Crafts from cones and plasticine. Crafts from cones and plasticine with your own hands Elephant from cones and plasticine

Many go to the forest for mushrooms, and needlewomen go for pine cones. It turns out that very original crafts are obtained from this natural material. Children of different ages can work with cones, therefore, teachers often use them in labor lessons in kindergartens. In this article we invite you to look pine cone craft ideas and use them for creativity.

Crafts from cones and plasticine

If you haven't found any acorns, use wooden beads for the head. It is convenient to make clothes for your crafts out of felt, since this material does not require additional processing. It is not necessary to use plasticine to fasten parts in crafts from cones; a glue gun is also ideal.

Hare made of cones and plasticine

Turtle made of cones and plasticine

Cone swan

Crocodile from cones and plasticine

DIY cones hedgehog

A hedgehog can be made from cones in different ways, for example, from pine needles and cones. To do this, collect pine needles. It is desirable that they are dry. Form bundles of needles and secure them with plasticine. Insert the resulting needles into the bumps and then trim. If the needles are left long, you get a porcupine. Don't forget to shape the hedgehog's face.

If you use a plastic bottle, the hedgehog can turn out to be of different sizes.

We offer you to see a photo selection of what else can be made from cones:

Cone flowers

A pleasant walk through the coniferous forest can be combined with an exciting activity - collecting fallen cones from pines and firs. From cones of different shapes and sizes and plasticine, you can quickly make a lot of funny and simple crafts for children. The clay will help shape buds that will remind you of familiar animals and plants.

Bee

To make a bee, you need a fir cone, from plasticine - 4 blue or blue wings, three yellow strips about 5 cm long, small white and black balls for the eyes, "horns", a mouth.

We collect the bee. We attach the yellow stripes to the bump. We attach the wings. We attach the white balls in place of the eyes, on them there are black balls. Fasten the horns and mouth.

Dragonfly

For a dragonfly, you will need a narrow spruce cone, from plasticine - 4 narrow wings, a tail, two eyes with pupils and a mouth.

Horse

To make a horse you will need:

1 small spruce cone for the head
1 large spruce cone for the horse's body
gray or brown plasticine
black plasticine
white plasticine
4 toothpicks
woolen threads for horse mane and tail

Roll a cylinder out of gray or brown plasticine - a neck for a horse. Small cone-shaped lumps of plasticine - for the ears. Two balls of black plasticine - for the pupils. Two white plasticine balls - for the horse's eyes.

Make four square hooves from black plasticine. Cut strips of gray plasticine for "sticking" the toothpicks - the horse's legs.

Place the toothpicks in the plasticine strips, seal and align. Insert the resulting horse's legs into the hooves.

Collect the horse. Attach the head to the plasticine neck and fasten it to the body by slightly smearing the plasticine over the bump. Attach ears. Make eyes and attach. Insert your legs.

Cut the strips for the mane and tail from woolen threads as shown in the photo. Divide the cut threads into pieces of plasticine.

Fold the tail threads and secure with plasticine. Attach the tail to the horse.

Make a mane and attach it to the horse.

Pike

To make a pike, you will need a spruce cone and plasticine parts - 3 pairs of fins, a tail, a mouth, white and black balls for the eyes. Apply balls of black plasticine to the fins, turning them into spotty ones.

We collect the pike. We attach the mouth to the pike. We decorate the mouth with a stack. That is, we make it a little open. Making eyes. We attach the fins and tail.

Parrot

To make a parrot from cones and plasticine, you will need:

1 small bump
1 big spruce cone
purple plasticine for wings and feather decorations around the neck
red plasticine for legs and beak
white and black plasticine for gas
multi-colored plasticine for feathers on the head

Sculpt the details for the parrot as in the photo.

We collect the parrot.

Christmas tree

For example, you can make an elegant Christmas tree from a spruce cone. To strengthen the spruce cone, we make a plasticine stand. We decorate the Christmas tree with toys - beads. We attach the beads to the cone on plasticine. You can put a gift under the tree. A gift can be molded from plasticine and decorated with beads.

Penguin

To make a penguin, you will need a fir cone, from plasticine - two black wings, a head, two legs, a nose, two white balls and two black balls for the eyes.

