What can be done from beads with your own. Best Bead Crafts for Beginners

If you want to make a brooch with your own hands, use beads for this. The same material will tell you how to decorate eggs for Easter, make a picturesque tree.

How to make a tree from beads?

As a result, it will turn out to be so refined, iridescent. For creative work, you will need the following materials:

wire;
beads-cut or green bugles;
beads are white and yellow or red and pink;
floss or silk thread;
floristic tape;
PVA glue;
brown acrylic paint;
gypsum.

A suitable glass container, such as a vase, deep rosette or candlestick, can be used as a stand.

The first tree element we will create is a leaf. For it, you need to cut off a piece of wire, string a green bugle on it, using the French weaving method.

How to weave from beads using it, the diagrams will tell you.

For our leaf, you need a piece of wire about 30 cm long.At one end of it, make a small loop and twist the wire in this place 3 times.

From the other end, string beads for the center of the sheet. In this photo there are 5 of them, and for our leaf you will need two pieces.

Begin folding the wire almost in half, but not completely. Insert three fingers of your left hand into the resulting loop and twist the wire in this place, as shown in the second figure.

As you can see, the example has two columns of images. The right one will help make a round piece of paper, and the left one will make a pointed one.

Follow the element based on the left column hint, disregarding the numbering.

Now string 4 beads onto the top end of the wire for our sheet. This row is considered the first. Bend the working end of the wire at this point so that it makes a 45 ° angle with the center piece.

Now bend the working end of the wire as shown in the figure under number 9 in the left column. String 4 beads on this part of the wire, twist. Now string 7 pieces of beads, twist the wire in this second top row and do the second bottom row, also stringing 7 beads.

Here's how to weave leaf beads. For beginners with diagrams, it will be easier to understand the intricacies of the process. After you have made 50-100 such blanks (their number depends on the size of the tree), start making flowers from beads.

They master using the loop method. You will need to make blanks consisting of two circles, in the middle there will be 5 beads. Will help you to make beaded flowers schemes.

Next, make a stamen for each flower. Cut a piece of wire, string 5-6 beads on it, twisting the wire under each and leaving a distance of 1-1.5 cm between them. Insert these blanks in the middle of the flower.

Assembling the product

We start doing this with the branches.

Collect the shamrock by attaching one leaf to the top of the wire, and two on the sides, slightly stretching them, pressing them on both sides with your fingers. Wrap the wire with floss or thread. Make 3 of the same elements, connect them and also drape the wire with brown thread.

You will alternate such blanks with a flowering branch. For her, you need to connect 2 shamrocks and 1 flower.

Now you need to collect the main branches of the tree from beads. To do this, twist the flowering branches and shamrocks in pairs. Then wrap the wire with floral tape.

Speaking about how to make a tree from beads, you need to tell that first you will compose all the branches. Dividing them into 2 or 3 groups, and then put gypsum in a prepared glass container and put branches in it.

Wait for the plaster to dry. To prevent the tree from tilting, place it for this time in a place where there is no strong wind, and no one will touch it.

After that, you need to give the texture to the trunk. Add PVA glue to gypsum, mix to get a viscous mass. Apply it to the barrel, giving it realistic bumps and roughness. When this solution dries well, beaded trees, or rather their trunks, are covered with several layers of acrylic paint, and then varnish. Make sure that each previous one dries well, only then apply the next one.

Here's how to make a beaded tree. Now it can be put in the most prominent place so that it decorates the house and delights the family and visiting guests with its irresistible appearance.

Faberge eggs for Easter from beads

They can be made for Easter and thus decorate the house. This handmade creation will be a wonderful gift not only for this holiday, but also for any other joyful event.

egg;
refractory ladle;
candle;
glue "moment-crystal";
PVA glue";
clip;
needle;
beads;
threads.

First you need to carefully remove the contents from the egg. To do this, in the center of its sharp end, make a small depression, for example, with a needle, and on the other side - a little more. Holding the egg like this, blow out its contents.

