How to make a French manicure at home? How to do a French manicure: step by step instructions How to do a French manicure for yourself.

French women are girls who know how to properly emphasize their natural beauty. French manicure is the simplest, but at the same time, beautiful and stylish technology for decorating nails, which can be easily repeated at home.

Views

Not everyone knows that in fact, the French technology of nail decoration appeared in the USA. There are several techniques that differ not only in the principle of execution, but also in style.

Types of French manicure:


Naturally, in this way, you can do not only a manicure, but also a French pedicure. On the legs, only the big toe is framed with a pattern.

Also, the technique is classified according to the varnishes with which the procedure is carried out. French manicure can be done with gel polish (aka Shellac) or with a simple varnish. Also, beauty salons often offer biogel nail extension services, they can immediately provide the decoration of nails with a strip, bows and other patterns.


Some features of gel and regular varnish:

  • It is more convenient to paint with gel polish various patterns... In addition, it is the gel that makes liquid stones, which are now considered the most fashionable trend;
  • Some girls don't like consistency. Gel polish is quite difficult to remove on your own, so you will have to walk with such a design for at least 1.5 weeks. Simple varnish can be repainted every day;
  • Acrylic manicure, biogel, like building-up, can be decorated with modeling, stones, stickers;
  • The durability of the varnish deserves special attention. Shellac adheres to the nail plate regardless of external factors. A quality coating can be compared to ceramics.

# 1 Manicure for short nails

The latest fashion trends say that a beautiful French manicure can be done on short nails... It should be noted that it was previously believed that the jacket is suitable exclusively for long plates, therefore, for this technique, it was often necessary to additionally increase the length.

Step-by-step instructions on how to make a short French manicure natural nails do it yourself:

  1. You need to trim your nails. Depending on the condition of the cuticle, it is also recommended to trim the skin, clean the plate from roughness and lubricate it with oils or other nutritious composition for a while;
  2. The base coat is applied first. It fills in gaps on the plate and contributes to a more even application of color;
  3. It is believed that drawing stripes is better than using stencils. To draw "smiles" you need to buy white varnish with a thin brush or a separate brush for painting on nails. First, the outline is drawn, after which it is carefully painted over with white;
  4. If you cannot draw the stripes evenly, then it is better to use a stencil. These stickers are sold at any beauty store. You can also make them yourself from scotch tape. On the surface of the tape, you need to draw a template, then cut out the desired smile on it. It is very convenient that you can make any pattern;
  5. After processing the ends in white, you can stick rhinestones along the edge. If there is an interesting bright varnish available, then you can paint over a thin decorative strip, as the edge of the transition between white and beige (pink);
  6. A fixative is applied on top, which will help prolong the life of the manicure.

Glitter or rhinestones can also be placed over the tips. For work, you can use ready-made kits from Miss Selene, Avon or individual varnishes Orly, El Corason. By the way, now there are new products from these companies, offering resistant options (varnish can withstand up to 7 days).

Video tutorial: how easy it is to make a French manicure

# 2 Technique gel polish

Gel polish is much easier to paint. With its help, it turns out very beautiful and interesting design, they can arrange any pictures (if you have at least a little experience). We will consider how to make a French manicure with a pattern at home in stages using gel polish:

  1. Immediately, we note that this technique is suitable for any nails: square, round, oval. Therefore, everything depends only on your own preferences and suitable shape plates;
  2. You will need a starter kit to work. It includes an ultraviolet lamp (the simplest one has an exposure time of up to 2 minutes, but this is quite enough for nail design without frills), a base, a fixer, colored varnishes. You may additionally need to buy a degreaser;
  3. First, the plate is wiped with a degreaser, which will help unclog the pores. After the nail is dried and the base is applied to it. Depending on the brand, it needs to be dried under a lamp for 1–1.5 minutes;
  4. Now the process of drawing a picture begins. As in the previous method, a contour is drawn with a brush. Sometimes an acrylic pencil is used (you can buy it at almost any professional nail shop). First you need to paint the plate with color, then dry it;
  5. Next, the contour of the smile is painted over. If you are doing your own manicure, we recommend that you do not make a deep oval bend - it is easier to draw an even contour. The outline does not have to be white. Pink, gold, red and green curves look very stylish;
  6. The decorative addition of some marigolds looks very nice. To do this, butterflies, bows, hearts or flowers are drawn on the ring or middle finger (near the contour). They are not as difficult to make as it seems, but they look very stylish and feminine;
  7. After that, the marigolds are dried again, after which the last layer of the fixative is applied. It remains to dry it and wipe the varnish with a degreaser.