We collect the penguin as shown in the photo.

Lemur

For a lemur, you will need spruce cones - 1 large and 1 small; make a tail, ears, nose, bangs, eyes, paws from plasticine.

We collect the lemur. Attach bangs, ears, eyes, nose to a small bump. Finish the lemur's face with white plasticine. Using a small plasticine neck, attach the head to a large bump - the body of a lemur. Cut the front and back legs in the form of cubes, round slightly and attach. Fasten the striped tail at the back.

Animal

Cones and plasticine make cute crafts - cacti. For example, from a small open cone, a small cactus turned out. A pot for him can be molded from plasticine.

Camel

Bumps of different shapes can give you the idea of creating a more complex craft, such as the camel in the photo below. However, this seemingly complicated craft is assembled in just half an hour. The cones and plasticine bactrian camel in the photo is made of one large cone and nine small cones. In this case, the legs of a camel are made of two small narrow cones connected by plasticine. The legs are also attached to the body with the help of plasticine. On the back of the camel there are two humps - from two small open cones. The neck of a camel, with a slight forward bend, is made of two small narrow cones. The camel's head is a small bump, the eyes are made of black plasticine. Optionally, you can make a brown plasticine tail for the camel.

Deer

To make a deer, you will need 1 large spruce cone for the body of a deer and 1 small cone for the head, twigs for the legs and antlers, from plasticine - neck, ears, tail, hooves, white and black balls for the eyes, nose, narrow plasticine strips for decorating the antlers ...

We collect the deer. We fasten the head and body of the deer with a plasticine neck. We fasten ears, eyes and nose on the head. We attach the legs to the body using plasticine. We insert the twigs into the plasticine hooves. We fasten the tail. We make the horns - we attach narrow brown plasticine strips to the branches. we attach the antlers with plasticine to the deer's head.

Dachshund"

To make a Dachshund dog you need 1 long spruce cone and 1 small cone, from plasticine - eyes, nose, long ears, neck, tail, short legs. We fix a small bump on a large one with a plasticine neck. Attach eyes, nose, ears, legs, and ponytail.

Plasticine squirrels with mushrooms on a coniferous branch with an attached cone.

Turtle

It is very simple and quick to make a turtle. To do this, you need to take a large, but short, open bump, cut off the top of the head or unscrew it by hand to get a flatter shape. From plasticine we make a head and legs with a small tail for a turtle.

Piglet

Piglet made from pine cones and pink plasticine. The muzzle, ears, legs and tail are crocheted from plasticine, eyes.

We insert the bump into the head. We attach the legs and tail.

Crocodile

Swan

Spruce cones make graceful swans. We sculpt the head with the beak and neck of a swan from plasticine. We shape the neck of the swan. We attach the neck with the head to the bump. We make the eyes of the swan and the beak from red plasticine.

Hedgehogs

To make the craft "Hedgehogs in a forest glade" from cones and plasticine, you will need:

Glue stick;
scissors;
colored paper of "autumn" shades (yellow, orange, green);
cones;
plasticine (orange, black, red and white);
box or lid (for a clearing);
pencil;
decorations (sequins-leaves).

1. For the clearing, we need leaves. To make a lot of leaves, fold the paper 2-3 folds and then in half. Mark the outline of the leaf (birch, oak) on the halves with a pencil. And we start to cut!

2. When there are enough leaves, then we begin to decorate the meadow. To do this, apply glue to the bottom of the box and arrange the leaves randomly.

3. When the autumn meadow is ready, start sculpting hedgehogs!
For the face, we need orange plasticine. You need to roll a large ball and attach it to the bump. Please note that you need to fasten it on the side of the cone where the scales have opened. It is the exposed pine scales that will imitate needles.

Then you need to "stretch" the muzzle.
4. We make paws from black plasticine - 4 things. We attach them to the bottom of the cones.
Here is such a blank of a hedgehog turned out with a muzzle and paws.

5. We attach eyes on the face - white balls, and pupils - black balls. Don't forget about the nose!

6. Now that the hedgehogs are ready, it's time to run them into a clearing of leaves.
Hedgehogs love to run through the leaves and look for something on the edge of the forest!