Rinse the inside gently by blowing out water. Now cover the small hole with a piece of paper. Cut the candle into pieces and melt it in a ladle.

Pour the paraffin wax inside the egg through the large opening.

Please note that, as it solidifies, the paraffin decreases in volume. Therefore, after waiting, top it up to the very top to fill the Easter egg.

Since the glue does not stick to the paraffin, scrape off the excess mass with a knife and cover the hole with paper, which will adhere well to the wax that is still plastic, not completely hardened.

Use nippers to break off the curved top of the paper clip, thread the needle into a knot. Attach it to the center of the blunt edge of the egg, fix it with a staple from a paper clip.

Pour the beads on a flat plate, string them on this thread, 10 cm each. Pump the glue onto a small area of the souvenir egg and arrange the beads in a spiral.

When the thread comes to an end, cut it near the needle, glue it. Secure the end of the next thread with glue next to it and continue stringing the beads.

To create a symmetrical ornament, from the middle of the egg, type the colors in reverse order.

This is how the beading of an Easter egg takes place. If you have materials left, make another or more souvenirs. To do this, you can mix the beads and string them in a chaotic manner, or make the upper and lower parts such, and the central one of 2-3 symmetrically distributed colors.

Here is another simple option for weaving with beads, for beginners and children it will not be difficult to make such a charming insect.

How is a beaded butterfly made?

To work, you need the following materials:

wire, 30 cm long;
beads of different colors;
2 beads of dark color for the eyes.

Good lighting is essential to work effectively. To keep your eyes from getting tired, periodically do gymnastics for them. You can pour small beads into an empty candy box with a fleecy cloth on the bottom.

They will tell you how to make butterflies from beads of the scheme.

String one light brown bead onto the center section of the wire. Then run the ends of the wire towards each other, put the next bead on them. It will help you understand how a beaded butterfly is made at this stage, a weaving pattern.

Thus, continue to create the torso down to the lower wings. At this point, separate two pieces of wire, string 18 pieces of colorful beads on each of them. Bend these sections in the form of a drop, as shown in the diagram, thread both ends of the wire through the fifth bead on the body, and the lower wings of the butterfly are ready.

String a light brown bead on both ends of the wire, it will be the sixth bead in the body. Now cut the wire in two again, string 24 beads on the 1st and 2nd edges, bend these sections in the form of upper wings, pass the ends of the wire through the sixth bead of the body.

Weaving a butterfly from beads will soon be completed. In the meantime, you need to create her eyes. On each end of the wire, string a dark bead, twist the wire, put one light brown bead on it. Twist the two ends of the wire together for the last time, bend their edges in the form of an insect's whiskers, which are 5 cm long.

How the weaving of a butterfly from beads is completed, the schemes also clearly demonstrate. When you have mastered such an easy way to create a beautiful insect, then you can move on to a more complex one. Patterns will also help you to weave such butterflies from beads.

DIY brooches

How this beaded butterfly is made, the master class clearly explains. For her you will need orange, red, black and yellow beads.

Cut a wire about 30 cm long.Find its middle, string a black bead here. Twist and string the next black bead onto the wire. Twist again, put on 2 beads, and then two more. The diagrams also clearly demonstrate how the body of a butterfly is made from beads.

Figure b shows how to start creating her body. The diagram "c" shows that then you need to tighten the wire so that the beads fit tightly to each other. Bring the ends of the wire up, and bend them in the form of insect antennae.

Look at diagram "d". This will help create the upper left wing of the butterfly. Also bend a piece of wire, string an orange bead on it, intertwine the two ends of the wire, string 2 orange beads in the second row. The third row consists of 3 pieces - red in the center and two orange beads on the sides. Also referring to diagram "d", you will create the left upper wing completely.

Then pass both ends of the wire through the body of the butterfly, bring them through the other side and, relying on diagram "d", create the upper right wing. Diagram "e" shows how to shape the upper wings. Now we will deal with the lower ones, we also begin to weave each of them from the corner.