So in this way you can create any French manicure: New Year's design, wedding, everyday, colored and monochromatic. We recommend that you pay attention to the airbrushing technique, which is now offered in every second salon. It uses an additional device that is similar to a standard atomizer. With its help, you can apply any patterns on the nails, everyone can use it. By the way, this novelty costs about $ 10.

# 3 How to make French shellac

Classic French shellac is made without stripes and clear transitions - this manicure turns out to be light and elegant. It should be noted that its time is spring-summer, when makeup colors become lighter than in the cold season.

French manicure with shellac is performed in the same way as the options described above, so we will consider how to make ourselves an original winter pattern:

  1. All points, until the moment the varnish is applied over the edge, are completely repeated from the gel varnish. When the contour is applied, you need to carefully draw the selected pattern with a brush. Let's take a bow decoration as an example;
  2. Variations of shades can be any, but bright red, blue and gold look the most beautiful with white and pink. If you want a stricter version, then the pattern can be drawn even in black;
  3. A bow is drawn with two triangles, from the center of contact of which sharp tails are displayed. They don't have to be wide. You can make them slightly curved;
  4. First, a white line is drawn, after that the marigold is dried in a lamp. The bow is painted next;
  5. It remains only to dry the last layer of varnish and fixer and wipe the plate with a degreaser.

French manicure is today considered one of the classic types of design. Due to its versatility, it will always stay on the crest of the wave. Therefore, those who are not yet familiar with the implementation of this design using modern coatings should familiarize themselves with the features of the design itself and study the step-by-step technique for its implementation.

Peculiarities

French, French manicure or French design - all these are the names of a single type of nail design. It appeared not in France, but in America; today the technology has already turned 40 years old. The idea of ​​its creation was born due to the lack of time for painting the nails of actresses. That is why there was a need for a design that would fit any image, which was created by the founder of the Orly Trading House.

Classic version the jacket has a flesh-colored background and a white smile, which is used to form a part of a grown nail.

Today, this trend is quite relevant in situations of a strict dress code. The jacket itself has long gone beyond the classics: in the center of attention fashion trends color solutions, as well as decorating nails with a smile. The shape of the smile of traditional French manicure can be different.

It depends both on the characteristics of the nail plate and on the shape of the cut of the regrown edge. The width of the contrast stripe may vary, sometimes it is very thin, in other cases it is completely diagonal. For example, almond-shaped nails have a wider smile compared to oval-shaped nails. And also today a smile can be fancy, which opens up a lot of opportunities for creating thematic and seasonal designs.

An inverted jacket is different from usual topics, which, in fact, is its mirror image. That is, his smile is located at the base of the nail bed. Such a manicure is considered one of the most popular today. It is used by beauty bloggers and celebrities.

The shape of such a smile can be very diverse. For example, in addition to the hole and imitation of the growth of the nail plate, it can be diagonal, triangular, semicircular and made as a contour stroke. One of the features of the modern jacket is its combination with all well-known manicure techniques. Moreover, it can be the basis or its accents. Plates with a contrasting smile can be decorated with different nail materials.