7. You can add berries or fruits to the meadow. After all, autumn is harvest time!
So that hedgehogs can feast on, we make berries from red plasticine.

8. Now you can decorate the backs of hedgehogs with berries and small sequin leaves.

Mushrooms

From cones with plasticine, you can make a mushroom meadow. For this, two open cones for caps and two small narrow cones for mushroom legs are suitable. We attach the mushroom legs to the caps using plasticine. We make a glade from green plasticine. We attach the mushrooms to the meadow.

Vase

Craft "Vase", decorated with a branch with flowers from cones. Draw a vase on a piece of paper. We attach a thin strip of plasticine to the vase. We attach small bumps to it. We attach watermelon seeds to plasticine as leaves. We paint the cones and seeds with blue or other gouache. We decorate the vase with blue and blue crayons.

Hey! Today we have crafts with kids. And, our favorite topic is cones and plasticine animals. Making a doggy!

Crafts with kids.

If you have a lot of bumps, they will do.

Animals made of cones and plasticine

Since, being in the forest, we collected many and very different sizes there, our possibilities in the field of crafts from cones have expanded. And if earlier Masha and I were limited to simple, but very cute a, now we were able to make very cute dogs.

These are the

Making them is very simple, and it turns out very cute. Kids love it! The only frustration is that it doesn't take long to play with them. From too active an onslaught, the dogs immediately fall apart. And that's nothing! But after that you can collect them back! And this is a plus!

Making a dog

We select cones

First, they selected - two large bumps for the body, four small ones for the legs, two smaller ones for the ears. For the tail, we had a paw-like one. And you can have a narrow, long one, if you have one. We didn't find one.

We connect

We rolled a lot of balls to connect the parts. By the way - in order to make the plasticine worse visible, we made it gray-brown-raspberry. Those. mixed in a few dull colors.

The kid sticks balls to details with pleasure.

Then, as it turns out, either the mother attaches the parts in their places, or the baby.
First, the legs, tail to the body, ears to the head, and now we connect the head and body.

Decorate

Our dogs are almost ready!

To make them absolutely beautiful, we sculpt their eyes and nose. And we also blinded the bones!

About plasticine

Plasticine is desirable here so that it is soft at first, and then hardens. It will be stronger. In general, you should immediately come to terms with the fact that dogs are for admiring them :).

Plasticine is very convenient to choose on Ozone. Plasticine is very different here.- both by price and by purpose and features, with descriptions and reviews

That's all about how we make a dog.
Cute dogs and you! And if you can't find the set of cones you need, we recommend it!
Today we had crafts with kids - animals from cones and plasticine.
Thanks for reading!

DIY crafts from cones will be interesting for both adults and children. Among handicrafts made from natural materials, handicrafts made from cones look the most vivid and original.

What kind of craft can be made from cones?

The most interesting option for making cones for children is some familiar animal or bird. Children with special trepidation relate to the little inhabitants of the forest kingdom.

Bump hedgehog on a plastic bottle

Such crafts made from cones will be relevant, because the hedgehog is the most beloved character in exhibitions dedicated to autumn. We take a small plastic bottle with a cork. We paint its upper part with a black marker - this is the future muzzle of a hedgehog.

We wrap the rest of the bottle with a thick cloth. The threads sticking out at the edges can be singed - this will prevent the fabric from unraveling and will give the craft a neat look. We fix the fabric on the bottle with glue.

We glue cones on the fabric in rows. We fill the entire surface of the fabric with cones.

It remains to glue the eyes and ears to the hedgehog! The gifts of autumn - apples, rowan twigs and dried leaves will give the finished look to the craft.

Hedgehog made of cones and plasticine

One of the easiest ways to make a pinecone hedgehog is to use a pinecone to craft it.

Another version of the craft is to make a hedgehog out of bumps and felt. We make the eyes and nose from beads.

Hedgehog made from spruce cone scales and salt dough

You can make a hedgehog from a spruce cone and salted dough. We "disassemble" the cone into scales. We insert these scales into a salt dough base.