For the lower right, string one red bead first, then two red beads in the second row. The third row consists of red, then there are three orange and 1 red completes this row. After the lower right wing has been created, bring both ends of the wire through the torso in the opposite direction and make the lower left wing.

If you want to turn a bow tie into a brooch, then attach a fastening pin on the back, and an elegant decoration for any outfit is ready.

Another scheme will help create an insect of green or another color.

This is how a beautiful beaded butterfly is made. For beginners, diagrams, descriptions and photographs will help simplify this process, make not only insects, but also a voluminous tree, an Easter egg.

Watch a video that clearly shows how to make such interesting crafts:

Weaving from beads is a very entertaining, interesting and exciting activity. Moreover, the result always comes out so beautiful, even novice needlewomen will admire their creations. The beads themselves add beauty to the product if it is correctly selected. In the article, we will analyze in detail do-it-yourself bead crafts, schemes for beginners, flowers and beautiful compositions from them. And also, you will find here tips on the choice of material and the weaving process.

Looking ahead, it is worth noting that bead crafts are quite simple to perform, but they require accuracy and concentration, since the work is carried out with rather small material.

For beginners, we suggest mastering the technique of weaving flowers. They can always come in handy individually. For example, to decorate any items and accessories: bags, photo frames, jewelry boxes, necklaces, brooches and so on. And you can collect a bouquet from them or make amazing plants in pots, similar to real ones. It is worth decorating the interior with such crafts or giving it to friends as a souvenir.

It can be cute violets, luxurious orchids, roses, even amazing hyacinth inflorescences. Having mastered several techniques and the essence of weaving, you can fantasize and create enchanting compositions from such an amazing material as beads.

Be very responsible in the choice of material for manufacturing. Sometimes beginners are advised to choose the simplest, cheapest beads. But we think this is wrong. If you compare good, high-quality beads with the cheapest, then even an inexperienced hole will see the differences not in favor of the cheap material. Good Japanese or even Czech beads are straight beads with smooth edges, all the same size and color.

A product made of such beads will be neat even in the inexperienced hands of a novice craftswoman. Therefore, opt for good, decent material. It is best to buy Japanese Toho beads, but they are quite expensive.

Prepare beads in several shades for the flowers and leaves themselves.

To create flowers, you need a line for beads and a needle. These are special materials that are sold in craft stores, where the beads themselves are. A thin wire that holds its shape is also useful, you will find it in the same place.

In addition, you will need pliers and wire cutters. You can purchase two hotel instruments or one that combines all the functions.

Before work, the beads should be poured out of the bags into containers, from which it will be convenient to take the beads. For this purpose, nylon lids for cans or any containers with low sides are suitable.

For those who decided to master the skill of weaving from beads and create simple crafts, flowers with their own hands, the article below provides diagrams and descriptions of the entire process, but before starting the process, it is worthwhile to properly prepare and choose the material.

First, choose good beads. To start mastering this type of needlework, many will consider it sufficient to buy cheap Chinese beads. But this is a delusion. Take good beads right away. They themselves ask for work and inspire the creative process. Any work done with good material will look decent.

So, what should be the beads: even, slightly flattened at the holes. It is these beads that will fit smoothly and beautifully in the product.

Now let's talk about wire, this is a very important element of beadwork. Beads are strung on it and fastened to the product. Take the wire of medium thickness. The thin one will not correctly keep the intended shape of the details, and the thick one will distract attention and disrupt the harmony of the created miracle.

All materials for this type of creativity are sold in specialized departments for needlework and can be found in sewing accessories stores.

To work on creating crafts, you need to use the diagram. It has its own for each type of flower. After several elements have been woven, they need to be assembled together. This will create a beautiful and solid craft.

We start the creative process

Before work, you need to prepare everything. This preparatory step should not be neglected. It is very important for the correct organization of the creative process.

So, what needs to be done and how to organize the place before work:

Place a light, non-slippery cloth on a flat work surface.
Choose only those beads and those colors that are required for this particular job, arrange them in piles, according to color, on a flat, fleecy surface so that the beads do not roll and slip.
Prepare small pieces of fishing line (if you plan to make flowers from fishing line) and wire. They need to be cut with sharp small scissors.
Prepare a clear scheme that you need to work out in advance, and mark all the colors for this or that element.