Ways of applying a "smile"

A smile can be made different ways... Beginners who are just starting to master working with gel polish should take into account the fact that due to the peculiarity of the composition, you can work without haste. The hybrid coatings that are used in French manicure today do not dry without a special lamp. Therefore, you can safely design and adjust it before drying in a UV or LED device. As for the methods of applying the so-called smile, they depend on the design. In general, for beginners, the option using auxiliary strips or foil tape is better suited. Basic nuances different options can be conditionally divided into traditional (brush and stripes) and fantasy (stamps, dots, stickers, fimo).

Brush

Using manicure brushes to shape a French smile can be difficult for beginners. It is difficult to draw the lines equally evenly on all fingers to make the design look professional. Of course, you can contrive and resort to fantasy drawings, but if you do not have drawing skills, such a manicure will not look beautiful. To learn how to draw the necessary lines, and even more so by drawing to yourself, you should train on special stencils.

Stencils

French stencils mean special strips different shapes and width. Depending on the client's desire, you can use both traditional arcuate elements, and corners, waves, zigzags, hearts. However, stencils do not simplify the work 100%, as novice craftsmen might mistakenly think. Together with them, when separated from the base, part of the varnish with which they created a smile can also come off. And this means that you cannot do without a brush, because you have to correct the lines.

Dots

Sets of sticks with different attachments allow you to create one of the most popular French designs today. At the ends of the tools, there are metal balls that are dipped in gel polish, and then put dots on the nail plate in the right places. It is easy to work with such a tool, but at least without minimal training it will not work to make a beautiful smile. In addition to the fact that you need to clearly set dots in the selected shape, which should be ideally the same on other French nails, you need to make dots of different sizes.

Stamping

This method is easy, because working with stamps that have an engraved pattern will be perfect the first time. Stamping is distinguished by the accuracy of the lines, for which this type of design is chosen by the masters of the nail service. Like the previous version, this type of smile turns out to be fantasy. It is also applied to accent nails of manicure.

Slider design

Another solution to overcome the lack of experience in nail art is island or application sliders. Water-based stickers on a transparent basis are easy to use, such a jacket looks incredibly delicate and beautiful. It doesn't take as much time to create the desired design as it does the tedious alignment of smile lines.

Fimo

This material is used for a creative jacket. This decor is a variety of elements, cut into a thin layer of oblong sticks. These are a variety of stars, fruits, berries, which are simply glued in the area of ​​overgrown nail plates. The decor is voluminous, and therefore such a manicure cannot be called comfortable in everyday life. However, fimo can be used in aqua design by sealing on top with several coats of modeling agent.

Required tools and materials

Depending on the variant taken as a basis, the type of tools and the raw materials used for the design may differ. Let's take a traditional technique as a basis, from which in the future it will be possible to build on and improve the design with various decor. It is also important to first decide on the type of manicure, because it can be conventional or hardware.

As for working with the device, this method is more convenient and less traumatic for nails and skin around them. If there is no apparatus at home, and a woman is just beginning to get acquainted with nail art, you can use a basic set for manicure: nail scissors, nail file, pusher, tweezers.

You will also need to work:

  • rubber hoof;
  • napkins for manicure;
  • dehydrator;
  • soft polisher (buff);
  • drying lamp for nails of the required power;
  • base material;
  • finishing agent;
  • pigmented background varnish;
  • contrasting pigment for a smile.

If you plan to complete the design on accent nails, prepare the decor conceived by the design. When a dots is needed for decoration, but it is not there, you can use an ordinary wooden toothpick.

Preparation of nails and cuticles

Before starting preparation, the nails are treated with an antiseptic. After that, with a file, give the free edge of the nail plates the desired shape. At the same time, back and forth movement is strictly not allowed: all conditions are created for crumbling and further injury to the nails. In addition, two different directions of the file can cause manicure detachment.

After that, a special cuticle remover is applied to the side rollers and cuticle. It will help soften the skin and prepare it for faster and more painless removal. After the product is applied to all 5 nails, it is time for the most pleasant step. hygienic manicure... The hand is dipped into a bath with warm water (the water temperature should be at least 30–34 ° C). The hand should be in the water for about 3-4 minutes. After the required time has elapsed, they wipe the fingers and proceed to the manicure. Using a pusher paddle, push the cuticles and skin on the sides. In this case, you should not press on the instrument too hard, so as not to injure either the skin or the nail.

