How to properly cut under a square. Haircut Long bob for dark, light, red hair - front and back views

A bob is a classic haircut, which, with minor changes, forms more and more new fashion trends... To trim the bob it is not necessary to go to the salon, you can do it yourself. The main thing is a firm hand and sharp scissors.

  • Step one

Important: when pulling and cutting the strand, you cannot make any effort. A straight haircut means that the hair will lie as it grows when trimmed. Pulling too hard can give undesirable results.

  • Step three

After the front zone is trimmed, you need to move to the back of the head. Can be used long comb or a ruler to maintain the same length throughout the haircut. By combing the back of the hair make sure the hair is not tangled and is completely slicked back. After that, without pulling the hair too much, cut the control row of hair along the perimeter of the zone (row with a width of one to three centimeters). Now you need to move forward and return to the front zone.

Important: when cutting, the scissors must be kept strictly horizontal, parallel to the floor. Otherwise, the cut will be uneven.

  • Step four

Now you need to comb both occipital zones down. Next, using the same haircut method as in the previous steps, trim the hair from back to front. Repeat on the opposite side. After that, you need to trim the left and right zones in the same way, and then the left and right crown zones.

  • Step five

The last step is to trim the hair area above the forehead - the front center area. Part hair with a straight part. Cut in the same way as the previous hair.

  • Step six

After finishing the hair cut, dry the hair. Use the straightening tongs to style your hair so that it is perfectly straight and smooth. If desired, the ends of the hair can be bent inward or outward using tongs or a round brush. Secure the styling with varnish.

The bob that has received a haircut looks elegant, stylish and relevant. A classic haircut can become the basis for many other types of bob: with bangs, graduated, torn, asymmetrical, elongated. That is why the square is so popular - there is a suitable square for each.

Correctly executed gradation of the strands will give mobility and revive the clear edges of the classic square. An experienced stylist can easily determine which technique haircuts will do in each case. This hairstyle is easy to daily care and remains relevant at all times. When performing a bob hairstyle, it is necessary to take into account face type, color, structure and specifics of hair growth.

A graduated bob haircut technique with side strands processing is excellent for women who need to correct not entirely harmonious facial lines:

  • excessively sharp edges;
  • heavy chin;
  • square cheekbones;
  • massive jaw.

For girls with a round or angular face, it is better to use a method for processing the ends. In this case, there will be no additional emphasis on the cheekbones. Graduation with this technique will begin below the level of the chin, which visually stretches the features and brings them closer to the ideal oval.


Graduated bob square with torn ends

The hairstyle is ideal for girls with an oval face and low cheekbones. Young and active women of fashion should choose spectacular options with asymmetry, oblique cuts and various options for cutting bangs.

Note: the larger the facial features, the less often the hairdresser should perform the lines for highlighting the structure of the strands.


Graduated square with lengthening

Hair color and structure

A haircut with brightly highlighted strands requires perfectly groomed ends from the girl. This technique looks organically on straight hair of dark tones with a healthy structure. Owners of light, thin or curly curls are less fortunate. A neat haircut looks on them exclusively after professional styling.


Graduated bob bob with bold contrasting strands and well-groomed ends. Longline and messy (right) haircut styles.

Such a disadvantage of the technique of cutting longline bob is due to the fact that the master uses thinning scissors to give the edges a definition. With this treatment, weak hair exfoliates and puffs up in different directions, worsening appearance styling. With small flaws, the method of point cutting of the strands along the entire length will help to correct the consequences.

Haircut procedure

The haircut technique of a graduated square is basically the same, differences are allowed in the method of highlighting curls and creating tiers. For this, the hairdresser can use a different tool or method of cutting. The order of the hairstyle is as follows:

  1. Hair preparation. Before starting, you need to wash and dry your hair a little. The accuracy of the final result depends on the thoroughness of the combing. Further, it is necessary to divide the total mass into lateral and crown zones. Fasten them with clamps, which will greatly simplify the work and speed up the process.
  2. Determination of length. From the occipital region of the head towards the neck, part of the hair stands out. The cut should be at the back of the growth border. The rest of the curls will be aligned with the control cut. The hair on the back of the head is divided by means of horizontal parting without additional pulling off the strands. The hairs from the temporal and frontal lobes are separated by horizontal parting and cleaved in the crown region.