When all this is done, feel free to get down to creativity. The following are detailed descriptions of the schemes and the process of working on flowers from beads, in stages.

Schemes and description

Now we will consider step by step how to create crafts from beads with our own hands, color schemes for beginners and detailed photos of the process of working on them.

We offer to make an amazing craft - a pot of roses. To do this, we will analyze in detail how to weave a rose flower. And already when you have made several such buds and leaves, it will not be difficult for you to collect them in a bush and fix them in a decorative pot. Now about everything in detail.

The Rose. Master class with photo

For work, we need to prepare beads of two colors. For the bud, take pink or red, you can yellow, whatever you want. For stems and leaves - green.

Now follow the diagram in the photo and do everything carefully, slowly. Do not string the beads too tightly over the wire or space.

First, you need to form 3 loops with strung beads of the color chosen for the bud. There are 9 beads for each loop.
Now add a couple more beads and insert the edge of the wire into the center bead and drag it through.
Now we pass the wire through the outer loop and 7 beads, fix the petal at the bottom.
We've got 5 petals, we connect them and twist into a bud the one inside.
Now we weave leaves from green beads as shown in the photo. This is a French weaving technique. We attach the leaves to the bud from below. We fix it with wire.

Here is our first bud ready. Make several of these buds and large green leaves to frame the composition. Collect all the sprigs of roses in one composition and set it in a decorative small pot, fixing it on gypsum or foam rubber inside.

Such a pot of roses can take its rightful place on the shelf in the room and decorate the interior.

Chamomile with a description

And now we propose to make daisies from beads:

Take white and yellow beads, as well as wire.
Do not cut the wire from the skein; place white beads on it. You need to collect so many beads so that you get a length of 40 cm with the selected beads.
Now we form the loops of the chamomile petals. The length of each loop is about 2 cm. Fold the edge of the wire with beads and twist the wire to form a loop. So we make 9 loops.
Now it's the turn of the yellow center. Take a 10 cm yellow wire and yellow beads. Put 10 pieces on the wire and form a loop, then dial 5 more beads on the other end and thread them into the loop, twist the wire.
Now we collect the flower. Stick a wire with a yellow center inside the white loops and twist the wire at the bottom of the flower.
For chamomile, you can make simple leaves and screw them to the stem
The daisy stalk can be wrapped with green tape or green duct tape.
Make some of these daisies and place them in a vase.

Chamomile weaving pattern

Violet: weaving the flower itself and green petals

Now, let's try to make a violet flower. From beads, it turns out to be of magical beauty. For work, we will need to prepare lilac wire and beads for the flower petals, yellow for the middle, green for the leaves.

First we make a flower. For ease of use, pick up a lot of beads on the wire at once, without cutting off its end from the hank, work with the beads that are on the wire.
We form the first petal as follows: take 6 beads, make a loop, then, around the loop, another loop around. This is one petal.
Push the beads quite tightly to each other.
Make several of these petals for one violet (5-7 petals), simply forming and twisting loops together.
For the middle, cast 8 yellow beads on the wire and make a loop. Make the second eyelet in the same way. Twist them together and stick them inside the violet flower. Twist the wire at the bottom.
The stalk can be wrapped with green tape or green duct tape.

You can make several such flowers for one composition. You can independently vary the size of the flowers by increasing or decreasing the number of beads in the petals and the number of the petals themselves. For the middle loops, you can also use more or fewer beads.

Night lilies - earrings with flowers from beads

Flowers made of beads and beads are good not only for interior decoration, but also for creating jewelry. We suggest, following the instructions and diagrams, to create earrings with beautiful flowers from beads with your own hands. As an example, night lilies are described, but any flower can be used for earrings by attaching it to the hooks, as described below.