Next, they take tweezers or a scalp and cut off all excess and keratinized around the nail plate. It is important to keep the tool at the same angle and make sure that the cut is not intermittent. If everything is done correctly, then you can prevent the appearance of burrs in the future. After you walk with tweezers, you should take a pusher or an orange stick and clean out the pterygium. Before this, the stick must be soaked in water. You need to carefully walk along the contour of the nail when cleaning the pterygium. This stage will allow you to assess the quality of the work performed by the tweezers: to understand how well you cleaned the excess skin. If, when passing along the contour with an orange stick, skin remains are found, take the scalp and clean up what was not cut off immediately.

The procedure is performed on each nail. After that, a special cuticle oil is applied to the skin treatment sites. It is at this stage that the edged manicure ends.

In order not to injure the skin, you can take note of a few tips from the masters in the field of nail service. For example, trauma to the skin can be attributed to improper movements of the scalp or nail scissors. You cannot do it in jerks, and even raise the tool up. The cuticle should be removed with movements in the course of cutting the skin.

In order to minimize the risk of injury to the skin at this stage and not cut off the excess, you need to slightly pull the skin at the cut. So it will be visible where the cut ends, and the base line will not be ragged. We must not forget that before trimming with the larger side of the pusher, the skin at the base of the nail is pushed back and only then is it lifted. As for the pterygium, it can also be cut with the sharp edge of the pusher. In this case, you do not need to deepen the tool too far under the nail. Injured skin around the nail will ruin appearance manicure, and at the same time the mood. In addition, nails that have undergone such stress will hurt for a long time. You can start further work with nails only immediately before painting them.

Step-by-step execution technique

To get a high-quality coating, you need to choose sharp and comfortable tools. It is important not to forget to disinfect them. At correct execution of all stages, the French manicure on the nails will hold for at least two weeks. Insufficient drying of each layer can be one of the main reasons for its fragility. It is not worth reducing the overall work time at the expense of it, because as a result, the coating may begin to chip off in a couple of days. Better, on the contrary, to add time for the last (sealing) layer.

It is not difficult to do French manicure on prepared nails.

Whether in the salon or at home, the technology will be the same. It is not always convenient to do a manicure for oneself, and therefore it may require more time. If you do not have enough information, you can refer to the video tutorials of professional nail service masters. In the classroom, many professionals show the ideal execution technique step by step, teach how to perform it step by step correctly.

To work closer, move the top, base, pigments, a thin brush, if necessary, stencils and a lamp. You need to start with the preparation of the nail.

  • Strengthening and removing gloss. At this stage, you need to remove the upper glossy layer from the nail plates. This is necessary so that all layers applied in the future are held firmly and securely. It is on this that the durability of the manicure will first of all depend. Take a buff (soft rectangular grinder with fine grain) and remove the gloss with light movements. Then a dehydrator is used, degreasing the working layer and removing sawdust residues. Now you can start decorative manicure or strengthen your nails. The strengthening process is necessary for thin and fragile marigolds. In addition, it will be useful for nail plates, which rarely rest between manicure.

  • Basic coverage. After removing residual sawdust and oiliness, degreasing the surface of the nails, a layer of base material with a transparent texture is applied to them. This material should be applied in a very thin layer, because the accuracy of the work will depend on this (a dense layer of the product will flow over the cuticle and side rollers). The base is dried in a lamp; the drying time depends on the type of device (from 30 seconds to two minutes). It is important to consider that each applied layer will have to dry when working with gel polish. And each layer needs to be passed along the end of the nail, because the durability of the coating will depend on this. The base may remain sticky after drying, so you should try to avoid accidental touching.

