footprints.

Fashion trends and secrets of knitting footprints

Each work has its own flavor. So there are secrets in creating footprints.

If a novice needlewoman wants to gain experience in knitting footprints, then on initial stages it is better to try to work with a single color thread. And when the skill has already accumulated, then you can make various colored patterns, combine several colors.

Cool and fashionable footprints are obtained, decorated with various ribbons, strings, decorated with flowers. Nowadays it is very stylish to dress up in boots. They look very nice and elegant. It is especially popular to attach an elastic band on top.

And in the summer, moccasins look cool. The pattern for creating them is the same as for regular footprints, but only a durable outsole is added. High sides are added for charm. This makes the leg look very attractive. Many craftswomen are also fond of adding a ribbon that wraps around the ankle very nicely. This innovation is also loved by young people.