  3. Shaping. You need to start trimming curls from the neck. Then gradually separate the hair mass with parallel horizontal parting and alternately cut off the strands, gradually superimposing them one on top of the other. You need to move from the back of the head to the side zones, and then work out the crown and bangs. When doing the work, you need to take into account that wet hair looks about 10 mm longer than dried hair. The recommended length of the control strand is 8 cm. But it can be changed at the request of the client or due to the recommendations of the master. It is necessary to set the length before cutting the first strand.
  4. Strand graduation. After finishing the main work. You need to comb your hair in different directions to reveal stray strands or unevenness in the transitions. If necessary, all the shortcomings need to be corrected. To give the hairstyle more structure, it is necessary to highlight individual strands. For this, root thinning and processing of individual curls are performed. This operation is carried out using special scissors or a special technique. The frequency and depth of the gradient will determine the final look of the hairstyle.

  5. Styling. Due to the short length and processed ends, drying and styling will be easy. Hot air will help to add volume at the roots, specialized means or irons. It is better to put the ends of the hair inward. This will do final result more refined. For daily styling, it is better to use styling products. When using heat treatment, the ends of the hair will quickly exfoliate and the hairstyle will lose its well-groomed appearance. If you cannot do without a hair dryer and irons, you must apply thermal protection.

Video: technique for performing a haircut with a graduated bob, and a bob-bob

For clarity, you can see these examples of haircuts.

A bob haircut is loved for its practicality and ease of wear, since it does not require complex styling. Owners of such a hairstyle are often interested in how to make a bob haircut on their own in order to simplify caring for it even more. It will take a little time and skill to trim the regrown strands without visiting the hairdresser.

Varieties of haircuts

A correctly executed square can emphasize the dignity of a person, hiding possible flaws. But for this you need to choose which of the types of haircuts is best suited for this purpose.


The bob is cut in the following options:

  1. Classic. This option is known to everyone; to create it, the hair is cut at the same level. The occipital part of the head remains closed, although the strands there are slightly shorter than the front ones. It can be performed with thick long bangs, which will add mystery to the look. But trimmed above the eyebrows, it will accentuate the playful character. If the classic square is done without bangs, variety can be added with a parting. It can be not only straight, but also asymmetrical and lateral.
  2. Bean-shaped. Similar to the previous one long version, but differs in strands of shorter length, trimmed equally along the entire line. The haircut can be complemented with bangs. Suitable for any type of face and hair, as it looks good even on curly curls.
  3. With lengthening. A characteristic feature of the bob hairstyle with lengthening is chin-length or slightly lower strands in combination with very short hair on the back of the head. The back hair is sometimes shaved to add volume and contrast. If desired, the elongated bob is decorated with a cascade or ladder so that long curls fall beautifully around the neck, framing the face.
  4. Graduated. The hair of this haircut is cut in several rows. This creates a multi-stage effect. She is especially loved by young romantic girls for the "feathers" disheveled in different directions, which well hide the angularity of the face.
  5. On the leg. The square is easy to recognize by the strong volume on the crown and very short strands at the back of the head. The hair framing the face must be straight, so this option is not suitable for girls with curly or curly curls. Of course they can be straightened special means, but in this case, the square will cease to be practical.
  6. Double. Unlike the graduated version, in such a haircut only two layers are cut. The best way for owners thin hair as the top creates the missing volume. If the curls are thick and naughty, deep thinning is used to tame them. Not suitable for girls who do not want to bother with styling every day, because without careful treatment, the haircut will look untidy.
  7. Asymmetric. Distinctive feature it is a combination on both sides of the parting of ultra-short and elongated strands. Asymmetrical, on the one hand, an elongated square hides facial imperfections well, while at the same time emphasizing a beautiful long neck.
  8. An elongated bob is a versatile variety that suits any hair type. To create it, the hair is cut below the chin, but above shoulder level in one line.
  9. A bob for curly hair. The square looks great even on curly hair but on condition correct execution... To give the image frivolity and lightness, you can specially wind straight strands of medium-sized curls.