  • Background. With the traditional technique, after the base layer, a camouflage gel polish is taken with the maximum hitting the skin tone. The pigment is applied in two layers, each of which is dried in a lamp. To prevent the composition from flowing outside the skin and evenly spreading over the surface of the nail plate, you need to take a little pigment. At the same time, it is undesirable to send the coating to drying immediately after application: you need to give the varnish the opportunity to distribute over the plate, get rid of the stripes. Since it is rare for novice masters to get neatly to the base of the nail, after the first layer of pigment is dried, they take a thin brush and paint on the edge at the base of the nail with it. This will exclude varnish flowing, and will also allow you to trim the pigmented layer, thereby giving the aesthetics to the coating. After working with a brush, continue painting the nail with a second layer of pigment. The varnish is dried in a lamp.

  • Smile. A smile, which will give the jacket a status, is best applied with special acrylic paint or gel. To do this, you can use gel polish contrasting with the main background. It will be easier for beginners to use templates: depending on the type of stencil, this can be quick and easy. But if the stencil is attached unevenly, the smile will also be uneven. If there is no fear of hand-drawing, take a brush and first draw a thin line with white paint along the contour of the edge of the nail plate. Even a professional's hand can sometimes tremble, which will lead to the formation of a defect. In this case, you can use special means by dipping a brush into it to correct the line. If the work is slow, the drawn line may bleed slightly.

To prevent this, you can remove the residual stickiness after drying the background gel polish. Now you can safely draw the desired line, trimming its width. So you don't have to worry that the material will flow and the line will spread out in width. To achieve better precision in work, it is worth drying two nails in a lamp: the smile will definitely not spread.

  • Sealing. After the smile is dried in the lamp, the sealing must be done. For this, a thin layer of top is applied. The self-leveling material evens out the background coating with a smile, making the step near the smile line invisible. However, if the smile initially turned out to be too thick, you need to use the buff, carefully trimming the smile line in a delicate way. After that, you can apply another layer of top on top. Final drying will be the last step of the job.

  • Decorating. Having understood what the method of performing a French manicure is, you can diversify it by leaving one or two nails for the design. You can not make a smile on them, but instead place a sticker on the accent, transfer the pattern using disposable stencils. The design with a picture will also look beautiful. You can paint anything on such nails: you can even decorate a French manicure with a seasonal pattern. This trend is quite popular today.

Do not cover your smile on top with glitter varnish. From this, a clear contour is erased, the coating may lose its expressiveness. As for mother-of-pearl, rubbing will look more weightless on the background of the jacket. It is applied before sealing, and a smile is made on top of it. A jacket with pearl dust looks especially delicate, today it is considered the best material to create a special background coating effect.

You can quickly and easily decorate French manicure with stickers or the so-called slider design. To do this, after applying the base material and pigment with their obligatory drying, another thin layer of the base is applied to the accent nail. The application picture is placed on a wet napkin, wait 30 seconds, then remove it from the paper backing, apply to the nail on a layer of undried base. The slider is leveled, then dried, reinforced with a base and sealed with a layer of top.

How do I use the strips?

French stencils and strips can be used in different ways today. They are glued, retreating from the edge of the required distance. It is not necessary to press the template into the freshly applied and dried coating. Immediately after covering the prepared area, the strip or stencil is removed, since this cannot be done after drying.

Strips are sold in ready-made sets, as well as rolls. Roll options give only a straight edge, which is far from always convenient due to the peculiarities of the nail plates. The sets are variable in shape and are convenient to work with. Beginners can be advised to use, in addition to the strips, a special silicone agent that protects the skin around the nails from polish. Everything that gets on the film can be removed, thereby increasing the accuracy of the work.

How to make a French manicure with gel polish, see the video below.

For applying varnish. Remove the cuticles, file your nails gently. Remember that after applying the varnish, all the irregularities and defects of the incorrect filing of the nail will be visible. The shape should be perfectly flat. Degrease nail plate using nail polish remover or wipe thoroughly with a dry cotton pad.