To work on these earrings with flowers you will need:

Beads size 11 and 15 in different shades: purple, silver, as in the photo or any that you like.
Rhinestones in the studs for the middle of the flower.
Monofilament and bead needles.
Earring fittings: ear wires and connecting rings.
Pliers.

Let's get down to the creative process:

First, weave the middle purple petals. Do everything according to the scheme and photos given below.
We weave all 5 upper petals, connect them and move on to the lower silvery petals, weave them also according to the pattern, without changing the thread.
We get a two-layer flower. Sew a rhinestone in the middle with the same thread.
We attach the hooks for the connecting ring to the edge of one of the petals of each flower.

Earrings with beaded flowers are ready. The same flower can be glued to the base for a brooch or hairpin, or decorated with a string of pearl beads.

Mimosa branch

Another flower option for those who have little experience in working with beads is a mimosa branch. The following describes in detail how to make a fluffy and spring mimosa twig with yellow inflorescences and green leaves. Let's take for work:

Green seed beads # 15, yellow seed beads # 8 and 10. Green seed beads can be translucent and yellow beads matte.
Wire of copper and green shades of 0.2 mm.
Green silk thread.

Getting started:

First, we make green leaves. We string the beads on the wire as shown in the pictures below. We make the twigs separately and collect them into a leaf.
After we collect the inflorescences, as in the photo below.
We connect twigs with flowers and leaves together.
We decorate all twisted wires with a green thread, winding them from top to bottom in a spiral.

The twigs can be made separately for a bouquet, or you can collect several ready-made mimosa branches into a spring tree.

Working with beads is quite difficult because of the size of the beads, but interesting, since we see the result quickly, and it is always pleasing to the eye.

The main thing in this process is not to rush, to do everything carefully and tightly to press the beads together.

Make green petals for the violet and collect them in a bouquet that can be set in a pot. This bouquet may contain several large and several small flowers. Arrange the composition around with leaves. So the violets will be like real ones.

To better and more clearly understand the process of weaving crafts or flowers from beads with your own hands, watch the video for beginners, where the schemes and work are described in detail.

Did you know that beads are considered a unique material from which you can create completely different crafts. Indeed, even the most unremarkable thing decorated with bright beads looks very pretty. In some cases, beads help make things festive.

It is better to make beaded crafts with children who have reached preschool age. Surely girls and boys will love this activity. Therefore, in this article, we decided to show you the simplest DIY bead crafts.

Weaving from beads is a very exciting activity. The guys who start doing this at first weave bracelets or animals from beads. But over time, children’s skills improve. They begin to understand patterns and learn to weave more complex crafts. On the Internet, you can see many patterns that are intended for all bead lovers. With the help of these schemes, the child will be able to independently make original gifts for their loved ones or elements of festive decor.

Beads and simple crafts from it

If you are planning to do beadwork, then you should definitely look through all the beaded crafts that you can do yourself. If we talk about the simplest crafts, then you should take a closer look at the little animals made of beads. In general, buy bright beads and fine wire and start creating something interesting. To create animals, beads are usually used that have the same texture and the same color. However, not everything is so categorical here. There are exceptions in this case.

If your child is interested in beading, then offer him schemes through which he can make beautiful animals.

How to make a cute dragonfly out of beads.

The dragonfly that you see in the photo can be made by every person who only recently got acquainted with beadwork. In order to make such a craft, you must prepare:

orange and gray seed beads # 11,
a piece of wire 50 cm,
a pair of bulky black beads.

Progress:

It is best to start such a craft with weaving the head. You should put some beads on the wire. But it should be done in the following order: first, a large black bead, a gray bead, again a large black bead, and then 3 gray beads. Place the beads in the middle of the wire.

At the next stage, it is worth putting on 4 more gray beads on one end of the wire. It is worth doing the same with the second end of the wire.

The next row must be woven in exactly the same way. However, on the next row, it is worth wearing 5 beads, which are gray.

Now it's worth making dragonfly wings. At this stage, it is worth putting on 26 orange-colored beads on each end of the wire.

After that, the end of one wire with beads should be threaded from one side into a bead of the same row. The part of the craft should be tightened in order to make a wing.

