DIY candy crown. Candy crown! MK Bouquet of sweets in the form of a crown

We need:

penoplex 0.25 thick
polyurethane foam,
glue gun,
3 packs of 2-sided tape,
glue "Moment Crystal",
flat head stationery needles 2 packs,
velvet a little less than 0.5 m,
gold braid,
rhinestone paths 3 m.,
assorted beads,
golden crepe and velvet tone,
Ferrero Rocher candies approx. 400 gr.

We draw 4 circles on the penoplex.

We draw 4 circles on the penoplex. Something like this

We cut out 2 circles and with the help of 2-sided tape we connect together - this is our basis

We decorate it with velvet-tone crepe on both sides.
We need one more detail - an arch. It is easy enough to cut it - by
the circle of the same plate that you use for the main parts.Cut out the arch and tape it with golden corrugation. Like this

Cut the remaining two circles like this

We wrap one side with a gold corrugation. I used 2-sided tape to keep it even

Inflate the foam on the reverse side. It is advisable to apply the foam on two halves at once, so as not to cut off later.

You can level the height of this cap right away. I must say right away that the foam is inflated onto the Penoplex. And the ends of the golden corrugation just need to be glued. When our
the hat is dry, we begin to decorate it. We take velvet and with the help
we beat our hat with needles.

After you have made waves from velvet, we proceed to decorate the rim with beads and rhinestones. And only after that we glue candies and beads
to the velvet hat.

On the gold crepe along the rim, I additionally attached a gold translucent tape to 2-sided tape, then attached a track from
rhinestone. Moreover, in the first version, I almost suffocated from the "Moment", but
the second one realized that the rhinestone track is easier to fix with the same
stationery needles. Then she attached the beads on a string to the hot
glue. Girls, IMPORTANT! I didn't use a pistol for a second. Especially
this is important for working on velvet! This glue snot is VERY hard to remove from
velvet, so I worked with tweezers and melted the glue over
candle.

We trim the base with velvet. And decorate it

We put everything in its place, fix it and glue it tightly with Moment Crystal glue. We decorate the arch

Here is such a beautiful gift idea!

With your own hands. But it turns out that candy and other materials can be made amazing compositions, which will become wonderful sweet gifts for your loved ones and will delight the eye.

Candy compositions will do for any festive occasion and will please everyone: women, children, and men. We offer you several master classes on making the most popular do-it-yourself candy compositions. Knowing the basics can help you get a little creative and come up with your own compositions.

DIY candy basket

Candy basket- one of the simplest candy compositions that is easy to make using a paper base. To get a neat basket, they usually use sweets in the form long sticks.

To work you will need:

- Candy

Light colored cardboard

Double sided tape

- Scissors

Let's get to work:

1) Have long chocolates fold your ponytails by gluing them to the sides with double-sided tape.

2) For the basket, you need a cardboard base, which you can make yourself, or use a ready-made one. Measure the height of the candy and measure out a rectangle on a piece of cardboard width corresponding to the height of the candy, and long, depending on the size of your future basket.

Fasten a sheet of paper in a shape cylinder and secure the edges with a stapler. On the 300 grams chocolates, a basket with a diameter of 7-8 centimeters.

3) Glue to the bottom of the cylinder round bottom... To do this, you can use a circle of loose paper by folding the edges and gluing them on the outside with glue. Then glue on loose paper circle of cardboard, which corresponds to the diameter of the bottom of the cylinder.

4) Stick strips of double-sided tape on the top and bottom of the outside of the cylinder.

5) Then, one at a time, begin to fasten candy.

6) You should get something like this uncomplicated basket:

7) Decorate the basket as an addition bow tying up a row of sweets. The basket is ready. Now you can put other candies in it or make several corrugated paper flowers.

Laptop made of candy

This original candy gift can be used as a basis for many other compositions. A laptop can be easily made out of the candy box, which is decorated with sweets on the outside. The box should have an opening and closing lid that will serve as a "monitor" for the notebook-composition. If you do not have a suitable box, the basis of the product can be made from a piece of styrofoam.

To work you will need:

- Sweets (flat and rectangular)

Styrofoam (thickness - 2 cm)

Glitter paper

Printed page showing the Windows splash screen

Paper knife

Thick wire

- Scissors

Let's get to work:

1) Lay out the flat candies to get outline of the future laptop and draw around the outline with a pen.

2) Cut from the foam around the contour two identical rectangles, then wrap each one in glitter paper or foil. These will be the main parts of the laptop - the monitor and the keyboard.

3) Take the first blank and glue in the center of it printout with a computer screen saver.

4) Lay out flat long candy from all sides of the picture.

5) Lay out the candies and glue them to the second blank, which will be keyboard... For example, like this, you can use more tall rectangular candy to get the keys:

6) Glue the candy to the outside of the laptop.

7) Cover with candy sides of workpieces, then only from three sides. You will need the fourth side of each to secure it. To do this, use thick wire, sticking it into the end of the monitor.

8) bend wire at the desired angle and insert the other end into the keyboard blank. To connect it to a monitor.

9) You will have an open laptop.

Here are some more options laptop made of candy, which will be a great gift for your beloved sweet-tooth men:

DIY candy tree

Very popular gifts for any special occasion - candy trees... There are several ways to make them, but the principle is the same: a round base, a leg and a pot.

Option 1:

This variant of the candy tree is the simplest. It will take you to make crafts no more than an hour... A variety of trees can be made on the basis of this product. It all depends on your imagination.

To work you will need:

- Sweets of various shapes (about 50 pieces)

Old newspapers

Wooden stick for the trunk

Glass or vase

Decorations (ribbons, colored paper)

- Scissors

Let's get to work:

1) Make from newspapers small ball of the desired diameter and wrap it with threads so that it does not unfold. From the bottom, stick a wooden stick that will serve as the trunk of your tree.