You probably won't be able to make it even on natural ones the first time - without experience and skill - unless you are used to drawing small details of pictures with an ordinary artistic brush. So please be patient. In addition to varnishes and, prepare a manicure corrector and nail polish remover.

The outer edge of the nail is often referred to as a "smile". There are several ways to draw such a smile. Use a white gel pen to draw a line that will serve as a border for the application of the white varnish. If possible, use a special professional brush for applying varnish (thin or with a beveled corner). If this is not possible, paint with the corner of a regular brush from a bottle. Smoothly draw a line along the outlined contour from one edge of the nail to the other. Paint over the remaining free area of ​​the outer edge. Do not be afraid to paint the rollers (the skin on the sides of the nail) - this will make it easier for you to draw the corners of the nails.

If you are not sure that you can draw the line of a smile, it is better to use a stencil. Place the stencil strips on your nails. Make sure they fit snugly against the nail plate to prevent polish from getting underneath them. Paint over the outer edge of the nail so that the layers lay flat, without streaks. Wait a little for the varnish to "set", but not to thicken too much. Peel off the stencil strips carefully. The stencil is convenient when you need to outline the contour and paint over the outer edge of the nail without risk, but often glue particles remain from it in the form of a thin film, which is difficult to remove with tools. Sometimes, instead of stencil strips, it is more convenient to use ordinary stationery tape - it leaves fewer marks.

Remove excess nail polish from the skin around the nail with a manicure corrector. To the sharp end wooden stick, with the help of which the cuticle is pushed back, or wind a little cotton wool on an ordinary toothpick, soak it in nail polish remover. Wipe off the remaining adhesive tape very carefully. Correct the smile line without breaking its smooth curve. It is at this stage that patience is required, since the work is almost jewelry. A cotton swab will not work as an alternative for such delicate work. Moisten the cotton wool often, but also make sure that the accidental drop does not blur the already corrected line.

When the edge of the nail is finished properly, coat your nails with clear or pastel-colored French manicure. Remove excess nail polish from cuticles and the skin around your nails. If you want to coat your nails with another coat of polish, wait at least a minute before applying it so that the polish lasts longer.

Nail design is my hobby, I decorate nails in different ways and one of my favorite of course is French manicure.

I myself have read many articles on this topic, mainly nice pictures and there is little technology, I would like to tell you about the technical aspects in detail.



1. Stencils. Everyone knows about stencils, you buy them and stick them on, and then it makes sense to write a review on French manicure. I will not dwell on them in detail, everything is clear here. I hardly use them.


2.Homemade stencils. In fact, you can make them yourself.

  • Household insulation tape or matte can be used sticky tape Scotch (best), plain stationery stickers. You can cut oval stickers from any sticky base, or you can use the tape itself, just the smile line will be straight. If you have zigzag scissors, you can cut wavy stripes and do this kind of fancy manicure.
  • Another method: take an old file from a folder, stick adhesive tape on it, matte scotch tape, even if masking tape and cut out semicircular strips, you can circle the old strip from a purchased stencil, if it remains, leave it on the side a little so that it would be more convenient to peel them off and apply on nails. This is of course a long time, you can simply cut off the tape and immediately stick it on.
  • Scotch tape too sticky. If it sticks tightly and peels off along with the varnish or, on the contrary, leaves glue, then before applying it to the nails, glue the strip to the lint-free fabric, and then on the nails, remove the main stickiness on the fabric.
  • In addition, a bactericidal adhesive plaster works well, use its rounded parts or cut out several stickers from one plaster. It will take five plasters for two hands, or one or two if cut out.


    You can also hide the smile line with rhinestones or sparkles, in fact, any varnish with sparkles will do for this.


    3.Lacquer with a fine brush. If you have a white varnish with a thin brush, you can trace the smile line with a thin line at the first stage, and then fill in the regrown part with a regular varnish. This is one of my favorite ways. It is easy to draw straight lines with a thin brush. This is especially useful for triangular French.