You must do the same with the second row.

Now you have 2 wings ready. At this stage, you should also weave another row of the torso. To do this, use gray beads. Put on these beads on one side of the wire. At the same time, the second should be threaded using the counter weaving.

If you have weaved the torso, then you should weave a couple more wings from beads. This should be done in the same way as you did the first pair of wings. But here remember that for the second pair of wings you should use 23 orange beads on each side.

You should now finish your craft. And up to weave the torso. Gray beads should also be used here. It is worth stringing it in rows:

in the 6th row - we use 5 beads,
in the 7th row - we use 4 beads,
in the 8th row - 3 beads,
from the 9th row to the 21st row we use 2 beads each.

Now it's worth finishing the weaving of the dragonfly. To do this, thread one end of the wire through the penultimate row of beads. In this case, both ends must be brought out to the same side. We twist the ends of the wire and just cut it off. See the progress in pictures. Surely, you will be able to make a similar craft in a short period of time.

Beaded bracelets. We do the simplest ones with our own hands.

Basically, people like to weave various bracelets from beads. Therefore, if you are looking for bead crafts for beginners, then you should pay your attention to bracelets. And now we will offer you the simplest options.

If you decide to do something interesting, then you can weave an original bracelet. Moreover, you will need to spend a small amount of your time on this activity. To create a nice bracelet, you need to prepare:

of course the beads themselves, which will have a different size and different color;
memorial wire,
small pliers.

So, first of all, twist the wire in a spiral. Your hand should freely enter this spiral. You should make a loop at one end of the wire. For this case, you will need pliers. Remember that such a loop will not be able to release the beads from the wire.

As soon as the loop is ready, you need to randomly put beads on the wire. This should be done until the wire is decorated with these beads.

If you have finished making your bracelet, then finishing the weaving of the bracelet is worth a loop.

As a result, you can get such a nice bracelet that you will wear constantly. Girls will mostly like to weave such bracelets. But boys can also join such an exciting activity.

Finally

Here you could see all the bead crafts that you can make with your own hands. All of these ideas are good for beginners. In general, create an interesting business. Such an activity will surely give you maximum positive emotions and great mood.

If you have free time and a little patience, then beaded crafts will interest you. Since you can create various crafts from this material with your own hands: jewelry, decor items, embroidery, mosaics, key chains and much more. In this article, we will tell you about several options for DIY bead crafts for beginners, children and experienced craftsmen. Let's now take a look at our craft options and try to make them.

Beads 2.0 program for creating patterns of knitting and weaving with beads!

Anyone who wants to weave something of their own from beads, or, perhaps, even create a pattern for embroidery / weaving from a photograph, should try the Russian-language program "Beads 2.0"!

Here is the program's website, where all its features are described in detail: programma-biserok.ru

But in a couple of words I’ll state it.

Firstly (and this is its main purpose), with the help of "Beads" in a couple of seconds from any of your photos or pictures you can create a full-fledged pattern of embroidery / weaving with beads! There is no need to embroider other people's ideas of ornaments or according to someone else's schemes - now you yourself can realize any of your ideas, any drawing, or even embroider a photo!

The most important thing is that after creating the pattern, the program will indicate the specific catalog numbers of the Preciosa / Gamma beads required for embroidery / weaving of this pattern. You just need to come to the store, buy the necessary beads according to the list provided by the program - and you can get to work even today!

With "Beads" you can either create a scheme from a photo / picture, or draw your own plot from scratch. The program provides the ability to fully manually edit any scheme created "automatically". When creating, you can choose the type of the future scheme - a regular one or a brick scheme. If you plan not to weave your work, but to embroider it on fabric, the program always provides a full-fledged pattern for printing on fabric. Everything is as in the purchased set!

The program has an interface entirely in Russian, the installation of the program on the computer is performed "in one click", in addition, the program has a built-in Russian-language instruction, and you can always contact technical support on the program's website for help (or even call them at the toll-free number 8 -800 listed on the website).