2) Stick the bottom end of the stick into a glass or vase and somehow strengthen to prevent the barrel from tilting. For example, you can fill a vase with the same newspaper or use a piece of styrofoam. The base for your tree is ready.

3) Make sure the barrel stood tightly in a vase and did not fall when you decorate your tree with sweets and other details. Start by attaching the candy. They can be glued with a glue gun. Better to use flat bottom candy, then it will be easy for you to unfold them right on the tree and eat.

As a basis for trees, you can take other, more professional materials, for example, foam ball and plastic stick which can be found in specialized handicraft stores:

As a basis, you can use liquid gypsum, which, when hardened, will firmly hold the trunk.

Working with plaster will take a little longer, although such a tree will eventually turn out more stable and reliable.

Option 2:

Original trees can be made from candies "Chupa Chups" or others chocolates on sticks... Moreover, these will not be simple candy trees: each such mini-tree will represent one candy.

To work you will need:

- Candy on sticks

Mastic (edible plasticine)

Spreading for cakes of different colors

Thimbles

Decorations for pots

Gypsum or hardening plastic

- Water

Let's get to work:

1) Insert the candy on a stick into the thimble and secure it with plaster or any other material that will work (for example, clay or salt dough). Let the base harden.

2) Unfold the candy, wrap it mastic and form a ball the correct shape.

3) After wetting with water, dip the candy in a container with sprinkles and roll it over so that small particles adhered to the tree.

4) Decorate the thimble ribbons or wrap in foil... Your candy tree is ready.

Similarly, you can do a big tree from round chewing gums.

Candy tree (master classes):

DIY candy cake

Candy cake- an original gift for a birthday or other holiday, as well as a beautiful craft that is easy to make. The composition is decorated candy flowers that can be made from corrugated paper. You can read more about candy flowers.

To work you will need:

- Candy

Corrugated paper

Styrofoam

Ribbons for decoration

Cardboard box

- Scissors

Let's get to work:

1) Cut out cake blanks from thick foam sheets: one larger, the other smaller. The size of the cakes will depend on you. Paste the blanks corrugated paper leaving beautiful edges on top.

2) Also cover with colored paper cardboard box which you will place on the topmost level and in which you can put small gifts and toys.

3) Paste the same paper over the top of the foam blanks and set all levels one on top of the other securing them well.

This is the basis for your future cake. Now you can decorate it with sweets. For example, you can place candy flowers and bouquets on top of it, or sweeten the sides by placing sweets on glue or double-sided tape.

Such a composition can be made from the same foam base by cutting it out in the shape of a triangle. It will turn out piece of candy cake.

One-deck candy cake from long and round candies and paper flowers:

This original cake is made from broken chocolate bars Kitkat and decorated with dragee on top M&M "s... Not bad idea for children's party or birthday... The chocolate bars were probably used without a backing, but held together with the help of a ribbon.

Candy grapes master class

Bunch of grapes made of sweets is an excellent and very original gift for those with a sweet tooth. It can be used as a separate gift, or to decorate any composition with it: a cake, a bouquet, and so on.

Option 1:

To work you will need:

- Round wrapped candies

Wire for bouquets

Details for decoration - leaves, ribbons, ladybugs, etc.

- Scissors

Let's get to work:

1) Make blanks for the bunch. To do this, use scotch tape for each candy attach the wire.

2) Then collect several candies (5-6 pieces) together and secure with tape or tape. For example, you can use colored tape to match the color of the wrapper, then the fasteners will not be visible.

3) Do several small bunches which you will then attach to the thicker wire.

4) When the whole bunch is ready, decorate it with leaves, ribbons and other decorations.

With the help of such bunches, you can decorate gift bottle of wine:

New Year's version with tinsel

What do you need:
Paper,
Self-adhesive paper, golden and red,
Cardboard,
Red crepe paper or fabric,
Tinsel golden and red,
Clay Moment, glue gun,
Sweets (the approximate amount depends on the size) by the type of truffles in a cone or balls in a golden wrapper 48 pcs., Small round or oblong in a golden wrapper 12 pcs., One large in a red wrapper with one tail - 1 pc.

How to do:
Print the template for the interior. 4 pcs.
Glue 3 segments together. So later it will be easier to connect into a sphere.
Glue the sphere.

Strengthen with cardboard strips. Can be pasted over with a cloth using PVA (optional),
Cover the crepe with red paper or red non-flowing cloth. Allow to dry well.

Cut out strips of cardboard approx. 2 cm. The length should be taken with a good margin relative to the inner ball. Try it on, see what length suits you.
If the cardboard is thick enough, then the sides are not needed.
If the cardboard is thin and does not spring well, make sides (stiffeners) of cardboard so that the form holds firmly.
Glue the strips to the sidewalls.

Paste the strips on both sides with self-adhesive paper. Outside - golden, inside - red.
On the inside, leave about 1 cm unsticked at the bottom. For this tail of the arc we will glue it to the inside.

Glue golden tinsel to the sidewalls, suitable in size and texture. The arcs are ready.

Cut out the lower part from thick cardboard, on which the crown will be. You can make a hole. Then you can hide a small gift in the crown.

Make the outer part of the crown out of cardboard. Cut the tape about 4 cm wide, slightly shorter than the base.
Look for the inner diameter. If the diameter of the attachment is 4 cm, then the diameter of the outer crown is 7 or 8 cm. This supply is just enough to glue the candies.
Trim the crown teeth evenly to your liking. Glue the crown.
Paste it over with shiny paper.