Haircut bob at home

Having decided on the choice, you can begin to implement it. Of course, complex multi-stage or asymmetric haircuts can be created by a master hairdresser. But simple classic version you can even cut yourself with sharp scissors, a good mirror and a stock of patience.

In order for the result to be pleasing to the eye, you must use the following recommendations:

  1. Hair to be trimmed must be clean. Therefore, I wash them with shampoo in advance and apply conditioner if necessary. If the cleanliness of the curls meets the requirements, we simply moisten them with water.
  2. Divide all hair into seven sections. Three of them are located in the front (temples and parietal region), two separate the crown and two - the back of the head.
  3. We take one of the temporal parts, comb it and separate the strand no more than 2 cm wide. By directing it down, we cut the excess hair. The scissor blades should be parallel to the floor. During a haircut, you should not pull the strand too much, since in a bob haircut, the hair should lie naturally, framing the face.
  4. Next, we trim the occipital and crown parts, acting on the same principle. To make all the hair the same length, use a ruler.
  5. We finish the haircut on the front, parietal zone. If desired, cut off the bangs of the desired thickness and length.
  6. The final step is styling your haircut. To do this, dry the hair, lubricate it with gel or other styling agent and pull out the strands with a special round brush.

The resulting square looks stylish and fashionable, refreshing the face. And knowing that the hairstyle is done on your own will give it a special appeal.

Bob haircut its types and technology of implementation.

At all times, a bob haircut does not go out of fashion, since its types are very diverse: "Classic bob", "Bob for lengthening", "Graduated bob", "Bob on a leg"... In this article we will consider a bob haircut, its types and, of course, the technology of execution.

  • Classic square. Recommended for girls with rectangular shape In styling, create volume on the sides with rounded lines towards the face and volume in the parietal zone. Also suitable for triangular face oval and oval.

Execution technology:

2. We start the haircut from the lower occipital zone, separate the strand of hair with a horizontal parting, determine the length and make a border with a straight cut, this will be a control strand. Remember, the CP will be 20-25 ml shorter than the resulting length of the haircut. Haircut is done on wet hair, do not forget that when drying, the length will become shorter by 0.5-1 cm.

3. Separate the next strand with a horizontal parting and comb to the CP (control strand), the angle of the guy is 0 degrees, make a straight cut using the graduation method directed inward, the length of the strand is 1-2 ml longer than the previous strand. In this technique, continue to cut to the frontal parietal part. Observing the same angle of the brace, we cut the entire occipital zone using the "Strand per strand" method.

4. Now you can proceed to cutting the parietal and temporal zones. In the temporal zone, we separate the strand and cut it to the length of the occipital zone, adding a square line. Using the strand by strand method, we cut the entire section of the hair to the upper vertical parting, in the same technique we cut the other side of the hair. Maintain the length of the hair on both sides of the face by cutting hair strands one at a time.

5. Make a bang according to the client's request. Check the symmetry of the haircut: 1. stand facing the model and comb out the hair lying to the right and left of the vertical parting that separates the parietal zone, forward, compare their length (it should be the same); 2. When combing your hair in different directions, you need to make sure that there are no sudden changes in hair length.

6. For a rounder silhouette, you can profile the length vertically.

2.Square for lengthening. A square with a diagonal forward can be on a leg, the only difference is in the length of the hair. It differs from the "Classic square", edging (the horseshoe of the lower occipital zone goes diagonally forward on the temporal zones) and the parting along which the haircut is performed.

Execution technology:

1. The lower occipital area is twisted into a tourniquet strictly in the middle in the occipital area and cut off.

2. We cut the temporal and parietal zones. By analogy with the technology of the classic bob, only the strands are cut diagonally, the hair length is lengthened towards the face.