    4. Method with liquid for nail polish remover. Here your hands are trembling, everything is crooked, everything is askew, it's okay. Paint crookedly, take a cosmetic flat brush, dip in acetone or nail polish remover and touch up until smooth. This is especially suitable for those who cannot do evenly with their left hand.


    5.Short nails. French manicure can be done on nails of any length and it looks just as great on nails without any length at all. You don't have to grow your nails.

    You need to apply a thin strip along the tip of the nail, even if there is no regrown part, you imitate it, you just paint over this part of the nail with white. Hands are immediately transformed, a well-groomed appearance appears.


    A few years ago, my friend with nails under the root went to the salon and the master made this imitation of white tips with a thinnest strip for her, and she did not even dream of such a manicure. She walked happy, showed everyone, received a lot of compliments and refused to wash the dishes at home)))

    This method is also suitable for those who have already grown a little, but want to visually lengthen the nail plate, or for whom it is naturally small.


    In this way, you can also save a nude manicure that has begun to rub on the tips.

    6. Gradient... Such a manicure with a gradient looks very gentle on the nails. There are several ways to do this.


    • On clean, base-coated nails, you apply a thin layer with a sponge with white varnish, concentrating it on the tips, and then cover it all with milky varnish.


    • Apply on a sponge white and pink at the same time and apply all over the nail. This is my favorite way. You need to make two layers, sometimes three.
    • Apply milky or pink varnish to your nails, and then use a sponge to work the ends with white.


      You will get a real gradient only in the second way, since this is the only way that white and pink varnish will perfectly blend with each other at the transition border.


      7.Design. Take a pink, dense varnish and paint your nails. Then, with a thin brush, paint white feathers along the grown edge. Drawing them is very simple. In winter, white feathers can be replaced with snowflakes to simulate frosty patterns.


      If you have your stamping plates, there is a lot of creativity here.


      8. White varnish. The denser the white varnish, the better. This is what I am using now. I will not say that I am delighted, but so far these are my favorites.


      9. Milk varnish. I buy milk varnishes all the time, for such a manicure I have been using these recently. Lacquer Sally Hansen Lacquer Catrice


      You can make it yourself. Drop a couple of drops of white into any transparent varnish and stir. Do not add a lot at once, one drop at a time and try on the nail. Dense pink varnish also dissolves well in transparent. It can be diluted separately if there is a small container, so that all the transparent varnish is not wasted.


      Many people use only such a varnish, sometimes it is better to go to bed than a purchased one, because everyone knows how such varnishes "strip".

      At home, you can make your own brush. If you need a thin brush, you can cut the thickness of any brush, even from an old varnish, even an artistic one. A used eyeliner brush works great.


      Most best advice about a brush for French manicure. You need to trim your flat brush in a semicircle. This will solve 90% of the problems for applying white ends. A flat nail polish brush or a flat eyebrow brush is suitable, it is already beveled, it only remains to be rounded. It is best to cut with manicure curved scissors. Before this, the brush must be rinsed with acetone from the varnish and dried, so it will be easier to give it the desired shape.


      If you buy a white varnish with a flat brush, trim it, then you will have a special varnish for the ends, it is very convenient and saves time at times, even when compared with stencils. So at the end of the review, I give you my favorite trick.

Stylish, neat and unobtrusive French manicure can decorate nails of any length. Classic jacket, fan jacket or French manicure with a pattern - you choose the type of staining yourself.

French manicure options - fashion trends

French manicure looks elegant on both short nails and long or nails middle length... It is very diverse and there are many options for its application. In addition, you can get creative with this process and come up with something of your own.

A classic jacket is characterized by staining the edge of the nail in white. This technique is considered fast, so it will be convenient if you do not have a lot of time. Fan-french, in which colored varnish is applied to the edge of the nail, will successfully complement your bright and sensual image.