Dry the hedgehog a little in the oven.

We draw eyes and a nose for a hedgehog. Our hedgehog is ready!

A bird made of cones and tissue

The cones themselves tell us interesting images. For example, you can make a funny bird out of cones. To make it, we need fabric of different textures, glue and factory eyes.

We glue the canvas wings, beak, tummy and felt legs to the bump. We put the eyes in their place.

Funny cone birds are ready!

Owls made of cones and cotton wool

Pine cones can be used to make adorable fluffy owls. We take cotton wool and insert it between the scales of the cones.

We glue two felt circles.

We fasten factory eyes on felt circles. We glue the beaks.

Pine cone owls are ready!

Paint the cones with golden paint and place them on a small stand.

Pine cones can be used to make a large and beautiful owl for an autumn exhibition. The craft is based on two foam balls, into which cones are inserted and fixed with glue.

Autumn nest with cone chicks

From cones, chestnuts, leaves and twigs, you can make a very effective autumn craft. Using good glue, glue the cones and chestnuts together. This is the future head and body of the bird.

We glue the winged leaves to the blanks.

Leaves - wings

We intertwine the twigs. We should have a small bird's nest. We weave the leaves into the bottom of the nest.

We glue the eyes and beaks to the birds. Our birds in the nest are ready!

Bunny of cones

From cones, you can make the favorite of all children - a bunny. For the craft, you need very little - a piece of felt, a small pompom, factory eyes, a bead and good glue. We glue felt ears and a pom-pom to the bump. We glue the eyes in place.

We glue a bead in place of the nose and decorate the craft with mustache strings. A bunny hare is ready.

DIY figurines from cones

Children will surely like such funny figures and will become a decoration of the autumn exhibition in the kindergarten. By gluing pieces of felt onto the cones, we get adorable chanterelles.

Or squirrels with a nut.

If we paint the buds yellow and attach the ball-heads to them, we get adorable chickens.

A bump, fluffy wire and a few factory eyes will make a funny spider.

Pine cones, felt and felt can be used to make a wonderful winter snowman.

From the gifts of autumn, you can glue the wonderful Serpent Gorynych. Walnuts stick together. Glue a piece of red fluffy wire between the nuts. We glue the eyes on the top nut - we get a head. We make three such blanks. We glue a stick to each head, which we then insert into the bump (be sure to fix it with glue). We glue the legs from walnuts, as well as wings and a tail from dry leaves.

A very interesting idea is to make proud deer out of spruce cones. We make the body and neck from cones. We make the legs from twigs. We make the head of a deer from an acorn. We connect the details of the craft with a glue gun. We make the nose, eyes, horns and hooves from plasticine.

Watch the video on how to make deer from cones:

A very beautiful autumn deer is obtained from cones, twigs and an acorn.

DIY cones topiary

You can make a very beautiful topiary or tree of happiness from cones. We insert a sharp stick into a pot of plaster.

Using a glue gun, we fix the cones on the foam ball. We put this ball on a stick. We wrap the pot with rope.

It remains to decorate the topiary with ribbons and paper leaves. We decorate the pot with shot pebbles and shells. The topiary of the cones is ready!

DIY basket of cones

You can make a very original autumn basket from cones. This craft is perfect for an autumn exhibition in a kindergarten or school. With the help of glue, we connect six cones in a circle - this is the future bottom of the basket.

Now we also connect eight cones - this is the upper part of the basket.

We take the upper part of the basket and glue the cones to it in a circle. We will have a blank from two rows.

On this blank we glue the bottom of the basket, which we made at the beginning. A hole will remain in the central part of the basket, which we will "glue" with a cone.

We wire the cones for the handle. We attach the handle to the basket.

We decorate the basket with flowers and ribbons.

Watch how to make a beautiful basket of cones in the video:

The knobs in the upper part of the basket and the handle can be placed not inward, but outward.

You can make a very spectacular autumn composition from colored cones - a bouquet of flowers.

The buds make an excellent flower lawn.

Christmas tree made of cones

Crafts made from cones can be not only autumn, but also winter. You can make a very beautiful Christmas tree out of cones. We glue a cone out of thick cardboard.