In general, if you ever had an idea to embroider or bead something of your own, I advise you to get acquainted with the Beads program.

DIY beaded birch

Now we will look at how to make a birch out of wood, which will then serve as a decoration for your interior. Let's get down to the DIY process.

You will need:

Fine wire (0.3)
Medium wire
Green beads (3 shades)
Beads yellow
Scissors
Crepe paper white
Foil
Putty
Brush
Paints
Decorative moss

Progress:

We need to mix all the beads in one container.
Cut off a piece of wire (about 60 cm) and make a loop on one side, twisting it so that the beads do not fall off.
Now we string the beads on the wire in a chaotic manner. We lower the wire into a jar with beads and string the beads with piercing movements.
The length of the strung beads should be approximately 15 cm.
Then we separate 7 beads from the total mass and drag them to the extreme part of the wire. With a twisting motion, close these 7 pieces with a loop, with a twisting motion. So you need to make about 5 turns.
We do it in a similar way with all the remaining beads on the wire, observing the distance between the loops of about 1 cm.This will be our twig. We need about 60 of these branches.
From these blanks we make full-fledged tree branches, collecting several pieces and folding at different levels. To do this, take 3 branches and connect them together by fastening and winding them on a common wire of a slightly greater thickness.
Cut the crepe paper into strips about 1.5 cm wide. Wrap the wire of our branch so that it looks like the bark of a tree. Use glue to fix it.
We do this with all the branches.
We start to shape the tree. We take a thicker wire, it will serve as the basis for the tree, and fold it in half.
We begin to attach the branches of the tree to the wire, securing the branches with tails. We do it with a swirling motion.
So we attach all the branches to the trunk.
We close all the branches with foil.
We dilute the putty and put it on the base for our tree.
Place the tree trunk in the mortar and level out the mass. Place any object underneath to secure the tree.
Now apply the putty solution to the barrel. Better in two layers to make it thicker.
When the solution is frozen, paint it with white paint. Use black paint to make specks on the trunk.
Remove the foil and straighten out the branches of our tree.
Glue moss to the base for the tree so that it looks like the ground where the tree grows.

Video how to make a birch from beads with your own hands

Craft "Apple"

For beginners, such a craft will be interesting. You can do it yourself, because the assembly scheme is simple. You will have a good evening with your favorite pastime. Let's take a look at the step-by-step diagram that we have prepared for you.

You will need:

Beads of red, yellow and green
Thin wire
Scissors
Fishing line

Progress:

This craft must be started from the bottom. We string 3 beads on the line, after which we begin to make rows in the following sequence:
1 row - 9 pcs.
2nd row - 12 pcs.
3 row - 14 pcs.
4 row - 17 pcs.
5 row - 17 pcs.
6 row - 16 pcs.
7 row - 15 pcs.
8 row - 12 pcs.
9 row - 9 pcs.
You need to start weaving from left to right.
The craft ends with an apple tail. It is made with three beads.

Christmas toys

A garland of beads and discs can be used to decorate the room for the new year. Children 4, 5, 6, 7 years old will cope with such a craft. It is simple in execution, but it looks very unusual and elegant. It can be used to decorate both a children's room and a living room.

You will need:

Beads of different colors
Old disks
Fishing line

Progress:

To make this, you need to cut the disc into even small squares.
First of all, a piece of a disk is strung on a fishing line, followed by 6 beads of different colors, then again a piece of a disk.
You need to repeat this at least 10 times so that the Christmas tree toy looks dignified and beautiful. At the top of the craft, you need to make a loop. Great bead trick for beginners.

Mobile phone suspension

You can decorate your mobile phone with a pendant made of beads and beads. It will be a great decoration, you can also present it as a gift to your friend or mom. Making such a craft with your own hands is very simple, just read the step-by-step instructions.