3. Graduated square. Big the advantage of this haircut is that it allows you to vary the length of the hair, highlighting or hiding some of the nuances of the appearance. A graduated square can be made for lengthening, ragged, and more strict. You can also play with bangs.

The demand for bob haircuts is gaining momentum! Not the last reason for the popularity of hairstyles is the variety of styling. Curls and curls, straight and side parting, carelessness and elegance - choose according to your taste.

Straight parting for the square

Styling on a square with a short and straight parting is not suitable for everyone. Such stylish styling can only be afforded by girls with the perfect face shape and the right features. Otherwise, the hairstyle will accentuate imperfections. Another important point is the optimal volume. Insufficient volume gives the impression dirty hair... If there is too much of it, the appearance will turn out to be a puppet. Therefore, you need to find a middle ground.

  1. Wash your hair and dry it.
  2. Apply a smoothing spray, serum, or shine to your hair.
  3. With a hair dryer and a large round brush, twist each strand downward. If desired, the tips can also look up. Start styling from the back of the head and gradually work towards the temples.
  4. Brush up the hair at the crown of the head.
  5. If necessary, fix the result with varnish.

Side parting for square

Don't know how to style a square at home? Part it sideways! This is a universal method, which is rightfully considered the most beautiful and successful. The main advantage of the hairstyle is its ability to very skillfully cover up the asymmetry of the face. Tucking a strand of hair behind your ear can help make your look more casual.

  1. Wash your hair and dry it.
  2. Apply a smoothing spray, mousse, serum, foam, or shine to your hair. It will be easier to work with them.
  3. Equip yourself with an iron, hairdryer and comb.
  4. Divide the hair into equal strands and secure them with clips so that they do not interfere yet.
  5. Iron over each strand, pulling or curling the ends. A very interesting method in which one part is twisted inward, and the other outward.

Zigzag parting for square

For thin, rare hair that needs volume, a zigzag parting is ideal.

  1. Wash your hair and dry it.
  2. Apply a volumizing product (foam, powder or spray) to your hair.
  3. Comb all hair to one side and blow dry with a hot hair dryer.
  4. Tilt your head forward and straighten back sharply.
  5. Use a pointed comb to create a random parting. It should at least remotely look like a zigzag.
  6. Fix the result with varnish.

Corrugated square

This styling option looks very nice. It can be safely done for parties and work. And most importantly, you will achieve maximum volume without overworking.

  1. Wash your hair and dry it.
  2. Apply a heat protectant to the hair, as well as foam or mousse.
  3. Divide the hair into several thin sections.
  4. Use a special ribbed ironing pad or tongs to work through each strand.
  5. Crimped curls can be left loose or pinned up.

How to put the square back?

Another easy way to create the look of an elegant lady.

  1. Wash your hair and dry it.
  2. Blow dry the strands by brushing back and tucking the ends either inward or outward with a round brush.
  3. To keep the styling, spray it with varnish.

Disheveled bob

Careless styling of a square with lengthening looks very sexy. It's not difficult to create it - 15 minutes is enough!

  1. Wash your hair and dry it.
  2. Apply any styling product to your hair - foam, mousse, or spray.
  3. Bend your head forward, dry the strands with a hairdryer, squeezing them tightly with your hands.
  4. Raise your head and gently smooth out the curls.
  5. Secure them with varnish.

A diffuser will also help in creating such a hairstyle - this is a special nozzle with "fingers", which is sold complete with a good hairdryer.

How do you like this Beach Curls styling?

Curling on a bob haircut

If you want to do styling on a square with curls, prepare "tools" - a curling iron or curlers. With their help, you can make light waves on the strands or cool curls.

  1. Wash your hair and dry it.
  2. Apply any styling product to your hair - foam, mousse, or spray.
  3. Divide the hair into several thin strands.
  4. Wrap each of them on a curling iron or curlers.
  5. Wait a quarter of an hour if you chose curlers.
  6. Spread your curls with your hands.
  7. Spray the styling with varnish.