Several saturated colors highlight the edge of the nail in such a variety of French manicure as a twist-jacket, and the French-millennium involves decorating the tip of the nail with decorative sand or sparkles.

A French manicure with a pattern is suitable for long nails. A drawing or pattern is made at the tip of the nail. A decorative jacket, such as, for example, a jacket with abstraction, is non-standard, but also very actual option manicure.

French manicure for beginners: method number 1

File and round off your nails carefully. With a white pencil, draw a line under the edge of the nail. Remove the cuticle or prepare a bath of warm water and push the skin at the base of the nail with a stick.

Cover your nails with a base coat and wait for them to dry. Apply white varnish to the free edge of the nail, starting from the center and spreading out to the sides. Wait until it dries again, then cover the entire nail with clear pink varnish and let the nails dry completely. Apply lacquer fixer on top.

Applying French manicure: method number 2

Buy special templates with a corner and a round shape from a cosmetic store, or make such templates yourself from thick fabric, electrical tape or tape. File and round your nails, draw a line under the edge, remove cuticles.

Stick the template onto the nail so that its free tip protrudes. Apply varnish white on the edge of the nail in two layers. To keep your manicure neat, remove smudges and bumps cotton swab dipped in nail polish remover.

Remove the template, dry your nails. Cover them with pink or white varnish, wait until dry, then apply fixer.

DIY French manicure: method number 3

French manicure using the ombre technique is a gradient color scheme in which the transition between shades should be as smooth as possible. To do this, choose varnishes of one colors or similar shades, and spread the coating with a sponge so that there are no visible boundaries between the colors. Tenhika ombre is applied horizontally, vertically or diagonally.

Prepare your nails and remove the old coating. Shape the nail surface, steam your fingers in soapy water, remove the cuticle. Apply a base coat and wait for it to dry completely. For the base, choose transparent or white varnishes, but you can experiment with colored ones.

The first layer - a gradient - is applied using a sponge or sponge with light patting movements. It is definitely impossible to apply varnish with a sponge, but this is the trick of the ombre technique, which gives a mixture of colors and blurred borders.

Spread the varnishes with a brush on the foil in the sequence you want to see on finished manicure... Darker shades are best applied at the base of the nails to make them look longer and more effective. Renew to color each nail color palette on the foil. After the first layer has dried with a sponge, the second layer of varnish is applied to the tip of the nail in the same way.

Next, it remains to apply only the final fixing layer, and this must be done even before the final drying of the varnish, since the sponge leaves behind an uneven bumpy surface. The final base can be a regular clearcoat. French manicure is ready!

Home French manicure: shellac

Shellac is a hybrid of nail polish and gel. It is applied like a varnish, but lasts a long time like a gel. Its advantages are that it:

  • easy to apply,
  • does not rub off, does not chip, keeps firmly on nails for up to four weeks,
  • not scratched
  • heals nails, giving strength to brittle nails and flexibility to hard ones,
  • suitable for both manicure and pedicure,
  • harmless, because does not contain formaldehyde, toluene and other toxic components,
  • does not cause allergies,
  • dries quickly
  • can be removed in fifteen minutes using liquid for artificial nails, does not require cutting, does not leave marks on the nail plate after removal.

To fix the gel polish on your nails, you will need a special ultraviolet lamp. Painted nails should be under it for at least a minute. If desired, one color of shellac can be changed to another without cutting.

At home, shellac is removed by soaking nails in acetone. To do this, cover the nail with a cotton pad soaked in liquid and wrap it in foil. After ten minutes, remove the layer of varnish with a wooden stick.

How to apply shellac to your nails

Lubricate the cuticle with emollient cream and remove with a stick. Wash your hands with nail degreaser soap. Dry and polish your nails. Apply a base coat to the prepared surface and hold your nails under an ultraviolet lamp for 15 seconds.

Apply the first layer of gel polish and dry under a UV lamp for one and a half to two minutes. Apply a second coat and also dry it for one and a half to two minutes.