You will need:

Beads blue silver
Fishing line
Swivel with loop
Scissors

Progress:

Cut a piece of fishing line and fold in half.
We string 2 blue beads on one side of the fishing line, and thread these beads with the other side from the other side.
Next, string 2 silver beads on each side of the line.
Then again you need to string two blue ones piercing them with fishing line from both sides.
Repeat all the steps until you get the desired length of the craft.
Now let's finish it off by stringing 3 silver beads on each side of the line.
Attach a swivel with an eyelet to the tip of the workpiece so that the pendant can be attached to the phone.
In the same way, you can make various pendants, changing the colors of the beads and the ways of weaving.

Beaded snowflake

In winter, you can decorate windows or a Christmas tree with such a craft. It can be made in various shapes or sizes, it all depends on your imagination. Now let's look at the snowflake step-by-step instruction diagram that we have prepared for you.

You will need:

Beads blue and transparent
Wire

Progress:

Cast on 4 transparent and 1 blue beads, then 2 transparent and 1 blue.
Now step back 15 cm from the beginning and pass the end of the wire in the opposite direction through the last 3 beads (2 transparent and 1 blue). Thus, we do it two more times.
Now type 1 blue, 3 transparent, 3 cyan, 3 transparent. Now we draw the tip of the wire into the first blue bead, so a circle is formed.
We repeat step 3, only with the second end of the wire.
Now we pass the wire back through the 4 transparent ones.
We type: 1 blue, 3 transparent and go back.
Repeat step 6.
On the long side of the wire, string 4 transparent, 1 blue, 3 transparent, 1 blue. Hold one part with your hand, and for the second, dial 6 white ones.
Pass the wire through the last blue bead to form another circle.
Next, we type 1 blue, 6 transparent and make a ring. Now one more ring.
Pass the wire through the blue, 3 transparent and the next blue.
Cast on 3 more clear beads and pass the wire through the first of the last two blue beads. We got one piece of a snowflake with two branches.
Now we repeat these 5 parts.
We fasten all the blanks neatly in a circle with wire and we get a six-pointed snowflake.

Video master class snowflake from beads

Brooch "Dragonfly"

If you love jewelry, then I would like to suggest that you make a beautiful beaded brooch in the shape of a dragonfly with your own hands. Its implementation principle is very simple, such a craft is designed for children and beginners.

You will need:

Wire
Beads yellow and green
Large green bead - 2 pieces
Pin

Progress:

Collect the green bead, then the bead and the bead again.
Next, string the green bead again and pass the other side of the wire through it. Now bring it down to the middle.
We make paws. Place a green bead on one end of the wire and secure it with a twisting motion. In a similar way, we make the foot on the other side.
To make the wings on one end of the wire, we need to string yellow beads, at the beginning we need to string it alternating with 3 green ones.
We fix the wing by twisting 2 wires together.
We also make the second wing.
We need to make the bottom wings. They are made in the same way as the upper ones, only in a smaller size.
For the torso, we need to string a green bead on both wires.
We make the lower legs in the same way as the upper ones, only a little longer.
Take a pin and unfold it.
String 6 green beads onto the pin and reshape it.
Pass both sides of the wire through all the beads on the pin.
Next, string 7 more beads on both wires and close the craft by passing the end of the wire through the last bead again. Do this several times.
The brooch is ready!

Video how to make a brooch with your own hands from beads

Beaded necklace

I want to offer you another decoration option, but in the form of beads. They are made very simply, but they look very unusual and beautiful, like a plait harness. And now we will consider step-by-step instructions on how to make such beads with our own hands, with a photo and video description.

You will need:

Beads blue
Fishing line
Clips for fastening beads
Connecting ring - 2 pcs.
Carabiner for jewelry

Progress:

We take a fishing line of the desired length and string beads on it, calculate the number of beads for yourself as you wish.
Once you've strung the beads, secure the bead clip to the line using an extra bead.
Now holding one free end, start stringing the beads onto the other side of the line after clamping.
On the other side, fasten the clamp in the same way.
Cut off the excess line.
We need to make 3 such parts.
On the one hand, we connect our blanks together with a ring.
We braid a tight braid from beaded blanks and fasten it with a ring at the other end.
Now attach the carabiner and our beads are ready!

Video how to make a braid beads with your own hands